Tyco Electronics/Raychem.    Menlo Park, CA 94025-1164
May 18, 2006 Suited for automotive industry, RoHS-compliant PolySwitch® miniSMDC and SMD terminal devices are available with voltage ratings from 6-60 V and hold-current ratings from 50 mA to 2.6 A. These PolySwitch PPTC (Polymeric Positive Temperature Coefficient) devices help provide resettable overcurrent protection in applications where conserving board space is critical. As SMD devices, products are available in standard 1206-3425 sizes.

Advantech Automation Corp.    Cincinnati, OH 45240
May 18, 2006 Designed for operation in harsh environments, ADAM-4150 digital I/O (DIO) module and ADAM-4168 relay output module are compact sensor-to-computer interface units that feature 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection. ADAM-4150 has 7 input channels and 8 output channels with overcurrent/short circuit protection, while ADAM-4168 has 8 form A output channels. Both have digital filter function and digital output support pulse function.

Advanced Analogic Technologies Inc.    Sunnyvale, CA 94085
May 18, 2006 Offered in Pb-free, 12-pin TSOPJW package, AAT1230 is suited for powering Organic LEDs (OLEDs) as well as general purpose LCDs and CCDs in portable systems. This 18 V, 100 mA product combines converter capable of reaching 2 MHz with hysteretic feedback loop-based control mechanism. Designed to minimize current losses, it has True Load Disconnect function that isolates load from power source when EN/SET is pulled low; leakage current is less than 1 µA.

Honeywell Power Supplies    Northford, CT 06472
May 18, 2006 Designed for use with video cameras and accessories, power supplies fit in 19 in. EIA rack and provide power options such as dual output 24 Vac/28 Vac or single output 24 Vac and 12 Vdc. All models have output distributed via 16 or 32 individually protected circuits. With flip of switch, voltage is converted in banks of 8 circuits, allowing voltage drop encountered by long wire runs to be accommodated for cameras that require it without impacting closer cameras with excessive voltage.

Streamlight, Inc.    Eagleville, PA 19403
May 18, 2006 Utilizing .5 W Rigel LEDs, Task-Light® 2AA provides up to 8 continuous hours at optimum output and 50 hours on low power, while Task-Light 3AAA delivers 5 continuous hours at optimum output and 45 hours on low power. Both feature deep reflective optics that generate 25 lumens. Equipped with 5 mm Nichia LED that produces 8 lumens, Task-Light 1AA provides up to 5 continuous hours at optimum output and 80 hours on low power. All are anodized machine aluminum with 2-stage, push-button switch.

Micro-Lite, Inc.    Three Rivers, MA 01080
May 17, 2006 Fully variable from 25-100%, LED-based Model LV1000 provides flicker-free, shadow-free 360° white light with Kelvin Color of 6,200°. Brightness can be controlled to optimally suit viewing requirements of each application. Unit's compact design allows maximum working room under microscope.

Woodhead Industries Inc.    Deerfield, IL 60015
May 17, 2006 Featuring unthreaded stainless steel connectors, BradConnectivity(TM) Ultra-Lock System meets stringent sanitary requirements of food, beverage, and pharmaceutical manufacturers. M12-compatible system is comprised of integrated distribution boxes and cordsets built on push-to-lock technology, which enables installation without turning coupler. Rated to IP69K, radial O-ring seal is operator-independent and maintains constant pressure seal against moisture.

Schott North America, Inc. Fiber Optics    Auburn, NY 13021 3120
May 17, 2006 Offered in lengths of 100-2,000 mm for web scanning applications, LED Lightline is focusable with acrylic cylindrical lens to achieve working distances from 50-100 mm. Maytec(TM) profile grooves on sides of housing allow flexible mounting into manufacturing line. LED board can be custom tailored to application in regard to homogeneity, intensity, or mixed-color requirements. Intensity control can be performed by dimmable potentiometer via constant current or by PWM via 0-10 V analog input.

Pass & Seymour/Legrand    Syracuse, NY 13221
May 16, 2006 Allowing for separate fan and light control, DEFL44L Decorator Fan/Light Combination Switch enables users to choose from 20, 40, or 60 min fan time delays. Green LED light facilitates location of On/Off light switch in dark. Available with ivory, light almond, and white overlays, switch is rated for 120 V, 500 W/4.4 A max, and is useful in bathrooms where proper ventilation ensures sanitary conditions.

Electroswitch, Unit Of Electro Switch Corp.    Weymouth, MA 02188 2913
May 16, 2006 Configurable for manual or motor operation, heavy-duty Rotary Tap Switches have continuous/intermittent ratings from 100/150 to 1,600/2,400 A at 600 V. Switches are designed to withstand severe shock and vibration and feature escutcheon, handle that accommodates 2 padlocks, and flame-retardant, nontracking insulation. Models rated for up to 1,000 A have lightweight glass-fiber-reinforced bases, and models over 1,000 A have fabricated bases.

