SunPower Corp.    San Jose, CA 95134
Jul 06, 2007 Utilizing solar panels tilted at up to 25° to track sun throughout day, pre-assembled SunPower® Tracker minimizes land usage. Backtracking technology allows panels to change direction as necessary, avoiding shadows and preventing panel sun spots. With each module generating up to 2.5 kW of power, system can scale from 50 kW installations to large, multi-megawatt solar power plants.

TeraVicta Technologies, Inc.    Austin, TX 78758-4411
Jul 06, 2007 Switches rated from DC-7 GHz are offered in DPDT and SP4T configurations, both of which utilize High Force Disk Actuator (HFDA) technology. Promoting usage flexibility, DPDT is configured as 2 independent SPDTs and can handle differential signals or provide density improvements in multi-switch environments. With 4 integrated HFDA switch elements, each independently controlled, SP4T is suited for signal multiplexing or applications concerned with integration and insertion loss.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Jul 06, 2007 Model TPS40180 synchronous controller allows system designer to connect or stack together multiple power modules, resulting in high-density power supply that supports 10-200 A of output current. It supports wide input voltage conversion range of 2-40 V, and operates from 4.5-15 V power source. Device converts 15 V input to 0.7 V output at programmable switching frequency of 1 MHz per phase, which provides ripple frequency of up to 8 MHz at input and output during operation.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Jul 06, 2007 Available in 16-pin TSSOP package, Model TPS40195 simplifies power management design of LCD TVs and IP set-top boxes that use DSPs and FPGAs. Offering 250-600 kHz switching frequency, it can switch 180° out of phase when bi-directional synchronization pin is used as output to other buck controllers. Control and protection features include shutdown control, power good output, adjustable under-voltage lockout, selectable digital soft start, and programmable closed-loop soft start.

Veraz Networks, Inc.    San Jose, CA 95131
Jul 06, 2007 Enabling interconnection of any mix of traditional and IP-based voice networks, ControlSwitch Interconnect(TM) provides migration path from existing PSTN voice networks to IMS. It features directory services element that adds application layer capabilities for network transition, QoS-based routing module to meet custom SLAs by measuring network quality fluctuations and enforcing routing policies, and signaling element that enables backhaul of PSTN signaling over IP via M3UA protocol.

Omron Scientific Technologies Inc.    Fremont, CA 94555
Jul 05, 2007 Able to be mounted to accept actuator on left or right side without changing location of cable, D40A non-contact door switches offers high-visibility, 2-color LEDs that provide at-a-glance status indication at guard door for as-necessary adjustments. Auxiliary contact also allows for remote status indication. Single D40A controller may be used to monitor and connect up to 30 D40A switches. It can also be used as stand-alone safety controller.

Alpha Wire Corp.    Elizabeth, NJ 07207 0711
Jul 05, 2007 Manufactured using modified PVDF material that offers UL VW-1 flame retardency and low shrink temperature of 150°C, FIT®-CLEAR Tubing has effective operating temperature of -55 to + 175ºC with approximate shrinkage ratio of 2:1 at 150ºC. It resists mechanical abrasion, cut-through, and chemicals, including solvents. Applications include automotive wiring, jackets, and fuse coverings, as well as jacketing for resistors, capacitors, and other components.

Molex Inc.    Lisle, IL 60532-1682
Jul 03, 2007 Based on Molex small media interconnect (SMI), plastic optical fiber data link product offers seamless optical data links compatible with IEEE 802.3u. Surface or through-hole solder mounting options are available, and device offers duplex, push-pull positive latching. Available in active device transceivers, adapters, cables, and field termination tooling, system utilizes Firecomms RCLED-based 650 nm FOT TX/RX transceivers and offers up to 250 Mbps links up to 50 m.

Micrel Semiconductor Inc.    San Jose, CA 95131
Jul 03, 2007 Supplied in 2 x 2 mm MLF® package, MIC23050/1 are 4 MHz, 500 mA synchronous buck (step-down) regulators suitable for portable applications. Hyper Light Load(TM) enables these DC/DC converters to achieve over 85% efficiency at 1 mA while offering minimal ripple across all loads. Standard features include 2.7-5.5 V input, 0.6-2.5 V preset output voltage options, and 20 µA quiescent current. Model MIC23051 also features voltage scaling.

Fairchild Semiconductor    San Jose, CA 95134
Jul 03, 2007 Supplied in 1.00 x 1.37 mm WLCSP or 3 x 3 mm MLP, Pb-free FAN5350 achieves 94% efficiency in single-cell 2.7-5.5 V lithium-ion-powered portable applications. This 600 mA DC/DC synchronous buck converter features 3 MHz switching, which allows device to employ small chip inductors (1 µH) and maintain low ripple. Additional characteristics, such as 20 mV transient response, make unit suited for powering DSP core processors, application processors, and I/O interfaces.

