Semiconductor Circuits, Inc.    Atkinson, NH 03811
Nov 30, 2011 Measuring 0.92 x 0.90 x 0.374 in., 32nd brick CPZ Series offers 2:1 input voltage ranges of 9-18, 18-36, or 36-75 Vdc and standard output voltages of 3.3, 5, and 12 V. Pick-and-place capable, surface-mount modules provide 2,250 Vdc input to output isolation and typical efficiencies exceeding 90%. Suited for space constrained applications, converters include fixed-frequency operation, remote sense, +10/-20% output voltage trim, and auto-restart OVP, OCP, and OTP protections.

E-Switch Inc.    Brooklyn Park, MN 55428 1514
Nov 29, 2011 Offering choice of 10 or 16 positions, RDM Series features contact resistance of 80 mW, insulation resistance of 100 MW min at 250 Vdc, and dielectric strength of 250 Vac for 1 minute. Contact rating is 42 Vdc, 100 mA switching and 42 Vdc, 400 mA non-switching. Operating from -60 to 125°C, switch comes with gold contacts and has life expectancy of 25,000 steps.

Schaefer, Inc.    Hopkinton, MA 01748
Nov 29, 2011 Measuring 5.5 x 12.75 x 19.5 in., AEP-5000 Series provides 5,000 W of power while accommodating space-constrained installations. Clean output, with less than 3% THD, is suited for powering sensitive loads and improving AC equipment performance. Available input configurations include 24, 48, 110, and 220 Vdc, while outputs are available in regulated 115 or 230 Vac, 50/60 Hz versions. Efficiency is rated up to 94%, depending on model, and EMI is minimized to Class B standards.

Bulbrite    Moonachie, NJ 07074
Nov 29, 2011 Available in 3 styles with 3 levels of brightness ranging from 29-72 W, 3-Way Eco Halogen A19 Series projects soft white light and maintains full light output during course of life. True Daylight Eco Halogen A19 Series, designed with neodymium glass to filter out unpleasant yellow hue associated with incandescent bulbs, projects light similar to sunlight while minimizing glare and fatigue. All Eco Halogens are dimmable and last up to 1,000 hours.

Meyda Tiffany    Yorkville, NY 13495
Nov 29, 2011 With total height ranging from 51-76 in. and 7.5 in. width, Caged Mini Pendant is designed with hand finished Timeless Bronze hardware surrounding Amber Mica shade. Transitional design fits into any interior decor and is suitable for hallways and corridors in residential, hotel, and commercial applications. Custom sizes, styles, and colors are available, as well as energy efficient lamping options.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Nov 29, 2011 Housed in SIP4 package, MEE3 Series offers 5 or 12 Vdc input and single nominal outputs of 5, 9, 12, or 15 Vdc. Three watt units feature typical efficiency from 83-89% and load regulation from 2.7-6.3%, with no additional forced air cooling or heatsinks required. Delivering full power across industrial operating temperature of -40 to +85°C, fully encapsulated converters provide 1,000 V input to output isolation and are suited for industrial and telecommunications applications.

Oclaro, Inc.    San Jose, CA 95134
Nov 29, 2011 MSA-compliant MI 8000XM employs PM-QPSK modulation format combined with coherent detection. Latter delivers scalability and flexibility needed for effective, efficient bandwidth transmission over fiber optic networks. Also included, low-power digital signal processor large-scale integrated (DSP-LSI) circuit offers correction of chromatic dispersion as well as polarization mode dispersion. Soft-decision forward error correction (SD-FEC) also enhances operation.

Green Watt Power    Concord, CA 94520-4841
Nov 28, 2011 With universal/full range AC input of 100-277 Vac, GLC-50 Series is available in 5 models with constant current output of 1.05, 1.40, 1.75, 2.1, and 2.8 A. Various models offer self-adjusting output voltage from 12-48 Vdc. All are enclosed in IP67-rated extruded aluminum metal case measuring 6.42 x 1.73 x 1.25 in. Providing efficiencies up to 90% with active PFC greater than 0.90, power supplies are suited for indoor/outdoor, signage, refrigeration, thermally harsh and damp environments.

Holophane    Granville, OH 43203
Nov 28, 2011 Featuring multiple LED boards with symmetrical or asymmetrical distribution and choice of wattage, Euro-styled GlasWerks® LED Luminaires are CSA listed as suitable for wet locations up to 40°C ambient temperature. Fixtures incorporate IP66 optics and IP55 housings. Available in arm or pendant mounted models, luminaires optimize visibility for city streets, parks, walkways, public squares, commercial developments, campuses, and parking lots.

Dorcy International    Columbus, OH 43217
Nov 28, 2011 Operating on 6 AA alkaline batteries that drive Cree XM-L LED module, Dorcy Metal Gear XLM (extreme lumen) LED aluminum flashlight is machined from aerospace grade anodized material and will run for 5+ hr on high setting and 25+ hr on low. Features include TrueSpot® Optimized Reflector System and side-mounted push button switch. Tested to ANSI FL1 flashlight standards, product measures 9 x 1.5 in., weighs 15.5 oz with batteries, produces 618 lm, and is IPX-4 water resistant.

