Gentech International Ltd    Girvan Ayrshire KA26 9PS  United Kingdom
Jul 22, 2005 Pushed into 22 mm copper pipe, Models FS13 and FS14 do not require coupling and sealing components, compression fittings, or threaded connection. With sensor connected and mounted vertically in pipe, switches operate at liquid flow rate of 1 lpm and max pressure of 10 bar at 20°C. Units feature brass housing and noryl internal components, making them suited for domestic boiler heating systems, industrial circulating pumps, or liquid dispensing applications.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Jul 22, 2005 To help users set-up and control rack-mounted xSeries servers, 1x8 Console Switch (17351LX) provides 8-port, CAT5 switch for single-user local management of KVM server functions. IBM 2x16 Console Switch (17352LX) offers 16-port, CAT5 switch for 2-user local management of KVM server functions. Also available, 3M Console Switch Cable PS/2 (31R3130) and USB (31R3132) convert KVM signals for CAT5 cabling for servers with PS/2 and USB KVM ports, respectively.

Cherokee International, Inc.    Tustin, CA 92780
Jul 21, 2005 With 5:1 fixed-ratio, CBQ5 isolated intermediate bus converter delivers 9.6 V @ 33 A with max power density up to 245 W/in.³ and accounts for unregulated energy or battery systems. It functions with POL and discrete circuit designs that power microprocessors, other chipsets, and converters. Operating over 38–55 V input, dc/dc converter provides full power, up to 350 W, with efficiencies to 97% and measures 1.45 x 2.3 x .44 in.

Alpha-Core, Inc.    Bridgeport, CT 06608
Jul 21, 2005 Suited for small-volume users, 34–14 AWG Round Magnet Wire is stocked on 10 lb spools and used for board-mounted components in power supplies, voice coils in speakers, and motor coils. Tinned Solid Copper Wire, offered on 2 and 10 lb spools, is available round and flat from 36–22 AWG for use in pins and PCB connections. Also available, 30–9 AWG Flat Magnet Wire is suited for use anywhere compact coils and improved heat dissipation are desirable.

Highland Technology, Inc.    San Francisco, CA 94103
Jul 21, 2005 Electrical-to-Optical Converter, Model J720 and Optical-to-Electrical Converter, Model J730 convert logic levels to fiberoptic media for low-noise transport up to kilometers, with link jitter below 10 ps rms. Model J720 is powered by logic-level input, and Model J730 requires +12 V supply, user-furnished or from wall-plug power adapter. Model J730 provides digital logic output with risetime below 750 ps. Both use ST-connectorized 62/125 micron multimode fiber.

McDonnell & Miller    Chicago, IL 60618 5523
Jul 20, 2005 Universal Wire Harness is designed for use with RB-24 low water cut-off for 24 V residential hot water boiler applications. Field-assembled harness allows installing contractor to plug directly into OEM's wiring harness without cutting wires. Model UWH-RB-24-A is designed for atmospheric boilers with 6-pin aquastats or vent damper, while UWH-RB-24-S is designed for sealed combustion boilers that use integrated burner controls or electronic aquastats.

Servoflo Corp.    Lexington, MA 02421
Jul 20, 2005 Measuring 9 x 9 mm, Intersema MS5534B is an SMD-hybrid device with piezoresistive pressure sensor and ADC-interface IC. With power requirement of 2.2-3.6 V, sensor measures 0-1,100 mbar with temperature range of -40 to 125°C. Output is digital with 0.1 mbar resolution and relative pressure accuracy of ±0.5 mbar. Six readable coefficients are included with sensor for software calibration. Three-wire interface is used for communication with microcontroller.

Eraser Company, Inc., The    Syracuse, NY 13221
Jul 19, 2005 Model K8A uses 4 rotating carbide blades, operating in clockwise or counterclockwise rotation, that open and close concentrically around material to be stripped. Blade closing is controlled by electrical foot switch that activates air cylinder. Featuring adjustable blade depth and strip length, unit can end-strip or window-strip film insulated magnet wire from 11–28 AWG and end-strip extruded wires from 8–38 AWG.

NKK Switches    Scottsdale, AZ 85260-3420
Jul 19, 2005 With capacities from 3–25 A, electromechanical S series are available in configurations with 1–4 poles in 2 or 3 positions. Bat style toggles range from 12.0–18.0 mm in length and are brass with chrome plating. Panel sealed locking lever versions are rated to IP67 and prevent accidental actuation. Panel-mounted with 12.0 mm threaded bushings, products conform to standard panel cut outs and offer solder lug, screw lug, and quick connect terminal options.

Phihong USA    Fremont, CA 94539
Jul 19, 2005 With quick disconnect for 3 individual loads, 1,500 W, 1U Model PSM1554 accepts three PSM500 500 W power supplies. Unit is available with 48 V main and up to 30 A, and 12 V standby up to 4.5 A. Operating from input voltage of 90-264 Vac with active power factor correction, rack is hotplug and n+1 configurable for scalable and redundant applications. Each output is individually protected against overloads that cause overheating of wiring from excessive current.

