Astrodyne Corp.    Mansfield, MA 02048
Sep 19, 2008 Available in single and dual outputs from 3.3-15 Vdc, FED20W Series accepts inputs from 9-75 Vdc and provides output power of 20 W. All models contain short circuit protection, over-voltage protection, and On/Off control function. Internal input filter eliminates need for addition of external components. Providing 1,600 V input-to-output isolation, converters operate over temperature range of -40 to +75°C without forced cooling or output power derating.

Gigamon Systems    Milpitas, CA 95035
Sep 19, 2008 Available as accessory for GigaVUE® 420 Data Access Switch, 10GigaTAP optimizes network monitoring resources and data integrity. When installed at back of switch, unit splits and copies inbound and outbound optical data streams, then forwards replicant data to network monitoring tools at 1 or 10 Gbps. Device comes in SR-LC/Multimode for short reaches of 850 nm cables, LR-LC/Singlemode for long reaches of 1,310 nm, and ER-LC/Singlemode for extra-long reaches using 1,550 nm.

Meritec Div., Associated Enterprises    Painesville, OH 44077
Sep 18, 2008 Suited for InfiniBand and Ethernet CX-4 copper cabling applications, NX+ shielded multilane receptacle connector offers 20 Gbps per lane performance (80 Gbps for entire 4x connector) and meets footprint/operational requirements of SFF-8473 and SFF-8470. This 8 or 24 differential pair connector system exhibits less than 2% total crosstalk. It is also used for Link Aggregation or Backbone cable assemblies and multi-legged fan-out cable assemblies.

Lumex Inc.    Carol Stream, IL 60188
Sep 18, 2008 Including capabilities of through-hole, leaded T-5 mm epoxy lens LEDs, Series SML-H1505xxx-TR OctoLEDs have off-the-board height of 0.43 in. and footprint of 0.24 x 0.24 in. Available on standard 24 mm tape for automatic insertion, RoHS compliant OctoLEDs can withstand soldering temperatures of up to 10 sec at 255ºC. Units are available in full range of colors including red, yellow, green, blue, or white with variety of lens finishes, offering different viewing angle options.

Toshiba America Electronic Components (TAEC)    Irvine, CA 92618-1811
Sep 18, 2008 Supplied in 2.9 x 2.8 x 0.8 mm package, TB7102AF/TB7101AF ICs accept 2.7-5.5 V input, offer 1 A max output current, and exhibit 95% typ efficiency. Adjustable output voltage from 0.8-1 V typ is available in TB7102AF, while fixed output voltage is offered by TB7101AF. Intended for use as step-down converters in electronic devices, monolithic ICs integrate high- and low-side MOSFETs, PWM controller, and MOSFET driver. Low enable threshold voltage is 1.5 V.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Sep 17, 2008 Single-output HPH and UCH series, isolated to 2,250 Vdc, come in 61 x 58.4 x 10.2 mm package with open-frame construction. Utilizing full-bridge, fixed-frequency topology along with synchronous output rectification, HPH series offers fully regulated 3.3-12 Vdc output from 36-75 Vdc input and reaches up to 91% efficiency. Offered with 2.5-15 Vdc outputs and 36-75 Vdc or 18-36 Vdc input voltages, UCH series has semi-synchronous rectifier design and 92% optimal efficiency.

NKK Switches    Scottsdale, AZ 85260-3420
Sep 17, 2008 Available in single and double pole models with 2 or 3 maintained positions, S Series switches offer electrical capacity ranging from 15-20 A at 125 Vac. Suited for applications requiring safeguard against accidental actuation, they are panel mounted with 12 mm D-flat threaded bushings, constructed of brass with chrome plating. Panel sealed with rating of IP67, switches conform to standard panel cut outs, and come with hex nut, lock washer, and O-ring.

TDK-Lambda Americas Inc.    San Diego, CA 92154
Sep 17, 2008 Operating from 90-264 Vac input, NV-Power AC-DC power supplies feature integrated magnetics transformer, 8-bit MCU, and power densities to 19 W/in.³. NV-350 series offers up to 350 W of output power with input less than 180 Vac and up to 660 W continuous (740 W peak for 10 sec) with input greater than 180 Vac. NV-700 series provides up to 700 W of output power from less than 150 Vac and up to 1,150 W continuous (1,450 W peak for 10 sec) with greater than 150 Vac.

TRACO Electronic AG    Zurich CH - 8002  Switzerland
Sep 17, 2008 Offering 3 W of power in SIP 8 package measuring 22.8 x 9.2 x 11.2 mm, TMR-3WI Series comprises 16 models with 9-36 and 18-75 Vdc inputs and regulated 3.3, 5.0, 9.0, 12, 15, ±5, ±12, and ±15 Vdc outputs. Units include remote On/Off control, continuous short circuit protection, I/O isolation of 1,500 Vdc, and IEC/UL 60950-1 compliance. Operating from -40 to +85°C, converters are suited for space-critical, battery-operated applications.

Binder-USA, LP    Camarillo, CA 93012
Sep 17, 2008 With Biatec quick termination technology that allows wires to be attached without use of screws or soldering, Series 768 M8 connectors are suited for automation and network applications. Attachable with cable diameters between 3-5 mm and wire cross-sections from 0.14-0.34 mm², both male and female connectors are available in 3- and 4-pin versions and each version is fully mateable with other M8 connectors. Connectors are IP67 rated for protection from water and debris.

