Advanced Energy Industries Inc.    Fort Collins, CO 80525
Jul 19, 2007 Providing repeatability in complex applications, Paramount(TM) System allows accurate process control and uniformity when etching and depositing anti-reflective coatings, hard masks, cap layers, and etch-stop layers required by next-generation nodes. Measurement technology and optional ultra-fast frequency tuning enable system to deliver precise power at 13.56 MHz fixed or variable frequency.

BEAR Power Supplies    Phelps, NY 14532
Jul 19, 2007 Operating from -55 to +85°C with no heat sink or electrical derating, BPS Series includes single-input, single-output isolated converters with input voltage from 3-15 Vdc and output voltage from 50-300 Vdc. Units offer typical efficiency of 90% and are suited for powering PIN diodes, avalanche photodiodes, and piezoelectric actuators. Housed in encapsulated package measuring 0.5 x 0.5 x 0.4 in., converters are available in through-hole and SMT versions.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Jul 18, 2007 Offering plug-and-play commissioning, Vibracon LVL-B Series has solid-state design that contributes to maintenance-free level sensing of fine or coarse-grained bulk solids materials. It requires no calibration and is insensitive to material build-up, external vibration, and flow noise. Each product features 10 in. vibrating rod, and extension pipes are available in 20, 40, and 60 in. sizes. Suited for hazardous environments, sensor is constructed of stainless steel.

RIA Connect    Tinton Falls, NJ 07112
Jul 18, 2007 Single pole, vibration-resistant Model ASM01Y allows connection of pinned components and individual solid wires ranging in size from 18-14 AWG, or stranded wires and ferrules. Device is THR compatible and can withstand soldering temperatures of 290° for 90 sec. Covering 3.5 mm², Model ASM01Y is suited for SMT applications and is available in tape and reel.

Linear Technology Corp.    Milpitas, CA 95035
Jul 18, 2007 Housed in 2 x 3 mm DFN package, Model LTC3538 delivers regulated output voltage at up to 800 mA of continuous current with input voltage above, below, or equal to output. Input range of 2.4-5.5 V and output range of 1.5-5.25 makes unit suited for single-cell Li-Ion/Polymer applications. Delivering efficiencies up to 96%, synchronous, buck-boost converter provides constant 1 MHz switching frequency, ensuring low noise while minimizing external component size.

Tekkeon, Inc.    Tustin, CA 92780
Jul 18, 2007 While providing up to 4 hr of power for operating laptops, myPower(TM) ALL Plus MP3450 can simultaneously charge other small portable electronic devices through on-board USB port. Rechargeable lithium polymer universal battery comes with 9 adapter tips, retractable USB cable, and voltage selector switch for setting appropriate voltage for particular portable device. Automatic reset upon adapter change provides added safety to protect connected device.

Quail Electronics    Livermore, CA 94550
Jul 18, 2007 Providing outlets on 180° axis, Rotating Power Strip is equipped with 6 rotating outlets and 2 fixed side outlets. It includes power push button, cord management design, EMI/RFI noise filter, surge protection, NEMA 5-15P rotating, NEMA 5-15R rotating, and 2,160 joules. Electrical rating is 15 A circuit breaker, 125 Vac, 60 Hz and 1,875 W.

Bridgeport Fittings, Inc.    Stratford, CT 06497
Jul 17, 2007 UL-Listed EMT concrete-tight, raintight connectors feature split-type gland ring that prevents conduit from turning when tightening hex nut. Fittings enable user to connect PVC Jacketed cable by stripping back cable, unscrewing hex nut, and pushing in cable and tightening. They are available in ½-3½ in. steel, ½-2 in. zinc, and 12/2 to 8/3 for PVD Jacketed MC cable.

XP Power    Sunnyvale, CA 94085
Jul 17, 2007 Comprised of 10 W (ECL10) and 15 W (ECL15) versions, ECL series is available in open frame PCB-mount, encapsulated PCB-mount, and open frame chassis-mount formats. ECL10 measures 1.0 x 2.0 x 0.9 in., offering 5.6 W/in.³ power density. Both ECL10 and ECL15 offer single output voltages of 3.3, 5, 9, 12, 15, 24, and 48 Vdc. Full power is supplied across entire input voltage range of 85-264 Vac or 120-370 Vdc, and are suited for use in Class I and II isolation systems.

austriamicrosystems AG    Premstatten   Austria
Jul 17, 2007 Supplied in 5-pin TSOT23 package specified over -40 to +85°C range, AS1323 step-up dc/dc converter delivers 100 mA output current from single AA battery, with possible fixed output voltages of 2.7, 3.0, and 3.3 V operating from input voltage from 0.75-2 V. Integrated low-voltage boot circuit ensures start-up, even with high load currents. Minimum start-up voltage, 0.95 V, is independent of load current, and internal synchronous rectification eliminates need for external diode.

