L-Com, Inc.    North Andover, MA 01845
Aug 23, 2011 Available in 4 versions, 19 in. rack panels with right-angle CAT5e keystone-mount couplers accommodate needs of IT professionals who must maintain wiring closets. Products allow users to patch Category 5e cables at 90° angles. Available versions include 1 rack unit (1U) unshielded and shielded models with 16 couplers as well as 2U unshielded and shielded versions with 32 couplers.

Larson Electronics, LLC    Kemp, TX 75143
Aug 22, 2011 Rated IP68 and waterproof to 3 m, Model LEDPB10W-120X2E operates from 9-46 Vdc, throws light beam 1,250 ft, and is suited for marine and industrial use. It is available in 20° spotlight or 40° floodlight configuration. Constructed of heavy gauge extruded aluminum with unbreakable Lexan lens, light resists corrosion. Drawing 10 A and 120 W, light bar incorporates PWM technology, which allows it to automatically adjust power fed to each LED according to LED's temperature.

MaxLite    West Caldwell, NJ 07006
Aug 22, 2011 Designed for installation into T-bar grid (drop) ceilings, fully dimmable Direct-Lit LED Flat Panels offer CRI of 85 and produce even, consistent, shadow-free illumination with minimal glare. Products come in warm white 3500K and cool white 5000K models, both with power factor of over 98%. Operating on 120-277 V systems, luminaires have potential life of 50,000 hr and are compatible with building controls, motion sensors, timers, and daylight harvesting systems.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Aug 22, 2011 Available in AC and DC trip curves and with 1, 2, or 3 poles, Series NDB3-100 is suited for telecommunications equipment. Screw-mount units feature rated voltage of 230/400 Vac, 80 Vdc and rated current of 1-100 A. Hydraulic magnetic overload technology protects circuit in both overload and short circuit conditions. All models are RoHS compliant.

Memory Protection Devices    Farmingdale, NY 11735
Aug 19, 2011 Sitting through hole made in PCB, BU2032SM-JJ-MINI-GTR rises less than 2 mm above PCB with installed CR2032 battery. Assembly is facilitated by terminals at each end as well as supporting shoulders on both sides that also increase grip on coin cell. Gold-flashed, nickel-plated phosphor bronze contacts are corrosion resistant, and dual pressure contacts offer low electrical resistance and resistance to intermittent connections.

austriamicrosystems AG    Premstatten   Austria
Aug 19, 2011 Supplied in 3 x 3 mm TQFN package, synchronous AS1328 can deliver up to 3 A output current at output voltages as low as 0.6 V while operating from 2.7-5.5 V input over -40 to +85°C range. Fixed-output voltage versions are available in 50 mV increments, or output voltage can be set from 0.6 V to input voltage via external resistor divider. Along with 1.5 MHz fixed switching frequency, features include quiescent current draw of 25 µA, softstart, and internal compensation components.

Larson Electronics, LLC    Kemp, TX 75143
Aug 19, 2011 Measuring 4.8 in. long x 2.5 in. high, LEDPB10W-20E produces 1,720 lm of white light and can throw 500 ft long beam in spotlight configuration. This 20 W light bar, rated to IP68 and waterproof to 3 m, may also be configured with external controller for dimming, brightening, or producing strobing flash. Construction, with aluminum body, shatterproof Lexan lens, and stainless steel mounting hardware, resists corrosive effects of marine environments.

Heyco Products    Toms River, NJ 08753
Aug 19, 2011 Manufactured from corrosion-resistant 304 SS, HEYClip(TM) SunRunner(TM) clips aid PV module wire management. Products fit module frames up to .125 in. thick and features double-compression design that accommodates from one 12 gauge USE-2 to two 10 gauge PV-1000 solar wires. Also designed for use with other cables from .20-.30 in. dia, clips have smooth edges that prevent damage to cable insulation as well as locking tabs that securely fasten product to module extensions or other panels.

Lamar Lighting Co., Inc.    East Farmingdale, NY 11735
Aug 19, 2011 Available in 12 in. (250 lm), 18 in. (470 lm), and 24 in. (640 lm) sizes, 1 in. deep LED undercabinet luminaires are constructed of extruded aluminum with white powder coat finish and tempered glass micro prism diffuser. Up to 32 fixtures can be linked together with connector cords or double-ended connectors for continuous mounting. Along with Nichia LEDs, which have 50,000 hr rated life, these direct-wired or plug-in fixtures have rocker switch and die cast coupler.

Larson Electronics, LLC    Kemp, TX 75143
Aug 19, 2011 Approved for Class 1 Division 1 and Class 2 Division 1 and 2 locations, EXP-EMG-12W-2L incorporates rechargeable Nickel-Cadmium battery that provides 90 min of operation if power failure or current interruption. Light contains two 6 W LED lamps and provides up to 10 years of operation. Battery is recharged automatically during normal operation, integrated pilot light lets operators verify presence of AC current, and test switch provides confirmation of proper emergency operation.