LDPI Lighting    Eau Claire, WI 54703
Sep 16, 2008 Permanent fixtures for hazardous locations, available in 4 and 8 ft lengths, are constructed from cold-rolled steel one-piece housing and finished with specular polished reflector. Lens design creates optimal lamp image definition using light and dark contrasts. Mounted vertically or horizontally, 4 ft 2-fixture and 3-fixture inspection light carts provide portable lighting. Attachment via swivel mounting brackets enables precise aiming of light.

Pilz Automation Safety L.P.    Canton, MI 48187
Sep 16, 2008 PSENslock series combines secure safety gate monitoring and non-contact magnetic interlock. Electro-magnetic holding force of 500 N prevents unintentional opening of swing/sliding gates, and transponder technology is manipulation-proof because switch and actuator are different items. Tolerant to gate misalignment, IP67-rated series is designed for applications up to SIL3 and offers flexible mounting options and double-sided LED diagnostics.

PowerGate LLC    Santa Clara, CA 95054
Sep 16, 2008 Consisting of 57 single-output models with outputs from 3.3-48 Vdc, Mean Well GS Series targets low-medium power applications with 18, 25, 40, 60, and 90 W platforms. Miniature desktop units consume less than 0.5 W standby power, and range in size from 3.66 x 2.1 x 1.42 in. to 5.71 x 2.36 x 1.26 in. All models are RoHS-compliant and include overvoltage/over-current protection. Typical efficiencies for 40-90 W units are in excess of 85.5% per EISA/CEC Level IV/Energy Star requirements.

Wieland Electric Inc.    Burgaw, NC 28425
Sep 16, 2008 Suited for high load applications such as power generation, motor connections for tracking systems, and inverting on-board voltage, PST 40i1 pluggable connectors carry their rated current in -40 to +85°C temperature range. Available as pre-assembled, over-molded, and cut-to-length cable assemblies or field-wired on-site, IP68 ingress protection rated, UV resistant, and TUV certified units feature rated voltage of 1,000 V and wire size of 16-8 AWG.

Calex Mfg. Co., Inc.    Concord, CA 94520
Sep 16, 2008 Designed for complete signal isolation, 8900 Series includes 16 dc powered signal conditioners to offer 8 inputs, including 0-50 and 0-100 mV, 0-5, 0-10, and 0-100 V, and 4-20, 0-20, and 0-50 mA, which can be combined with choice of 2 outputs. It employs 3-way signal isolation topology, where input is isolated from output and both are isolated from supply voltage. UL 508/1604 compliant series comes in 4.3 x 0.89 x 2.9 in. plastic case with built in DIN Rail mounting foot.

Pelican Products, Inc.    Torrance, CA 90505
Sep 16, 2008 Powered by 15 hr rechargeable battery, 9430 Remote Area Lighting System (RALS) offers up to 8 hr of peak brightness and takes 7 hr to be fully charged. It features swiveling telescope mast (extends to nearly 3 ft), 360° articulated light array, and wide area handle for gloved grip and transport. Unit's 24 next-generation LEDs and dual power mode (with water-proof switch) radiates 2,000 lumens in high and 1,000 in low. System is available in black and yellow.

UltraVolt Inc.    Ronkonkoma, NY 11779
Sep 16, 2008 CP Series can operate in constant-voltage, constant-current, or constant-power modes in bias, charging, and pulsed power applications, providing line regulation, load regulation, dynamic response, and stability. Each power supply has 0 to +10 V buffered and nulled monitors for voltage, current, or power, with automatic crossover from mode to mode, and each mode has 0 to +10 V remote programming. Series can supply 10 W with 10:1 output voltage range with maximum outputs as high as 15 kV.

Fenner Precision    Manheim, PA 17545
Sep 16, 2008 Made of semi-conductive polyurethane, Bias Charge Roller system offers eco-friendly alternative to corona wire as means of charging photoconductor for electro-photographic equipment. It specifically replaces corona wire in charging module of printing engine. Optimized for minimal ozone generation, product provides uniform charge distribution to organic photo conductor. Composite material is non-sparking and resistant to imaging oil in liquid toner applications.

Kim Lighting    City of Industry, CA 91749
Sep 16, 2008 Offered in 2 fixture styles and 5 finishes, LED Site Wallforms® Series features heavy-wall cast aluminum heads, and sealed fixture-to-wall junction with no exposed mounting hardware. Optical modules are engineered to produce asymmetric light distribution using horizontal lamp and flat tempered glass lens. Available with 30 or 60 W LEDs, luminaires are suited for use over doorways, ATM machines, and other public areas requiring wide, controllable light distribution.

XP Power    Sunnyvale, CA 94085
Sep 16, 2008 Measuring 3 x 5 x 1.3 in., ECM140 Series compact open frame single-output ac/dc power supplies require 10 just cfm of forced air-cooling to achieve full 148 W output. Including 5 models that provide outputs of 12, 15, 18, 24, or 48 Vdc, units typically achieve 88% efficiency above 70 W with flat efficiency curve. They meet IEC 60601-1/EN 60601-1 and IEC 60950-1/EN 60950-1 electrical safety standards as well as EN 55022 specifications for Class B conducted emissions.