Eaton Electrical    Moon Township, PA 15208
Jan 08, 2007 Designed for residential electrical contract jobs, Premium CH loadcenters are available with Cutler-Hammer® plug-on neutral arc-fault circuit interrupter (AFCI) and ground-fault circuit interrupter (GFCI) to reduce installation time. Options eliminate need to wire neutral of breaker to neutral bar due to addition of metal stab on breaker that clips onto inboard neutral bar of loadcenter. Products also accept all standard CH circuit breakers.

Cherokee International, Inc.    Tustin, CA 92780
Jan 08, 2007 Measuring 1.61 x 4.00 x 14.25 in., CAR2500 series supplies datacom, telecom, and industrial applications with customizable power platform. It operates with 92% efficiency and has distributed power architecture offering 27 W/in.³ power density. In addition to onboard microcontroller equipped with 10-bit ADC, product features automatic fan speed control and support for interfaces such as I2C, PMBus, and Ethernet. Models CAR2548FP and CAR2548TN offer +48 and -54 V outputs, respectively.

Advanced Analogic Technologies Inc.    Sunnyvale, CA 94085
Jan 08, 2007 Enabling use of 1 mm high inductors, and offered in 2.0 x 2.1 mm SC70JW package, Model AAT1149 step-down converter delivers 400 mA of load current from input range of 2.7-5.5 V. Output voltage is programmable via external feedback resistors from 1.0 V to VIN. Providing current limit and over-temperature protection, converter features 45 uA load quiescent current, 3 MHz switching frequency, up to 98% efficiency, and operating temperature of -40 to +85°C.

TRACO Electronic AG    Zurich CH - 8002  Switzerland
Jan 05, 2007 Housed in 0.86 x 0.36 x 0.44 in. package, TMR-3 Series converter modules feature 2:1 input voltage ranges of 4.5-9, 9-18, 18-36, and 36-75 Vdc with outputs of 5, 12, 15, 24, ±5, ±12, and ±15 Vdc. All models feature full load operation over temperature range of -40 to +70°C, internal input filtration, 1,500 Vdc isolation, remote On/Off, and continuous short circuit protection. Lead-free and RoHS compliant, compact converters are suited for space critical applications.

Linear Technology Corp.    Milpitas, CA 95035
Jan 05, 2007 Operating at low duty cycles ranging from 2-90%, Model LTC3823 develops output voltages from 0.6 V to 90% VIN. Input voltage range is 4.5-30 V. Synchronous, step-down controller includes integrated PLL synchronization, output voltage tracking, and differential amplifier that provides true differential remote output voltage sensing of positive and negative terminals. Housed in 28-lead SSOP or 32-lead 5 x 5 mm QFN package, IC uses current mode control and can operate without sense resistor.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jan 05, 2007 QuickSwitch Model 6284 enables access to 2 ESCON Fiber Optic networks from one computer connected to ESCON COMMON port. Featuring MEMS-based multimode mirror switch technology, switch can be controlled manually via front panel pushbutton or remotely via RS-232 (DB9) serial port. Position is displayed on front panel LED or computer terminal via remote port. Insertion losses are under 1.0 dB, and switched Fiber Optic ESCON ports are transparent to all data.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jan 05, 2007 Acting as signal source with no optical loss, QuickSwitch Model 4289 allows access to any one of 4 separate fiber optic networks from one computer. Pushbutton switching eliminates need to plug/unplug fiber optic patchcords, minimizing connector wear. All 4 network ports are 1300 nm, 100 Mbps ST multimode fiber optic ports, and internal circuitry ensures isolation between networks/devices. LED display indicates switch position and fiber link presence.

Elma Electronic Inc.    Fremont, CA 94538
Jan 05, 2007 Offered in 1-10 wide options, lightpipes feature LEDs that transfer light to front panel with translucent coloration. Products are available in protruding styles or versions that are mounted flush with front panel. Capable of emitting light even when embedded deeper within panel, lightpipes have chamfered light coupling area that allows other LEDs to emit light perpendicular to circuit board. Combinations of single, dual, vertical, and horizontal configurations are available.

TE Connectivity Ltd.    Berwyn, PA 19312
Jan 05, 2007 Accepting RJ45 inserts for Ethernet communication applications, Series 45 is designed for Category 5 and 5e cable. Positive lock coupling provides reliable connections, while protective cap can be used to cover receptacles when not in use. Featuring IP67 sealing, RoHS-compliant connector is suitable for industrial machinery, diagnostics equipment, printers, and other locations where ruggedization and environmental sealing are necessary.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jan 05, 2007 QuickSwitch Model 4294 allows fiber optic device connected to unit's FC Simplex COMMON connector to access any of 4 fiber optic networks connected to A, B, C, or D ports. Offering optical scalability, remotely controllable FC Simplex A/B/C/D switch is designed with fiber optic mirror technology and is bit rate-, data-, and service/protocol-transparent. Switch has position memory, and position can be changed via front-panel pushbuttons or rear-panel RS232 serial remote port.