Emerson Network Power    St. Louis, MO 63136
Jul 03, 2007 Measuring 4 x 7 x 1.5 in., Astec NTS503 is offered in 16.6 A convection-cooled model with 200 W output or 41.7 A fan-cooled version that delivers full rated output of 500 W up to 50°C with 30 cfm forced air. Digitally controlled product suits 1U-high rack installations and is also available with medical approvals. Both provide built-in control and monitoring features; auxiliary, always-on regulated 5 Vdc @ 2 A output; and 12 V output.

Phoenix Contact    Harrisburg, PA 17111 0100
Jul 03, 2007 Used for I/O and low-power terminations to PCB, QC (Quick Connect) 1.5 Insulation Displacement Connection (IDC)-based plug is designed on 5 mm pitch (centerline) spacing and comes with or without mounting flanges. Plug is available for 24-16 AWG wire and mates with company's 5 mm headers, enabling vertical, horizontal, or lengthwise PCB mounting. With use of screwdriver, plugs ensure positive, gas-tight connection. Product makes audible click to ensure proper mating.

ADC Telecommunications, Inc.    Minneapolis, MN 55440
Jul 03, 2007 FiberGuide is used to protect and route fiber optic patch cords, multifiber cable assemblies, and intra-facility fiber cable to and from fiber splice enclosures, distribution frames, and fiber optic terminal devices. It ensures that 2 in. minimum bend radius is maintained throughout for cable protection. FiberGuide optical raceway system is complete suite of products designed to ensure off-frame protection and ease of use for advanced fiber management.

BAXL Technologies    Bethel, CO 06801
Jul 03, 2007 Merlot Wireless LapJack(TM) enables wired and wireless delivery of broadband applications over any type of existing wiring, including copper. It provides secure performance for broadband-intensive applications such as VoIP, VOD, and IP-based video surveillance without requiring modems, power outlets, CAT-5 cabling, or changes to existing structures. Acting as Internet hot-spot, discreet wall-mounted device is suited for organizations with any type of multi-unit property.

Ideal Industries, Inc.    Sycamore, IL 60178
Jul 02, 2007 Featuring swept-wing design with hexagonal head, compact Twister(TM) LT wire connectors provide secure grip whether connected by hand or nut driver. Live-action square-wire spring threads onto conductors for secure connections. Connectors have deep, flared skirt to accommodate wire range from 2 #22-3 #12 AWG, and work with solid or stranded copper wire. They are rated to 600 V maximum in building wiring and 1,000 V maximum for signs or lighting fixtures.

BRW Technologies    Greenwood, SC 29649
Jul 02, 2007 Combining visual flow indicator and flow switch with LED flow switch status indicators, Torch Saver protects water-cooled welding equipment from loss of coolant. Standard mount model is designed for flow rates from 0.5-5 gpm, but models can be custom designed for flow rates up to 60 gpm. Using NC and NO contacts for connection to equipment, Torch Saver is suited for MIG, TIG, automatic, robotic, and laser welding.

Leica Geosystems Inc.    Norcross, GA 30092
Jul 02, 2007 Offered as Corner Cube reflector alternative, Break Resistant Reflectors (BRR) work with all models of Leica Laser Tracker in full range up to 40 m. One-piece stainless steel design, with collar around its optic aperture, facilitates handling and provides overall protection. Solution comes in 0.5 and 1.5 in. sizes, with centricity of ±0.0004 in. and respective weights of 0.25 and 6.88 oz. Use does not incur nor require continuous interferometer tracking.

Alcatel-Lucent    Paris 75008  France
Jul 02, 2007 Featuring 320 Gbps switching and multi-degree reconfigurable add-drop multiplex capability, Model 1850 TSS Rel 2.0 provides transparent photonic networking, multi-degree wavelength routing, SONET MSPP functionality, and Ethernet functionality. Including chassis for Ethernet access demarcation, Model 1850 TSS-3 provides 3 Gbps switching and targets networks for Ethernet business services and hybrid mobile backhauling.

CommScope, Inc.    Claremont, NC 28610
Jul 02, 2007 Z-IDC Block is designed for terminating outside plant line, exchange cables, and cross connect wires on main distributing frames and inside integrated cabinets. Dual-sided design allows test and protection access from both front and rear of connector, facilitating testing and cross connect terminations. Scalable insulation displacement connector features both 8- and 10-pair cartridge options equipped with gas tube surge protection that is required for VDSL networks.

CommScope, Inc.    Claremont, NC 28610
Jul 02, 2007 Offering 3-step connection process that does not require any tools, Tool-Less Insulation Displacement Connection (TIDC) is suited for stringent space requirements found in central office, mini-huts, and remote terminals. It provides high-density, interconnection through front access that delivers unobstructed cross-connecting and testing operations. Available in both gel-filled and non-gel-filled versions, product features both flush mounting and low profile mounting.