Power Integrations, Inc.    San Jose, CA 95138
Nov 23, 2011 Supplied in eSIP(TM)-7F (L package) with 2 mm profile, LinkSwitch(TM)-PH targets LED replacements for fluorescent tubes. Products can be used where low-profile packages are required to fit into space available behind LED circuit board as well as other applications where board height is constrained. Heat transfer tab is located on top of these single-stage, primary-side controlled LED driver ICs, which feature greater than 90% efficiency and greater than 0.9 power factor.

Weidmuller GmbH & Co.      Germany
Nov 23, 2011 Featuring modular construction that uses 18 mm of rail width per phase, SPD II Series is UL 1449 Edition 3 approved to protect AC single- and multi-phase distribution circuits with nominal voltages up to 480 V, and safely discharge impulse surges up to 40 kA to ground. SPD III model, designed for single-phase devices, provides common-mode protection between Line, Neutral, and Ground with max discharge capacity of 20 kA. All DIN rail mount units are suitable for process control applications.

CW Industries    Southampton, PA 18966
Nov 23, 2011 Available in DPDT Center-Off construction with self-cleaning contacts, CW GRS - 6024 Series is rated at 40 A, 12 Vdc. Full size RoHS-compliant switches can be mounted in 1.58 x .948 in. panel opening requiring no screws or other fasteners. Made of heavy-duty nylon with copper alloy terminals and male .250 in. wide quick connect terminal for installation, units are suited for lift gates, sliding rooms, lift jacks, awnings, or downhole drilling apparatus.

Bud Industries, Inc.    Willoughby, OH 44094
Nov 22, 2011 Constructed from 14 GA steel with ANSI 61 grey powder coating, SPB Series meets NEMA 12/13 specifications. Cover has die-cut gasket for protection against dust, water, and oil. Cover screws thread into sealed nuts for additional sealing protection. Available in 4 sizes to accommodate either 22.5 or 30.5 mm push buttons, box can be mounted to wall or machine, providing protection for emergency shut-off controls in factory automation systems.

L-Com, Inc.    North Andover, MA 01845
Nov 22, 2011 Pre-mounted in stainless steel wall plates, WP Series Indoor Lightning and Surge Protectors mount to standard in-wall electrical/conduit boxes. PoE-compatible units come in 4 models with protection for Cat5, Cate5e, and Cat6 lines, shielded or unshielded, as well as telephone, DSL, and T1 lines, which feature 3-stage protection using thyristor diode technology.

Lighting Science Group Corp.    Dallas, TX 75201
Nov 21, 2011 Designed to meet critical requirements demanded by conventional 400 W HID fixtures, BayLight(TM) is suited for warehouses, distribution centers, manufacturing facilities, and cold storage facilities. Optional occupancy sensor is available to maximize energy savings. Thermal management of overall system and drivers gives BayLight L70 rated life of over 60,000 hr at 40°C and over 100,000 hr at 25°C. With IP66 rating for LED panel, BayLight is certified for damp locations.

M/A-COM Technology Solutions, Inc.    Lowell, MA 01851
Nov 21, 2011 MABA-000001-75KIT1 features 12 transformer models covering multiple impedance ratios and wind schematics. Transformer configurations include flux-coupled, transmission line, and auto transformer, and all parts in kit are SMT devices featuring ceramic, plastic, or FR4 substrates. Baluns meeting MoCA® and DOCSIS® requirements are also included, as is CD-ROM with datasheets, S-parameters, and application notes.

UltraVolt Inc.    Ronkonkoma, NY 11779
Nov 21, 2011 EFL Series simplifies designs that have electronics highly isolated and/or truly floating on high voltage. With this single encapsulated module, users have 30 kV isolated low-voltage power sources of +12 or +24, ±15, and +5 Vdc as well as 2 analog I/O channels and one DIO channel. Once designers apply power, signals, and controls to module, they have output isolated by 150 GW (15 kV) or 2 GW (30 kV) and ac leakage capacitance of less than 40 pF.

Zentrum Mikroelektronik Dresden AG    Melville, NY 11747
Nov 18, 2011 Housed in 5 x 5 x 0.85 mm QFN32 package, Model ZSSC1856 features internal 18-bit Sigma/Delta ADC with on-chip voltage reference and 2 input channels. Device uses less than 100 A in sleep mode and 10-20 mA in normal mode. Supplied with voltages from 4.2-18 V, AECQ100-qualified IC is directly connected to vehicle's battery and operates from 40-125°C. Applications include start/stop systems and measuring State of health, State of charge, or State of function of vehicle's battery.

Supertex Inc.    Sunnyvale, CA 94619
Nov 18, 2011 Supplied in SOIC-8 or -16 package, HV9801A drives LEDs and dims lamp brightness to one of 4 preset levels via light switch toggling. Average-mode current control method, which does not require any loop compensation or high side sensing, provides accurate response to input voltage fluctuations, delivers accuracy exceeding 97%, and provides line and load regulation of LED current. Delivering flicker-free operation, IC works with all existing light switches and does not require wall dimmer.