Compac Engineering Inc.    Paradise, CA 95967
Aug 19, 2011 Suited for OEM applications where detection of cold/high temperature limits is required, Series 11 senses temperatures from freezing to 90°C, in 16 narrow, differential preset trip points. Because they have no built-in differential, switches are creep mechanisms characterized by slow make/slow break and rapid cycling capability. Each consists of bi-metallic sensing mechanism packaged in corrosion-resistant plastic sheath, which incorporates hex section, sensing section, and 1/8 NPT thread.

Schaefer, Inc.    Hopkinton, MA 01748
Aug 18, 2011 Available in versions to meet EN60950 or EN50155 standards, PRP-1500 Series provides up to 1,500 Va of power in package that can be chassis mounted, DIN rail mounted, or fit into standard 3U Eurorack. Standard input voltages of 12, 24, 48, 72, and 100 Vdc are inverted to adjustable 120 or 230 Vac outputs, which are regulated to 4% or better. Operating from -25 to +70°C, all sine wave inverters feature overload protection and efficiency ranges from 86-90%.

Ametek Programmable Power, Inc.    San Diego, CA 92121
Aug 18, 2011 With full-scale output voltages ranging from 10-800 Vdc, AMREL(TM) ePower® SPS Series delivers up to 15 kW at 20 Vdc output and 12 kW down to 10 Vdc output in 3U package. Depending on output voltage, single 3U to 6U chassis can deliver 4-30 kW of power. Chassis can also be paralleled to achieve up to 150 kW output. Providing both automatic constant voltage and constant current mode crossover, switching power supplies include remote sense, which corrects for errors from line voltage drops.

JKL Components Corp.    Pacoima, CA 91331-2376
Aug 18, 2011 Used where space is limited and brightness is required, ZLP Low Profile Series mounts on flat heat sink and has pitch that produces appearance of solid line of light. Individual bars, available in 1.6 and 3.5 in. lengths, deliver up to 100 lm/W and are offered in shades of cool, neutral, and warm white. Each bar offers dual connection, enabling several to be connected together for use as continuous parallel or planar light source.

Alltec Corporation    Canton, NC 28716
Aug 18, 2011 Compatible with most data protocols and connection types used by communication equipment, PowerTrip® KSB Series routes intense levels of surge current safely to equipment ground and away from sensitive data circuitry. Units neutralize damage causing potential of lightning induced surge energy before it overloads data circuits. Devices come in DIN and multi-port rack installation configurations as well as in-line installation packages utilizing modular connectors or terminal blocks.

Larson Electronics, LLC    Kemp, TX 75143
Aug 18, 2011 Incorporating 1,500 W metal halide lamp and stand-mounted ballast, Model WAL-TSL-1.5XM produces beam capable of reaching over 2,400 ft in length. Spotlight sits atop 3 ft tall aluminum pole equipped with mounting base for permanent attachment to flat surfaces. Featuring fully adjustable design, light head can be moved throughout full range of motion to track moving objects. Model WAL-TSL-1.5XM operates with voltages of 120-277 Vac for connection to variety of power sources.

Larson Electronics, LLC    Kemp, TX 75143
Aug 18, 2011 Approved for Class 1, Div 2 hazardous locations, Model HAL-2X400C carries two 400 W metal halide lamps with combined total of 72,000 lumens, and illuminates up to 50,000 ft² of workspace. Lamps are mounted to aluminum-framed, rubber-wheeled cart via adjustable and removable mounting bracket. Constructed of powder coated aluminum with stainless steel hardware, weatherproof lamp housings resist corrosion. Cart includes 250 ft of SOOW explosion proof cord ending in ECP1523 plug.

CUI, Inc.    Beaverton, OR 97005
Aug 17, 2011 Packaged in 2 x 1 in. footprint, VYB Series is suitable for portable, battery-driven applications. Units accept input voltages of 9-36 or 18-75 Vdc and provide output power from 10-20 W. Available in +3.3, +5, +12, or +15 Vdc single output models as well as ±5, ±12, or ±15 Vdc dual output models, converters operate from -40 to +85°C and provide 1,500 Vdc input to output isolation. Outputs are fully regulated to within ±0.5% over all line input conditions and ±1.0% for all load conditions.

WAGO Corp.    Germantown, WI 53022
Aug 17, 2011 Suited for restricted installation depths, EPSITRON® COMPACT complies with DIN 43880 specifying equipment dimensions for distribution and meter panels. Products range from 30-100 W, provide 12 and 24 Vdc output, and operate from 85-264 Vac. Tolerant of supply network voltage fluctuations, power supplies carry Protection Class II rating and utilize Constant Current Mode for switching-in loads with high inrush currents. Mounting options also support building automation.

4K Solutions    Midland, GA 31820
Aug 17, 2011 Housed in 1U rackmount enclosure, 1U Global UPS(TM) accepts input voltage of 90-230 Vac, provides 450 W power handling capability, and is designed for worldwide use. Unit prevents data loss, downtime, and equipment damage due to power outages, voltage fluctuations, and transient surges. Designed to maintain and regulate 120 V nominal output using battery power during brownouts and overvoltages, UPS has quad battery design that offers 10 min half load runtime and 2-5 min at full load.