Eaton Corp.    Cleveland, OH 44114
Jul 17, 2007 Conforming to UL 1053 ground fault protection standard, Cutler-Hammer® MP-4000 motor protection relay offers protection, fault diagnostics, power metering, and communication options such as Modbus RTU and Device Net. Voltage Transformer inputs enable protection functions and metering such as under/over voltage, negative sequence voltage, power factor, and frequency. Relay features Intel-I-Trip algorithm, voltage sag ride-through at 20 cycles, and motor start profile.

Sipex Corp.    Miliptas, CA 95035-1701
Jul 17, 2007 Available in 3 x 3 mm QFN16 package, Model SP7680 is targeted at backlighting main display, sub-display, and indicator functions. Seven LED driver channels are partitioned into 3 banks of 4 channels, 2 channels, and one channel, and each bank can be independently programmed through I2C interface up to 31 mA (63 mA for single channel bank) with 6-bit resolution. With -40 to +85°C operating temperature range, device operates at 2 MHz and utilizes 4 small capacitors.

Meter-Treater Inc.    Lake Park, FL 33403
Jul 16, 2007 Molded in high-impact ABS, Model CTI is fully CAT6 compliant and backward compatible for CAT5 and CAT5E applications. Unit provides bidirectional protection capability and meets channel limits in dB per ANSI/TIA/EIA-568B.2. With plug-and-play modularity, user removes patch cable from existing patch panel, snaps in CTI device, re-inserts cable, and makes ground connection.

Panduit Corp.    Tinley Park, IL 60477 3091
Jul 16, 2007 Featuring continuously molded design for consistent placement in tools, REEL SMART(TM) Ferrules are available in No. 20-14 AWG in strips of 50 and reels of 3,000-5,000. Seamless barrel design contains loose wire strands. Semi-automatic CT-100 Crimping Tool features rapid load design utilizing strips of ferrules. Multi-use 54 lb tool cuts, strips, and crimps wire.

Orange Research, Inc.    Milford, CT 06460
Jul 13, 2007 Adjustable flowswitches come in fixed-orifice models for 0-2 to 0-40 gph (liquid)/1.5-5 scmf (gas) and variable-orifice models for 0-1 to 0-30 gpm/1.5-10 to 1-100 scfm. They incorporate adjustable, hermetically sealed reed switches and suit line pressures to 5,000 psig. Fixed set-point flowswitches, available with liquid flow settings in 6 steps from 0.1-1.5 gpm, have solid brass or stainless steel pistons and pressure bodies and stainless steel springs, enabling use up to 1,000 psig.

Hewlett Packard    Houston, TX 77269-2000
Jul 13, 2007 With modular architecture that facilitates access to PDU outlets, HP 8.6 kVA and 11 kVA Power Distribution Units (PDUs) suit blade systems in dense data center environments. Each unit, which uses 3-phase input plug and has 6 IEC C19 outlets, consists of control unit and up to 6 optional extension bars. Control unit may be mounted in 1U/0U space, and extension bars mount directly to frame of rack in multiple locations. Extension bars have 7 outlets.

Tekkeon, Inc.    Tustin, CA 92780
Jul 13, 2007 Along with retractable prongs, retractable USB cable, and Mini USB adapter, myCharger(TM) package comes with several adapter tips for charging iPhone, iPod, and Blackberry devices as well as mobile phones by LG, Motorola, Nokia, Samsung, and Sony Ericsson. Optional adapter tips are available for other 5 V devices, including Bluetooth headsets, digital cameras, other mobile phones, MP3 players, PDAs, and portable media players. Optional travel pack includes international plugs.

Transitronix    Ronkonkoma, NY 11779
Jul 13, 2007 Medical Wallmount power supplies are equipped standard with over current and short current protection. Unit is RoHS compliant and approved to medical UL60601. Features include 0 to +40°C full power operational temperature range and single output voltage options ranging from 3.3-24 Vdc. Power supplies are offered in 10, 15, 18, 30, and 40 W versions with US, UK, Euro, and Australian-type plug styles.

Lenox Instrument Co.    Trevose, PA 19053 3427
Jul 13, 2007 Adaptable to most fiber optic illuminated borescopes, fiberscopes, and videoscopes, cordless Model 3000LS-3.5LED operates on 3 C-cell batteries for 24 hours before new alkaline or rechargeable batteries are needed. Illumination is delivered by 5,000-6,000° Kelvin LED light, which produces up to 110,000 lux at input to light guide. Weighing 1.4 lb with batteries installed in 11 in. handle, light source offers shock and impact resistance.

Chloride Systems    Burgaw, NC 28425
Jul 12, 2007 Wet/damp location listed Tuff-Act operates from -40 to +113°F, and includes Intelli-Charge diagnostics to monitor all critical functions. Energy Star rated unit features high-brightness LEDs and provides 120 min emergency power with sealed NiCad battery. Available in AC Only and Self-Powered models, unit features aluminum housing with impact-resistant, injection-molded polycarbonate covers and vandal-resistant and anti-corrosion coated hardware.