Advanced Energy Industries Inc.    Fort Collins, CO 80525
Sep 17, 2007 Suited for large commercial, grid-tie installations, transformerless Solaron(TM) Inverter converts raw DC power from solar-cell arrays to AC-grid electricity. It features soft-switching technology, achieving 97% CEC efficiency and NRTL certification to UL 1741. Wide maximum power point tracking window ensures maximum, day-long processing power. With local and remote data access, operators can monitor system's performance and reliability from anywhere at anytime.

TURCK, Inc.    Plymouth, MN 55441
Sep 17, 2007 Model M27 Multifast molded 26- and 28-pin connectors provide power and signals to factory automation equipment in automotive, semiconductor, and material handling applications. Connectors can accomodate up to 18 AWG wires, and provide IEC IP 67 protection. Offered in male/female, straight/right angle, standard/custom lengths, and with PVC flexilife® cable, pigtails, or extensions, connectors can replace DB-25 styles limited to 30 V, and low current.

GE Company GE Industrial Systems    Plainville, CT 06062
Sep 17, 2007 Model Guard III Harmonic Mitigating Transformers are designed to curb harmonic current distortion in order to reduce transformer heating, and improve upstream power quality. Transformers utilize sine wave phase shifting and source impedance and are available in specific phase shifts of 0, 15, 30, and 45°. Units maintain NEMA TP-1 standards for energy efficiency, are compliant for LEED building specifications, and meet CAS C22.2 #47 UL 1561 NEMA ST20, and IEEE C57.110.

Honeywell Sensing and Control    Golden Valley, MN 55422
Sep 17, 2007 Safety Solutions Packages, comprised of bundled safety switches and safety control modules, facilitate machine safety planning process by providing ready-made physical protective guarding plan. Solutions cover machine protective guard applications such as pick and place packaging and assembly equipment, semiconductor manufacturing equipment, plastic molding equipment, woodworking, textile and printing machinery, and custom equipment.

Honeywell Sensing and Control    Golden Valley, MN 55422
Sep 17, 2007 Available with variety of actuators and special terminations, V-Basic Standard electromechanical switch (V15 series) promotes precision operation for applications requiring 100 g or more operating force and electrical ratings from 16-22 A. It withstands 50,000 electrical operations at full load or 5 million mechanical cycles for life of switch. Series accepts insulated connection and all quick connect receptacles.

Raycap Inc.    Post Falls, ID 83814
Sep 14, 2007 Utilizing Strikesorb surge protection device (SPD) technology, lightning protection upgrade kits replace failed DIN rail SPD components to enhance lightning protection systems of existing wind turbines. Kits cover several types of wind turbines and provide uninterrupted protection from direct lightning strikes up to 200 kA. They can sustain multiple and successive lightning strikes and power surges without requiring maintenance.

Electroswitch, Unit Of Electro Switch Corp.    Weymouth, MA 02188 2913
Sep 14, 2007 Series 101 Switches feature double-wiping, low-resistance contacts that maintain their set positions inside fully enclosed decks and deliver dc or ac switching. While single-hole mount versions have continuous ratings of 20 A @ 600 V, 4-hole mount versions offer ratings up to 200 A @ 600 Vac. Positive, 90° indexing, snap-action design results in make and break action, with ~10 msec transfer time. Rotation is unlimited and continuous in both directions, unless otherwise specified.

Tripp Lite    Chicago, IL 60609
Sep 14, 2007 Medical grade Mobile Power Retrofit Kit protects patient data from being lost or corrupted and features Isolation Transformer-Internal that provides UL 60601-1 compliance by managing current leakage. Also included, PowerAlert automatically saves open patient data files and safely closes applications upon loss of power. USB-equipped unit also features Automatic Transfer Switch-Internal, which lets power supply simultaneously run connected equipment while recharging battery module.

Littelfuse, Inc.    Des Plaines, IL 60016
Sep 14, 2007 Supplied in 0.397 x 0.123 x 0.123 in. package compatible with pick and place electronics assembly processes, Nano2 456 Series lets circuit engineers design-in primary and secondary over-current protection with single subminiature ceramic fuse. RoHS- and UL-compliant series, available in 20 and 30 A ratings, offers respective interrupting ratings of 100 A @ 125 Vac and 300 A @ 65 Vac. Applications range from PC servers to power supplies, wireless base stations, and storage systems.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Sep 14, 2007 Offered in 16-pin, 3 x 3 mm QFN package, Model TPS60250 charge pump DC/DC converter offers programmable current with I2C interface and drives up to 5 LEDs for main display and 2 LEDs for sub-displays. It features auto-switching between 1x and 1.5x mode charge pump, 3-6 V input voltage range, 64 dimming steps with 25 mA maximum, 4 dimming steps with 80 mA maximum, 2% current matching for sub-LEDs, 750 kHz charge pump frequency, and continuous 230 mA maximum output current.

