STB System-on-Chip prevents hacking of pay-TV signals.
To overcome vulnerabilities in established security architectures, STi7108 Set Top Box SoC features CryptoFirewall(TM) security core, which provides dedicated tamper-proof and emulation-resistant hardware designed to work with STB's conditional access system. CryptoFirewall has been developed specifically to meet pay-TV industry's needs and is suitable for satellite, cable, and IP-based pay-TV...
Read More »FPGAs target automotive applications.
Supporting memory access rates to 800 Mbps using integrated memory controllers, automotive-qualified XA SpartanÃ-®-6 FPGAs offer up to 75 K logic cells, 3.1 Mbits of block RAM, and 132 dedicated DSP slices for massive parallel processing at 250 MHz. Units with embedded 3.125 Gbps serial transceivers and PCIe interface cores are suited for chip-to-chip communications in automotive infotainment...
Read More »CCFL Controller IC increases LCD backlighting control.
Supplied in 28-lead, plastic SOIC, LX6502(TM) brings PureBLACK(TM) mega-contrast dimming to 24 V CCFL inverter applications in small- to large-sized LCDs. IC offers mega-contrast dimming and fully integrated on-chip 12 V gate drivers to support full-bridge, high- and low-side N-channel power MOSFET configurations with input voltages to 35 V. In addition to protection functions, product integrates...
Read More »Li-Ion Battery Charger integrates 2.3 A GSM RF test mode.
Housed in 3 x 2 mm, 10-pin TDFN package, Model MAX8922L includes GSM test mode, which facilitates production-line calibration and testing of devices with Micro-USB connector. Input is overvoltage protected to 30 V, eliminating need for external overvoltage-protection IC. Fast-charge current and top-off current thresholds can be configured using external resistor. Featuring 4.94 V LDO output to...
Read More »
PCB Fabrication Notes Guide
The overall purpose of your fabrication notes is to enhance Design for Manufacturability for optimal PCB fabrication and assembly while maintaining applicable industry standards and regulations.
Read More »
Up-/Down-Converting SiGe Mixer covers LTE/WiMAX/MMDS applications.
Supplied in 5 x 5 mm TQFN package, passive MAX2044 supports high- and low-side LO injection architectures for 3.1-3.9 GHz LTE and WiMAX base stations. It can also be configured for 2.3-2.9 GHz LTE, WiMAX, and MMDS high-side injection architectures. As downconverter, IC provides 32.5 dBm of IIP3, 21 dBm of IP1dB, 7.7 dB conversion loss, and 8.5dB noise figure. When configured as upconverter, it...
Read More »AM/FM Receiver IC brings digital capability to analog radios.
Model Si4830 offers full AM/FM radio from antenna input to audio output. Compact design, which requires 12 surface-mount components in 20 mm2 single-side board area, allows for AM/FM functionality in various radio products. Unit eliminates need for external MCUs, AM/FM filters, and tuning inductors. Supporting European EN55020 compliance, CMOS wheel-tuned AM/FM radio receiver IC provides accurate...
Read More »
Server Rack Enclosure holds up to 2,000 lb static load.
Suited for all rack-mounted server and storage products, HP v142 enclosure is 19 in. server rack with front door that is 63% perforated for efficient airflow and cooling. Product has front/rear door handles for security, side panels to ease mounting, welded frame, and is compatible with variety of cable management accessories. Enclosure also has zero-U mounting areas to maximize space for servers...
Read More »
Ruggedized Lithium Coin Cell Holders have low-profile design.
Low Profile Lithium Coin Cell Holders securely retain No. 2450 Lithium Coin Cells under shock and vibration conditions in high-density PCB applications. Featuring dual-spring contacts, polarized products may be used with most vacuum and mechanical pick-and-place assemblies. Parts are manufactured with .008 in. thick phosphor bronze and gold plate over glass-filled LCP base, rated UL 94V-0.
Read More »
Wall-Mount Enclosures allow scalable component mounting.
Available in 30 metric sizes from 300 x 300 x 225 mm to 1,500 x 900 x 425 mm, Hoffman FUSION G7(TM) Global Wall-Mount Enclosures include galvanized back panel and removable bottom gland plate that facilitate cable entry modifications and wire installation. Internal mounting accessories include full- and half-height back and side panels, front to back side-mount brackets, DIN rail adapter...
Read More »
Lithium Vertical Battery Holders suit single board computers.
Designed for CR1632, BR1632, or DL1632 size batteries, Series BV-1632 and BV-1632-G require less than 14 mm in height on top of PCB and measure 19 mm long and 5 mm thick. Coin cell holders snap on to standard 0.062 in. thick PCBs using 3 plastic latches and 4 solder points for stability. Units feature glass filled nylon plastic body, and positive and negative contacts made of phos-bronze with...
Read More »
Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »
