Advanced Analogic Technologies Inc.    Sunnyvale, CA 94085
Aug 09, 2011 Operating from 2.7-5.5 V input and providing 2.5 A output current, Model AAT2138 features integrated, ±10% precision current limit load switch designed to safely regulate power in USB peripherals. Single chip device includes PFM/PWM modes, external synch clock up to 3 MHz, switching frequency of 2.8 MHz, and adjustable output voltage and current limit. Housed in 3 x 3 mm, 14-pin TDFN package, converter utilizes 1 µH inductor with no external compensation required.

Contech    Goddard, KS 67052
Aug 08, 2011 Suited for small- to medium-size PCB applications, PK7 Series AC/DC switching power supply provides 7 W output power and operates from 85-265 Vac at 47-440 Hz. Single-output models, available as 3.3, 5, 12, 15, and 24 Vdc, incorporate output over-voltage protection as well as short circuit protection. Encapsulated with thermally conductive potting compound in plastic resin and fiberglass case that meets UL94V-0, RoHS-compliant and UL-approved series is rated for 3000 Vac isolation.

Future Technology Devices International Limited    Glasgow G41 1HH  United Kingdom
Aug 08, 2011 Respectively offering 200 mA max output at 3.3 and 5.0 V, C232HM-DDHSL-0 and C232HM-EDHSL-0 USB 2.0 Hi-Speed to Digital Level Multi-Protocol Synchronous Serial Engine (MPSSE) cables can be used to communicate with devices using synchronous serial interfaces. Supporting transfer rates to 30 Mbps, both 0.5 m long cables connect devices with 3.3 logic level interfaces to USB and consist of FT232H USB interface chip on compact circuit board encapsulated into USB connector end of cable.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Aug 08, 2011 Supplied in 8-pin, 3 x 5 mm MSOP PowerPad(TM) package, TPS54062 synchronous 50 mA, 60 V SWIFT(TM) step-down regulator provides 90% power efficiency. Integration of high- and low-side power MOSFETs provides power conversion and transient protection to noise-sensitive applications/designs. Offering respective operating and shutdown current of 89 and 1.7 µA, converter can be synchronized to clock via fixed frequency and supports switching frequency range of 100-400 kHz.

Crydom    San Diego, CA 92154
Aug 05, 2011 Offering optional soft start, soft stop, and brake functions, DP Series is intended for DC load reversing applications up to 60 A at 48 Vdc. Units accept logic supply and input controls of either 4.5-15 Vdc or 18-32 Vdc. Housed in 75 x 105 mm panel mount package, RoHS-compliant devices feature 2.5 kV optical isolation. Power and load terminations are via screw terminal post, while input control is through 4-conductor connector.

CUI, Inc.    Beaverton, OR 97005
Aug 05, 2011 Suited for consumer electronics and electrical equipment, Mid-Mount Connectors include PCB 3.5 mm audio jacks and 2.5 mm center pin DC power jacks. Switch options for audio jacks include ring switch, tip switch, and 2 or 3 switch configurations. Fully shielded for EMI suppression, DC power jacks are rated 16 Vdc at 5 A. All connectors are RoHS-compliant.

Saelig Co., Inc.    Pittsford, NY 14534
Aug 05, 2011 Housed in half-rack 2U case with backlit LCD and keyboard with spin wheel control, 6 GHz Model TGR6000 offers low phase noise over frequency range of 10-6,000 MHz, with output from -110 to +7 dBm, adjustable in 0.1 dB steps. Frequency resolution is 10 Hz and internal time-base stability is better than 1 ppm. System incorporates advanced stepped sweep system, which allows both frequency and amplitude to be swept, with custom output level trim up to 100 points.

CW Industries    Southampton, PA 18966
Aug 05, 2011 Rated 16 A at 250 Vac, Model GRSN-2011-2002 features molded super structure that is rugged enough to be foot or hand actuated. Full size switch can be mounted securely in .550 x 1.125 in. panel opening requiring no screws or other fasteners. Standard model includes black housing and rocker knob, but can be molded in wide range of colors with special markings to suit requirements. Applications include appliances, lighting systems, medical equipment, vacuum cleaners, audio equipment.

NK Technologies    Campbell, CA 95008
Aug 04, 2011 With open collector transistor frequency output design, ATQ Series is used as input to high-speed counter or frequency PLC modules, panel meters, or programmable relays, to monitor machine current usage to within ±1% of range. Multiple ranges from 0-2 to 0-200 A are available to meet needs of particular applications. Split-core enclosure facilitates installation by eliminating need to disconnect monitored conductor to install sensor.

IKey Ltd.    Austin, TX 78754
Aug 04, 2011 Offering 1,700 and 1,000 nits of adjustable brightness, respectively, 15.1 in. Model FP15-PM-HB-1700 and 17.1 in. FP17-PM-HB-1000 may be read in any lighting condition, including direct and indirect sunlight. High-brightness, panel-mount displays, available with optional touchscreen, meet NEMA 4X specifications for protection against, dirt, debris, liquids, and corrosives; have 70,000 hr backlight life; and feature aluminum alloy bezel.

Unipower Corp.    Coral Springs, FL 33065
Aug 04, 2011 Available in AC or DC input versions, EASYMOD® Series Model AM120 provides full 120 W of output with forced air, 90 W with convection, and up to 180 W with fan-cover assembly. This 1U, 3 x 5 in. switcher operates from -40 to +85° and offers -40° start-up; up to 4 customer-specified outputs, with option to isolate V4; and voltages from 1.5-48 Vdc. All output combinations are pre-approved to cUL and TUV to 60950-1, 2nd edition, EN60601-1, CB; 400 Hz operation models can be provided.

Dialight Corp.    Farmingdale, NJ 07727
Aug 04, 2011 Delivering 93 lm/W, LED DuroSite® High Bay fixture has max output of 14,000 lm and consumes 150 W. Luminaire features anti-reflective coated Crystal View AR lens. This IP66-certified, UL1598A-listed, and IDA Dark Sky-compliant solution successfully endures more than one year of damp heat exposure (85°C at 85% RH), 60 cycles of humidity/freeze testing, and 17 weeks in ASTM 8-117 salt fog testing with negligible impact on light transmittance.

Larson Electronics, LLC    Kemp, TX 75143
Aug 04, 2011 Equipped with 100 ft of SOOW explosion-proof cord ending in type 1523 explosionproof twist-lock plug, Model EPL-FL1524-LED-100-1523 can be connected to explosion-proof outlets within hazardous workspace. Unit uses 15 W of power to produce glare-free flood of light suited for close work and inspection activities where contrast and color rendering are critical. Measuring 2 ft long, light is constructed of aluminum with annealed glass tube shield, and is resistant to damage from drops and vibration.

Carlo Gavazzi, Inc.    Buffalo Grove, IL 60089
Aug 03, 2011 Capable of switching up to 20 cycles/min with 4 million electrical cycle life expectancy, 3-pole Model RMD3H and 2-pole Model RMD2H are suited for controlling heating elements inside food ovens, warmers, and fryers. Units offer 2 voltage ratings of 240 and 277 Vac and 2 amperage ratings of 30 A up to 70°C and 40 A up to 60°C. Combining benefits of solid state technology with electromechanical relays, devices virtually eliminate contact arcing.

Lighting Services Inc    Stony Point, NY 10980
Aug 03, 2011 Combining LSI Track with 54 W indirect fluorescent uplight, Gemini Series can be joined together to make continuous straight runs of lighting with either 1 or 2 circuit 120/277 V track below. Units can be suspended from surface by field cuttable stainless steel cables, steel stems, or threaded rod. Each fixture is supplied with 2 single 48 in. long stainless steel aircraft cables, as well as splice kit to facilitate continuous runs.

Samtec, Inc.    New Albany, IN 47151 1147
Aug 03, 2011 Eliminating possibility of bent pins while providing reliable connection, SIR1 Series is suited for high-shock/-vibration applications. Board-to-board interconnect, designed for power or signal applications, has current carrying capacity range of 1.4-2.8 A per contact at 30°C temperature rise, depending on total number of contacts powered. Product has 6 mm profile and .100 in. pitch contact system and is available in single row with 3, 5, 10, and 15 positions.

United Electronic Industries    Canton, MA 02021
Aug 03, 2011 Intended for high-current switching and digital control applications, DNA/DNR-DIO-470 are 10-channel electromechanical relay boards respectively designed for use with UEI Cube and RACKtangle® I/O series. Each channel, configured as standard Form C (SPDT) relay, switches voltages up to 140 Vdc or 150 Vac and is rated for continuous operation at 4 A @ 30 Vdc and 5 A at 125 Vac. Switching rates up to 125 Hz are supported, and each relay is protected by on-board 8 A fuse.

LED Autolamps    Sutton Coldfield B76 1AL  United Kingdom
Aug 03, 2011 Measuring 10 mm D x 25 mm W, LED Interior Strip Lamps are available in 100, 150, 300, and 600 mm lengths with 12/24 V dual voltage rating. ECE certified units utilize cool white color LEDs to simulate fluorescent tube lights. Lamps are specifically designed for applications in fleets as well as for van converters, mobile workshops, and utilities' vehicles.

Platinum Tools    Camarillo, CA 93012
Aug 02, 2011 Double ended coax stripper, part No. 15020C, removes cable jacket and inner conductors in one step. Designed for professional contractors, compact tool features stainless steel blades that are pre-set for industry standard ¼ in. cable preparation. This eliminates need for blade depth adjustments, while 2 stripping ports accommodate range of cables. Supplied in plastic housing, stripper works with RG7/11/213/8 and RG59/6/6 Quad cable types.

PREMO Group    Barcelona   Spain
Aug 02, 2011 Designed for 3-phase uninterruptible power supplies without transformer, PFT Series offers currents from 3-150 A and working voltage up to 520 Vac, 50/60 Hz, providing high common mode attenuation and differential, as well as low leakage current. Units feature neutral filter and are available in variety of versions with fast-on connection and screws or terminal blocks.