Power-One, Inc.    Camarillo, CA 93012
Sep 13, 2007 Offering power density up to 56 W/sq in., SSQE48T20033 3.3 Vout, 20 A sixteenth-brick is suited for communications, data server/storage, and workstation applications. It has 36-75 V input voltage range and can withstand 100 V input transient for 100 ms. Featuring 0.374 in. profile, it includes on-board input differential LC-filtering, +10%/-20% output trim, and remote sense and remote on/off interface capabilities available with positive or negative logic option.

Power-One, Inc.    Camarillo, CA 93012
Sep 13, 2007 Designed for applications requiring several high-current rails, 600 W Series HP600 is available with up to 5 outputs from 0.8-48 V, plus 5 V standby power source. Hot-swap units feature backplane-mounted AC connectors, 85-264 Vac input range with PFC, I2C interface, and ORing diodes to support paralleling and current sharing for up to 4 outputs. Housed in 1U high enclosure with 11.5 x 5 in. footprint, devices include output overvoltage, output overcurrent, and over-temperature protection.

Aeroflex Laboratories    Plainview, NY 11803
Sep 13, 2007 Offering single-box radar testing solution, 6810 Series Microwave Signal Generators and 6820 Series Microwave Scalar Analyzers with Internal Pulse Modulator perform radar testing, calibration, maintenance, and repair in coax or waveguide media. Systems with modulator allow sensitivity and range measurements for radar receivers and enable user to test pulsed amplifiers under pulsed conditions. Option is available in 50 MHz to 18 GHz and 50 MHz to 40 GHz ranges.

Banner Engineering Corp.    Minneapolis, MN 55441
Sep 13, 2007 Designed for use with PICO-GUARD safeguarding system, PICO-GUARD(TM) Emergency Stop Button works in conjunction with PICO-GUARD Controller and other optical elements in personnel safety and equipment protection applications. Models are available with fiber entry/exit from same or opposite sides of IP65-rated, impact-resistant enclosure. Switch features bright red push-to-stop, twist-to-release button with yellow background and accommodates up to 3 E-Stops in series on single channel.

PulseTech Products Corporation    Southlake, TX 76092
Sep 13, 2007 Combining unique charge algorithm with battery evaluation capabilities, 12 V Xtreme Charge(TM) eliminates need for users to identify battery type or chemistry, to select and set any specific charge criteria prior to charging, or worry about charging in improper or potentially unsafe manner. Computer-integrated system determines and delivers appropriate amount of charge from .1-2.5 A, while PULSE technology minimizes sulfation buildup on battery plates.

Maxim Integrated Products    Sunnyvale, CA 94086
Sep 13, 2007 Integrating high-performance step-up regulator, 2 linear-regulator controllers, 5 high-current operational amplifiers, and logic-controlled, high-voltage switch with adjustable delay, Model MAX8795A is suited for LCD TV and monitor displays. It utilizes 1.2 MHz current-mode regulator with integrated 20 V n-channel MOSFET to provide regulated supply voltage for panel source drivers. Available in 5 x 5 x 0.8 mm, 32-pin TQFN package, device is specified over -40 to +85°C.

Power Sources Unlimited, Inc.    Wrentham, MA 02093-2210
Sep 13, 2007 Featuring wide input ranges of either 9-36 Vdc or 18-75 Vdc, Tracopower TEN-8WI Series of 8 W, 24-pin DIP dc/dc converters consist of 14 models with single or dual outputs of 3.3, 5, 12, 24, ±5, ±12, or ±15 Vdc. Features include remote on/off, 1,500 Vdc input-to-output isolation, fully regulated outputs, and comprehensive protection circuitry. RoHS compliant units are certified to 60950-1 standards, and have operating temperature of -40 to 85°C with derating after 75°C.

Lamar Lighting Co., Inc.    East Farmingdale, NY 11735
Sep 12, 2007 Featuring integrated ultrasonic technology, Ophelia Series is suited for areas where lighting is typically left on, but are not constantly occupied. Units are available in on/off controlled or bi-level with adjustable standby levels of 5, 10, 20, or 30%. Offered in 2-4 ft lengths, luminaires come in 1 or 2 lamp, T5 or T8 models with painted finishes or optional stainless steel. Applications include hotels, restaurants, medical facilities, and college dorms.

Staco Energy Products Co.    Dayton, OH 45403 1314
Sep 12, 2007 Available in models from 125-225 kVa, TreStar P Series is suited for applications with input voltage of 208 or 480 Vac. Online, double-conversion units feature digital control system to eliminate overloads, frequency variations, transients, flicker, and black-outs in real-time. Up to 8 modules can be installed in parallel for redundancy or additional capacity. Additional features include vector-controlled IGBT inverter, input circuit breaker, and battery management system.

RECOM Power Inc.    Brooklyn, NY 11201
Sep 12, 2007 Measuring 1 x 1 in. with 0.39 in. height, galvanically isolated RP15-SAW Series offers efficiency up to 87% and operates at ambient temperatures exceeding 60°C, without external cooling measures. Outputs are trimmable within ±10% of nominal output voltage. Housed in 6-sided nickel-coated copper material, converters feature 2:1 input ranges of 9-18, 18-36, and 36-75 V as well as 4:1 input ranges of 9-36 and 18-75 V. Output voltages are set at 3.3, 5, 12, and 15 V.