XP Power    Sunnyvale, CA 94085
Oct 19, 2011 Comprised of constant voltage and constant current LED drivers, DLG series meets needs of outdoor lighting, security, and machine vision applications. Waterproof units, efficient up to 90%, cover power ranges of 50, 75, 100, and 150 W. Available constant voltage outputs include +12, + 24, +36, or +48 Vdc, and +15, +30, +54, or +57 Vdc outputs are also available. Depending on power range, constant current outputs vary from 1.05-11.0 A. Input voltage varies from 90-305 Vac.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Oct 19, 2011 Suited for air and non-combustible compatible gases, Series AT2605 provides visual monitoring and electronic control of very low differential pressure. Dial gauge is complimented by 2-wire, 4-20 mA control signal utilizing Magnehelic® gauge mechanical design and Series 600 transmitter technology. Two-wire design simplifies any 4-20 mA control loop powered by 10-35 Vdc supply. Available in aluminum, flameproof ATEX enclosure can include gas window for viewing process pressure on gauge face.

Electro Standards Laboratories    Cranston, RI 02921 3403
Oct 19, 2011 Supplied in board-only configurations, Pathway® Models 4001 and 4002 allow sharing of 42 pins of device among 2 other devices and can operate as standalone switches or as master and slave pair. Units accept contact open/close signals from any external pushbutton switch to control sharing function and supply output signals indicating whether switch is in A or B position. In event of power loss, switches maintain last set position and continue to pass data.

Osram Sylvania, Inc.    Danvers, MA 01923
Oct 19, 2011 ULTRA LED A Line omni-directional light bulbs are available for replacement in two wattages. The 8 W is equivalent to 40 W incandescent and 13.5 W is equivalent to 60 W incandescent. ULTRA LED BR 30 and 40, which serve as replacements for equivalent 65 W incandescent models, come in 15 and 18 W varieties and offer options for spot or flood lighting. All products carry 25,000 hr life rating and produce soft white light (2700K).

Meyda Tiffany    Yorkville, NY 13495
Oct 18, 2011 Messina Two-Tier Chandelier (125373) features Faux Alabaster acrylic shade, which has marbleized appearance and 9 natural paper white shades: 6 on lower tier and 3 on upper tier. Suited for residential, hotel, and commercial applications, handcrafted fixture also features chrome-plated trim and has total height of 65-120 in. from ceiling and width of 60 in. Custom sizes, styles, and colors are available in addition to energy-efficient lamping options.

austriamicrosystems AG    Premstatten   Austria
Oct 18, 2011 With start-up configuration programming capability, AS3710/11 can be adapted to various processors as well as for last minute changes or fine tuning without design re-spin. Both models include 3 DC/DC, 4 MHz, step-down converters; 2 DC/DC, step-up converters; 8 LDOs; 4 GPIOs; 1.5 A charger; I²C interface; 3 current sinks; ADC; watchdog timer; and RTC. While AS3710 adds third booster, AS3711 adds 3 A step-down converter. Configuration options include selecting linear or switching charging.

CUI, Inc.    Beaverton, OR 97005
Oct 18, 2011 Available in +3.3, +5, +12, or +15 Vdc single output models and ±12 or ±15 Vdc dual output models, Series VYB10W-T, VYB15W-T, VYB20W-T, and VYC30W-T accept input voltages of 9-36 Vdc or 18-75 Vdc. All outputs are fully regulated to within ±0.5% over all line input conditions and ±1.0% for all load conditions. Featuring input to output isolation of 1,500 V, converters operate from -40 to +85°C and are suited for transportation equipment, mobile equipment, and telecom base stations.

Electrotech Sales Group, LLC.    Colmar, PA 18915
Oct 18, 2011 As part of combiner box, Distribution Blocks deliver output up to 1 AWG/130 A, offering solution for both power distribution and collection. DIN rail mounted units can also offer method for UL approved ground wire collection. Available in complete range of configurations and colors, outlet boxes provide power source in control cabinet for laptops, test equipment, and lighting.

Maxim Integrated Products    Sunnyvale, CA 94086
Oct 18, 2011 Supplied in 8-pin SOIC package, MAX16841 fixed-frequency LED driver for retrofit lamps provides flicker-free dimming from maximum light intensity down to zero intensity with both leading-edge (triac) and trailing-edge (transistor) dimmers. Constant frequency control optimizes efficiency at both low (100-120 Vac) and high (220-230 Vac) AC line voltages. Operating from 90-265 Vac input, driver prolongs life of LED lamps because it can operate without electrolytic capacitors.

Unirac, Inc.    Albuquerque, NM 87102-1545
Oct 18, 2011 Constructed of roll formed C-channel beams, ISYS(TM) Ground Mount (IGM) 2.0 is engineered to accommodate many foundation options. Design minimizes material use while maintaining structural integrity. Beams can also be stacked interlocked, conserving space and allowing more beams to be transported on fewer trucks. Also, design allows pre-assembly of module columns prior to installation, or parallel installation of foundations and racking simultaneously.

