Control Chief Corp.    Bradford, PA 16701 0141
Apr 03, 2006 Designed for use with Allen Bradley SLC-500, High Current Relay Output Module handles load connections up to 10 A/relay contact without use of intermediate relays. Module features 8 output bits, one for each relay, and all 8 NO relays are electrically isolated and rated for continuous current. Input bits provide feedback for continuously monitoring status of relay coils. Output contact rating is 125 Vac, 10 A, ¼ hp and 30 Vdc, 5 A.

Pipeline Inspection Company Ltd    Houston, TX 77055
Mar 31, 2006 Model SPY® PT-101 pig transmitter with 1 in. dia and 4 ^3/16 in. length is suited for use in small diameter pipes. It is used in conjunction with receiver unit and wand to pinpoint pig's location. Unit has free air space pick-up range of 15-20 ft with underground depth range of 4-6 ft. Transmitter is powered for up to 60 hr by 3 V lithium battery.

ITT Industries Cannon    Watertown MA 02172
Mar 31, 2006 Featuring Canon CoF technology, filter connector provides standard filtering capabilities including individual isolated pin filtering of high-frequency noise, built-in ground plane barriers in the connector inserts, and filtering at face of system boxes. In MIL-DTL-38999 configurations, it meets MIL-STD and MIL-DTL Series III standard for thermal shock, random vibration, humidity, and high altitude. Light weight CoF connector suits military, aerospace, and industrial applications.

Advanced Power Technology    Bend, OR 97702
Mar 31, 2006 Housed in flangeless T3 package, Model ARF475FL uses 2 die configured for push-pull operation and is capable of 1,000 W pulsed output and 300 CW at up to 150 MHz. To obtain high power dissipation, backside of package is lapped to mate with system heat sink. Coplanar lead arrangement facilitates circuit layout and provides over 2,500 V isolation between any terminal and mounting surface. Applications include MRI, CO2 Laser RF sources, and RF Plasma generators.

Thomas & Betts Corp.    Memphis, TN 38125
Mar 31, 2006 Available in standard and self-contained models, Color-Keyed® Battpac® Battery-Powered 6-Ton Crimping Tools accept Color-Keyed CRCTBP1 Smart Batteries. Both tools feature 10,000 psi of operating pressure and crimp connectors from 8 AWG to 600 MCM in copper and 10 AWG to 400 MCM in aluminum (H-taps to 4/0). Both use T&B® Fittings 6-Ton dies and Blackburn® O and D dies as well as other manufacturers' crimp dies. Cutting head cuts cable up to 750 kcmil.

Thomas & Betts Corp.    Memphis, TN 38125
Mar 31, 2006 Color-Keyed® 14-Ton Hydraulic Crimping and Cutting Tools, available in manual and battery-powered models, protect operator hands and are suited for use in tight spaces. Tools provide 14.6 tons of terminal crimping and cable cutting force. In addition to dual-speed action pump, crimp tools use Color-Keyed® 15500 series crimp dies. Manual and batter-operated tools crimp up to 900 and 750 kcmil copper as well as 750 and 600 kcmil aluminum connectors, respectively.

Belden CDT    Fort Mill, SC 29715
Mar 30, 2006 Available for commercial network installation, Belden IBDN Cable Management Solutions help house, store, and protect data hardware and equipment and supply discrete components designed to simplify cable handling and routing. Products include floor- and wall-mount enclosures and racks of standard and custom design; standard or weather-resistant, nylon and Velcro cable ties; and Belden IBDN Surface Raceway System for wire enclosure applications.

Astrodyne Corp.    Mansfield, MA 02048
Mar 30, 2006 M/DRL Series Din Rail mount modules accept Universal Input of 85-265 Vac or 100-340 Vdc and provide single/dual/triple outputs. Fully encapsulated, UL/CSA/TUV/CE approved products feature integral LED indicator and output adjustment potentiometer. With operating temperature range of 0-50°C, modules mount to standard TS35/7.5 or 15 DIN Rails, and feature screw terminal I/O connections. Products suit instrumentation, industrial controls, transportation systems, and shipboard applications.

Nora Lighting    Commerce, CA 90040
Mar 30, 2006 UL- and cUL-listed Nora Rail system eliminates potential voltage drop or current deterioration, allowing for extended runs in commercial environments. In addition to fixtures that accommodate GU10, Par, and Bi-pin lamps, product offers low-voltage fixtures that utilize MR16 and AR111 lamps as well as HID and fluorescent fixtures, all of which may be utilized on same line voltage system. Bronze and silver finishes are available, along with selection of glass shades.

EGS ELECTRICAL GROUP ? APPLETON    Rosemont, IL 60018
Mar 30, 2006 Engineered to meet Class I, Division 2 hazardous location requirements, Wallmaster(TM) I/2 wall pack luminaire features enclosed and gasketed design that inhibits explosive vapors from entering. Alzak® finished aluminum reflector provides out and down light across wide area, while prismatic refractor delivers soft light with even distribution. Able to mount directly to any flat surface, fixture features die-cast aluminum housing with corrosion-resistant finish.