Universal Lighting Technologies    Nashville, TN 37214
Jan 04, 2007 Designed for F96T12HO lamps, Basic-12(TM) Model B295SRUNVHP replaces traditional magnetic T12 high-output ballasts in existing or new fixtures. Featuring universal input voltage of 120-277 V, unit provides 21 W savings when replacing magnetic ballast operating two F96T12HO lamps. Basic-12 is lighter than magnetic ballasts but has same mounting dimensions and wiring, and can also operate F48, F60, F72, and F84T12HO lamps.

E-Switch Inc.    Brooklyn Park, MN 55428 1514
Jan 04, 2007 Available in many different colors and illumination options, flush-mount LA Series features brushed aluminum bezel and is sealed to IP65 standards. RoHS-compliant units offer contact ratings of 5 A at 250 Vac, 5 A at 125 Vac, .2 A at 250 Vdc, and 6 A at 24 Vdc. Switches are available with incandescent, neon, or LED options and are suited for outdoor, industrial, medical, audio/visual, and gaming applications.

FSR Metal Products    West Paterson, NJ 07424
Jan 04, 2007 PathFinder Matrix Switchers feature 32 presets, RS-232 and IP Ports, as well as over 600 MHz of bandwidth with ±1 dB of flatness. Each supports split mode switching and can handle HD-compatible 720p, 1080i, 1080p, and digital cinema signals. Products are available in sizes from 8 x 8 to 16 x 16, including 12 x 8 and 16 x 8, and offer optional balanced stereo audio on all units.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jan 04, 2007 Featuring threaded FC connectors and 100/140 graded index fiber, QuickSwitch® Model 4294 4-Way All-Optic Simplex Fiber Switch is bit-rate and data transparent as well as service/protocol transparent. Remotely controllable switch allows fiber optic device connected to unit's FC Simplex COMMON connector to access any of 4 fiber optic networks connected to A, B, C, or D ports. When power is lost, switch automatically changes to default position and will continue to pass data.

KORENIX Technologies    Taipei 231  Taiwan
Jan 04, 2007 JetNet 5010G is equipped with 3 combo Gigabit ports, each combining small form factor plug-in and RJ-45 Gigabit copper port. Switch will automatically detect Gigabit cable connections priority for each Gigabit port. It supports Rapid Super Ring technology, providing network redundancy with fast failover time. Housed in aluminum extrusion case with IP31 rating, industrial managed switch features fan-less mechanical design that adapts thermodynamic technique to ventilate heat.

CI Lumen Industries    Hauppauge, NY 11788
Jan 03, 2007 Suitable for heavy industrial applications, LED Backlighting solution was developed for panels ranging in size from 5-19 in. and requiring brightness levels of 800 nits or more. Since no heater is needed, LEDs can be turned on to full brightness immediately, which is beneficial in military systems used in extremely cold environments where immediate activation is critical. Product lifetimes range from 60,000-100,000 hr with little or no degradation.

HTP Connectivity, LLC.    Parsippany, NJ 07054
Jan 03, 2007 Available in male and female versions, both with 3, 4, or 5 poles, 7/8 in. circular connectors feature field-attachable or molded PVC cables (right angle or straight) and receptacles. Connectors are constructed using metal housings with gold-plated surfaces for optimum contact efficiency, operate between -40 and +80°C, and carry IP68 protection rating.

Cummins Engine Co., Inc.    Columbus, IN 47202 3005
Jan 03, 2007 Designed for over-the-road trucks, ComfortGuard(TM) APU combines generator with tailored HVAC components. Quiet system offers solution to anti-idling regulations while reducing wear and tear on truck engines. Plug-and-play, 21 x 24.5 x 28 in. design facilitates installation via quick disconnects and pre-charged a/c lines. Equipped with Cummins alternator, unit produces 4,000 W @ 120 V, 60 Hz ac. It also produces up to 40 A @ 12 Vdc for charging truck batteries.

Components Corp.    Denville, NJ 07834
Jan 02, 2007 PCB-mountable, RoHS-compliant TP-104 Series are through-hole parts engineered for use on 0.062 in. thick boards. Suited for high-density PCB fabricators, products can be ordered precut to any of 30 positions and feature loop-style test points' plastic standoffs that facilitate polarization. Rectangular passage in molded standoff maintains wire form alignment. Low-profile series facilitates secure, non-slip grip of alligator clips, probes, J-hooks, tips, and grabbers.

CeramTec North America Corp.    Laurens, SC 29360
Jan 02, 2007 Available in 40 kV and 50 kV, Hermetic High Voltage Feedthroughs each have 10 A current carrying capacity. Units include weldable, ConFlat®, and ISO flange-mounted installation configurations. Corona-resistant cable assembly utilizes molded silicone body and silicone insulated cable in lengths of 8 ft. Built for extreme conditions, feedthroughs feature temperature capability of -269 to 450°C and are guaranteed to be leaktight to leak rate less than 1 x 10^-10 atc-cc/sec.