Gigamon Systems    Milpitas, CA 95035
Oct 17, 2011 Available with bypass protection in single- and multi-mode fiber configurations, G-SECURE-0216 enables intelligent distribution and management of traffic within enterprise DMZs. Inline switch can receive traffic at up to 10 Gb and distributes it to different 1 Gb security tools, up to 8 in parallel. Integration of session-based and application-based intelligence lets security teams distribute traffic loads based upon IP or MAC addresses as well as by application port number.

IOGEAR    Irvine, CA 92618
Oct 17, 2011 Utilizing lithium polymer battery technology, GearPower GMP6600P is suitable for charging tablets, smartphones, cameras, and other mobile USB and Micro-USB devices. Portable unit features 1 A and 2.1 A USB charging ports that allow user to charge 2 devices simultaneously. Supplied with protective carry pouch, power station includes smart LED battery capacity display as well as built-in short-circuit, over-charge, and temperature protection.

Electroswitch, Unit Of Electro Switch Corp.    Weymouth, MA 02188 2913
Oct 14, 2011 By allowing manually initiated time-delayed trip or close, Model TD-CSR provides safe means of mitigating arc flash danger in local circuit breaker operation. Flashing LED notifies operator of pending trip or close operation and serves as warning to evacuate arc flash area. Once local trip or close is initiated, 10-sec delay allows operator time to cancel pending operation. To avoid inadvertent operation, control pushbuttons must be depressed for 4 continuous seconds to activate 10-sec delay.

Harting KGaA      Germany
Oct 14, 2011 Available in 10/100 Mbit and 1 Gbit versions, RJ Industrial® Series RJ45 PCB Jacks can be integrated into all established IP 65/67 interface types, from PushPull through to Han® 3A. In connection with SMD LEDs on customer PCB, integrated light-pipes enable signaling of port status. Industry standard female connectors can be processed by all standard soldering methods such as wave soldering or SMT reflow.

Harting KGaA      Germany
Oct 14, 2011 Configurable FTS 3100s-A combines Fast Track Switching functionality with simple operation. Unmanaged switch can be set up with software tool, which lets users define speed, duplex settings, and mirroring per port. Preset PROFINET, EtherNet/IP, and Modbus/TCP profiles can also be selected. Two versions of managed Fast Track Switches are also available: 10 ports executed as RJ45, or 8 RJ45 ports and 2 SFP slots. These devices have PROFINET IO stack and LLDP.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Oct 14, 2011 Operating from one 1.8-5.5 V power supply, DG721/2/3 switches come in 2 x 2 mm TDFN-8 package and 5 x 3 mm MSOP-8 package. Operating from single or dual 1.6-5.5 V power supply, models DG2537/8/9 come in MSOP-10 package. All switches deliver bidirectional conductivity and are optimized for noise-sensitive signal switching. Fabricated with submicron CMOS technology, switches are suited for analog and digital signals and provide flat on-resistance of 2.5 ohm for minimal insertion loss and distortion.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Oct 14, 2011 Respectively supplied in 16-pin SOIC and TSSOP, LM3448 and TPS92070 are phase-dimmable, AC/DC LED lighting drivers intended for solid-state lighting applications. THe LM3448 adaptive, constant-off time AC/DC constant current LED regulator integrates 600 V MOSFET and is optimized for 2-8 W dimmable LED lighting drivers, and the TPS92070 flyback AC/DC constant current LED driver controller is optimized for 6-20 W dimmable LED lighting drivers. Both products feature various protection options.

ICS Electronics Corp.    Pleasanton, CA 94588
Oct 14, 2011 Intended for controlling test instruments, 488.2V4 driver applies to ICS' 488-USB2 USB-to-GPIB Controller, 488-LPCI PCI GPIB Controller, and to 488-PXI PXI GPIB Controller cards. Integrated 64-bit DLL lets user run program completely in 64-bit address range instead of converting to 32-bit DLL. Able to be installed on Windows XP/Vista/7 OS, driver automatically detects OS version and installs correct lower level drivers and utilities.

Cooper Lighting    Peachtree City, GA 30269
Oct 13, 2011 Available in 5 ¾ x 6 ¾ x 3 5/8 in. and 6 5/8 x 8 x 4 in. configurations, Lumark Crosstour(TM) LED Wall Pack Series includes 10 W/720 lumens, 20 W/1,360 lumens, and 30 W/2,240 lumens options with choice of white 5,000 K CCT or neutral warm 3,500 K CCT. Optical reflector projects light in forward throw direction, while full cutoff door provides focused illumination with no uplight. Constructed of die-cast aluminum, luminaires have sealed LED optical chamber and impact-resistant tempered glass.

austriamicrosystems AG    Schloss Premstaetten A 8141  Austria
Oct 13, 2011 Using 12 x 11 cross-plexed technique, Model AS1130 drives 132 LEDs, each with 8-bit dimming control and no external resistor required. Eight-bit analog current control allows fine tuning of each current source to compensate for different brightness of different colors, or to adjust white balance on RGB LEDs. Operating from 2.7-5.5 V over temperature range of -40 to +85°C, IC incorporates 36 frames of memory for small animations or for use as buffer to minimize host processor load.