Weidmuller, Inc.    Richmond, VA 23236
May 16, 2006 Packaged in die-cast aluminum housing with stainless steel locking system, RockStar® Connectors feature multi-layered surface sealing and laser-etched identification marking. Units are offered with 3-216 poles and ratings up to 1,000 V and 100 A, with and without ground connection. Connection systems include screw clamp, tension clamp, crimp, axial screw, and push-in direct connection. Versions are available with IP65, IP69K, and NEMA 4X ratings.

Amerlux Lighting Solutions    Fairfield, NJ 07004-2527
May 16, 2006 Delivering clean, uncluttered look for retail environments, Multiple Semi-Recessed Adjustables deliver aiming flexibility of track lighting with look of recessed lighting. MSRA provides accent only design in one-, 2- or 3-light configurations, while MSRA-3P combines accent and wall wash optics for lighting store perimeters. With lamp housings crafted of die-cast aluminum, both fixtures are compatible with 20, 39, and 70 W ceramic metal halide lamps.

Saelig Co., Inc.    Pittsford, NY 14534
May 16, 2006 Operating on 2.4 GHz ISM band, Series AWM630 transmits and receives wideband audio or video signals over range of 100 m. Compliant with worldwide wireless regulations, modules are suitable for NTSC and PAL video formats. Transmitter measures 30.6 x 28.6 x 3.7 mm, while receiver measures 40.64 x 30.68 x 6.00 mm, with current consumption of 55 and 140 mA, respectively, from 5 V supplies. Four-channel PLL synthesizer provides stable frequency selection.

Volpi Manufacturing USA    Auburn, NY 13021
May 16, 2006 High-intensity darkfield LED Ringlight features SMD LED illumination with working distance range of 0.8-2 in. and diameter of illuminated area ranging from 2.25-2.28, based on working distance. Homogeneous illumination makes defects appear bright while part surface remains dark. Ringlight is available with either red or white SMD LEDs.

Binder-USA    Camarillo, CA 93012
May 15, 2006 Suited for medical and industrial applications requiring EMI protection and IP67 sealing capabilities, 712 series circular connectors are field-attachable and available with straight and right-angle cable exits that support up to 5 mm dia, shielded or unshielded cable. Panel mount connectors are available in front- and rear-mount versions with solder cup contacts. DIP solder options are available in straight and right angle versions, with or without shielding ground tabs.

Electro Standards Laboratories    Cranston, RI 02921 3403
May 15, 2006 Model 7208 enables sharing of single DB15 interface device connected to Common port among 4 other devices connected to A, B, C, and D ports. Unit can only be switched remotely from DB9 female serial interface Control port located on rear panel. Switched DB15 female ports are transparent to all data, and all 15 signals of DB15 connector interface are switched. Product can be controlled by and communicate with any computer or terminal type device capable of generating ASCII commands.

Waldmann Lighting Co.    Wheeling, IL 60090-6051
May 15, 2006 Featuring 29.72 in. gooseneck, All-In-One LEDs includes attached universal mounting base, IP67 waterproof aluminum housing with corrosion-resistant coating, cord set, and choice of either 6 or 25° flood beam to meet application requirements. Protective ESD diode on LED circuit board eliminates static charging and polarity reversal. Providing 50,000 hr life, LEDs are suited for illuminating microscopes and machine environments such as vision systems and metalworking.

Cole Hersee Co.    Boston, MA 02127 2467
May 15, 2006 Available in On-Off or On-Off-On configurations, Illuminated-Tip Toggle Switch enables operators to identify switch position in one glance. Tip lights up as red in On position and white in Off position. Black plastic switch contains silver contacts to provide switching at 25 A and 12 Vdc. It comes with blade terminals, nickel-plated brass mounting hardware, and standard 15/32 in. -32 thread mounting stem.

LASELEC Inc.    Arlington, TX 76011
May 12, 2006 Offered in Q-CW model for pulsing currents and CW model for direct currents, computer controlled LYDYA(TM) Drivers are able to control diodes, diode bars, and stacks. LYDYA shunt diodes safety system connects to diode terminals to short-circuit them when they are not being used or are not connected to driver, and protects them from reverse currents and transient effects. Drivers integrate programmable current start-up ramp, and protect laser diodes from current overshoots.

Samtec, Inc.    New Albany, IN 47151 1147
May 12, 2006 Maximizing bandwidth per square inch of board area, DPAM/DPAF Series offers up to 168 usable signal pairs, which are on staggered grid to minimize number of grounds and to facilitate signal routing on boards. DP Array(TM) connector sets are available with 10 and 17 mm mated heights, and solder terminations are offered with tin-lead and lead-free tin alloy for RoHS compliance and lead-free reflow soldering.