Mettler Toledo, Inc.    Columbus, OH 43240
Mar 30, 2006 Meeting IP69K, GMP, and EHEDG sanitation and hygiene standards, Model IND429 is dust-tight, can be cleaned with high-pressure equipment, and is suited for harshest environmental conditions. Unit interfaces with either analog scale or high-precision IDNet scale, delivering repeatable measurement data from milligrams to tons. Terminal offers Ethernet TCP/IP interface and comes standard with RS-232 serial port for further data collection or ticket printing.

Mi-T-M Corporation    Peosta, IA 52068
Mar 30, 2006 Suited for construction industry, 3,200 and 4,300 W generators utilize inverter technology to produce commercial-quality ac power for electronic equipment. They meet CARB and EPA emission standards and employ Subaru OHC engines with low oil shutdown and electric start. Roll cage design has 4 wheels, fuel gauge, idle control, fuel shutoff valve, voltmeter, hour meter, and double wall acoustical housing. Circuit breaker-protected units feature USFS-approved spark arrestors.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.    Maple Grove, MN 55369
Mar 30, 2006 With 130, 200, 300, and 500 gF actuation force choices, RoHs-compliant ST Series includes nominal and right angle versions. Heat pressure tab staking process prevents top and actuator separation from switch body, maintaining watertight seal integrity. Construction includes stainless steel cover with silver-plated brass terminals and silver-plated phosphor bronze contacts. Optional 130 gF stainless steel dome contact increases 100,000 cycle typ operating life to 1,000,000 cycles.

W.A.C. Lighting Company    Port Washington, NY 11050
Mar 29, 2006 Measuring 7 in. tall x 6¼ in. wide, Quick Connect G618 Series contemporary glass pendants are offered with blue, green, orange, purple, and white hand-blown glass shades. Using Quick Connect components, decorative pendants adapt to low voltage monorail system, monopoints, multipoints and low voltage wall sconces, line and low voltage track systems, and Flexrail2.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Mar 29, 2006 Loctite® 7703 Hand-held LED Light Source delivers immediate cure of Loctite® 3552(TM) and 3553(TM) Visible Light Cure Adhesives. It provides output up to 2.0 W/cm² of visible light irradiance, and measures 9 x 1 x ¾ in. High-powered, portable system features LED point light source with extended tip that cures adhesive joints up to ¼ in. square. It can use rechargeable batteries or ac adapter, and delivers instant on/off, and is suited for applications in crowded or hard-to-reach areas.

Elma Electronic Inc.    Fremont, CA 94538
Mar 29, 2006 Type 04 switch is available in over 100 standard configurations, and is used in applications as selector switch or audio attenuator. With up to 24 positions, it offers contacts in hard gold or gold flash over hard silver. Product is available with shaft dia of 6 mm and ¼ in., and works within specifications even after 25,000 switching cycles. Rugged switch is suited for medical, industrial, audio, and homeland security/defense applications.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Mar 29, 2006 Featuring one-part construction, VAZ-2T1-FK AS-Interface Flat-to-Round-Cable Converter is suited for use in narrow and low-profile cable channels as well as other space-critical locations. Product installs in under 1 min in most applications and is designed for use where AS-Interface and 24 Vdc external power need to be on one M12 connector. Products are suited where AS-Interface drives with motor starters are used and for connecting AS-Interface sensors.

Interpower Corporation    Oskaloosa, IA 52577-0115
Mar 29, 2006 Approved to Danish Medical Standard DK-2-8A, Interpower(TM) Danish Medical power cords and cordsets are available from stock with 0.75 and 1.00 mm² HAR cable in 2.0 and 2.5 m lengths, respectively. Molded products are RoHS-compliant and suited for medical equipment rated up 10 A with service at 250 Vac. While power cord has Danish Medical plug, HAR cable, and stripped conductors, cordset has Danish Medical plug, HAR cable, and one of 5 angled IEC 60320 C13 connectors.

Tundra Semiconductor Corp.    Kanata, ON K2K2M5  Canada
Mar 29, 2006 Based on Serial RapidIO Specification v1.3, Model Tsi578(TM) interconnects Serial RapidIO-enabled processors and peripheral devices, supporting aggregate bandwidth of 80 Gbits/s. It provides up to eight 4x mode ports or sixteen 1x mode ports, each configurable to 1.25, 2.5, or 3.125 Gbit/s. Switch can route packets to over 64,000 endpoints, independent unicast and multicast routing mechanisms, and error management extensions that provide issue notification to fabric controller.

C & D Technologies    Mansfield, MA 02048-1151
Mar 28, 2006 Model D1U-W-1200-12-HC front-end power supply delivers up to 1,200 W (220 Vac) and 900 W (110 Vac) from its 12 V main output. It features N+1 redundancy, hot-swapability, active current sharing on main output, I2C bus, status indicators, and over-voltage, over-current, and over-temperature protection. Available with standby output voltages of 3.3 and 5 V, product has overall dimensions of 304.8 x 120.7 x 40.6 mm and operating temperature range of 0 to +50ºC, and incorporates cooling fans.