Emerson Electric Co.    St. Louis, MO 63136 8506
Jul 19, 2005 With power density up to 108 W/in³, Astec AIF-300Vin Series can deliver up to 600 W of output power from input range of 250-420 Vdc. Series includes 6 models with single-output DC voltages of 1.8, 3.3, 5, 12, 15, 24, and 48 V. Operating at baseplate temperature range from -40 to 100°C, converters reach up to 90% efficiency at 5 V output. They provide monitoring, protection, and adjustment capabilities, as well as communication bus that stores end-user information.

Rockwell Automation    Milwaukee, WI 53204
Jul 18, 2005 Measuring 30 mm in diameter and available in 6 colors, Model 855D Control Tower Stack Light uses LEDs for resistance to shock, vibration, and heat. It features UL approved wiring and meets UL Type 4/4X/13, IP65 ingress ratings. Various mounting options with pre-wired bases can be applied to any customized stack light without additional modification. Three bases can convert voltage from 24 Vac/dc, 120 Vac, or 240 Vac to power 24 Vdc LED light and sound modules.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jul 15, 2005 Offering efficiencies up to 80%, SiP12401 boost controller and SiP12501 boost converter provide uniform, controlled brightness in backlighting applications. Model SiP12401 drives LEDs connected in series and has 1.8–5.0 V input voltage range. Designed to drive LEDs connected in parallel, SiP12501 accepts input voltages from 0.65–3.3 V and regulates output current up to 60 mA from 0.9 V input. Both have voltage-mode PWM design with internal frequency compensation.

Hubbell Inc. (Delaware) / Wiring Device-Kellems Division    Milford, CT 06460
Jul 15, 2005 BaseTrak® 2-and 3-channel non-metallic raceway systems feature data- or power-only accessibility and T-568 compliant bend radius. For application specific flexibility, offerings include 2-channel BaseTrak and snap-on 2-gang flush box, 3-channel BaseTrak full capacity 1-, 2-, and 3-gang boxes, and 3-channel BaseTrak 1- and 2-gang flush boxes. Impact-resistant, non-conducive design eliminates raceway cutting, and split-cover option is also available.

TRACO Electronic AG    Zurich CH - 8002  Switzerland
Jul 15, 2005 With immunity to vibrations and electrical disturbances, DIN Rail Mount Series TSP complies with EMC standards. Models are available with 12 or 24 Vdc outputs and 70–600 W output power with Power Good and Remote On/Off control functions. Units include dual-color LED status indicators, hot-swap/redundant operation, battery back-up, and voltage dip/brownout protection, as well as infinite short circuit, over-voltage, and over-temperature protection.

Phihong USA    Fremont, CA 94539
Jul 14, 2005 Suited for switch and PBX applications, 275 W Model PSM275-909 provides 12 Vdc output for switch, 50 Vdc per port in PoE, and can implement 8-24 ports in PoE system, making it suited for 10/100 BaseT Ethernet switches, security systems, VoIP systems, and blade servers. Powered from 90-265 Vac or 44-57 Vdc input, unit can be operated in redundant ac or dc configuration with external isolation diode. It includes programmable port control, power limiting, and port prioritization.

Para Light Corp.    Walnut, CA 91789
Jul 14, 2005 Manufactured with UV-free polycarbonate plastic casing, LLVM-000xx series employs red/green/blue (RGB) enhanced-power LEDs for indoor and outdoor applications. Tubes measure 3.15 in. in dia and come in 39.37 or 19.69 in. lengths, with 20 and 10 LEDs, offering total flux of 80 and 40 lumens, respectively. Products come with pre-programmed color changing sequence that can also be programmed to meet individual requirements.

W.A.C. Lighting Company    Garden City, NY 11530
Jul 14, 2005 Crafted of specification-grade, die-cast aluminum, Precision Spots feature concealed wiring and abrasion-resistant powder coat paint finish. They provide horizontal aiming and vertical locking capabilities. Designed for both low and line voltage track systems, units are available in white, black, and 2-tone black/platinum. They accommodate variety of lamps including Halogen MR16, AR11, PAR20, PAR30, and PAR38.

V-Infinity    Beaverton, OR 97005
Jul 14, 2005 With input of 6.0–14.0 Vdc, point-of-load Series VPOLXXX-12W is available in 10, 16, and 20 A models with output voltage from 0.75–5.0 V, which is trimmable via external resistor. Converters include remote on/off and output voltage sequencing, as well as protection against continuous short circuit, output over-current, and over-temperature. Operating from -40 to +85°C, units are suited for distributed power architecture applications such as mobile communications and computing.

Carmanah Technologies, Inc.    Victoria, BC V9A3S2  Canada
Jul 14, 2005 Edge-Lit LED Stop Sign is compliant with US Federal Highways Administration Manual of Uniform Traffic Control Devices. Light from high-flux, ultra-bright LEDs concealed in sign frame shines vertically through clear acrylic sheet and refracts outwards through sign legend for uniform illumination of sign face. Six foot sign requires less than 15 W, compared to 192 W for fluorescent sign. Retro-reflective construction ensures visibility in event of power failure.