Schréder Lighting LLC    Elk Grove Village, IL 60007
Jan 19, 2012 Housed in die cast aluminum with completely sealed, IP66-rated optical compartment, Piano Luminaires features Thermix® thermal management design, which maintains 70% of initial luminous flux for minimum of 100,000 hr. Piano 1 uses 56 LEDs to deliver 5,405 lumens with efficacy of 86 lumens/W, while Piano 2 features 112 LEDs that produce 10,810 lumens with efficacy of 86 lumens/W. Both utilize LensoFlex® photometric engine for wide range of photometric distributions.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Jan 19, 2012 Featuring plated steel case, painted steel cover, and plastic set point window, Series DFS protects coils in air handler systems by preventing frost build up. DPDT manual or automatic reset relays sense lowest temperature along any 1 ft section of capillary, signal building management system, and cut off fan. Utilizing visual set point indicator and set point screw, set points can be adjusted as low as 34°F. Mounting clips are included for installation.

Larson Electronics, LLC    Kemp, TX 75143
Jan 19, 2012 Supplied in Class 1 Division 2 approved package featuring nylon body with rubberized coating and articulating head, waterproof RUL-9 employs Xenon bulb and reflector design capable of producing 120,000 candlepower and 1,102 Lux at 25 ft. Light beam can reach 600+ ft, and operation is controlled via booted, 3-way pushbutton switch that allows operation of main beam and 2 rear mounted LEDs independently or in tandem. Light can operate for 5 hr on one charge of its lithium-ion batteries.

Larson Electronics, LLC    Kemp, TX 75143
Jan 19, 2012 Combining functionality of flashlight and hanging trouble light, Magnalight HL-LED960 can be operated in spotlight or floodlight mode and lets operators illuminate work spaces up to 25 x 25 ft for 6 hr on one charge of its Li-ion battery. Light produces 360 lm and will run for 24 hr on full charge in spotlight mode and ~960 lm for 6 hr in floodlight mode. While 3-way switch lets operators toggle between beam modes, included steel hanging hook can be used to hang unit above work areas.

Laser Devices, Inc.    Monterey, CA 93940
Jan 19, 2012 Featuring less than 200 lm high intensity white light LED in addition to Class 1, Eye-Safe IR LED illuminator, OV-3 attaches to any MIL-STD-1913 rail. Variable lens adjustment from 7.5° to 15°, combined with 450 mW of IR illumination, provides eye-safe means of illuminating distances up to 200 m. Other features include 8 Hz strobe mode for tactical light and dual tailcap that provides operators with choice of pushbutton or remote cable pressure pad switch activation with double tap feature.

Pass & Seymour/Legrand    Syracuse, NY 13221
Jan 19, 2012 Comprised of switches, dimmers, tamper-resistant receptacles, and tamper-resistant GFCI receptacles, P&S Titanium Devices upgrade and enhance kitchens and bathrooms. Products have smooth titanium coating and corrosion-resistant surface suited for high-impact areas. Compatible with all 17 colors from On-Q Studio Collection, products feature finish that withstands continuous everyday use. Receptacles also have tamper-resistant shutter system that prevents insertion of foreign objects.

Banner Engineering Corp.    Minneapolis, MN 55441
Jan 19, 2012 Available in 1.1 in. width and various lengths from 5.7-44.4 in., Model WLS28 provides more than 50,000 hr of continuous operation. Unit comes in 6 colors with standard or pushbutton on/off and clear or diffused plastic windows. Operating on 12-30 Vdc, strip is also offered in sealed IP67/IP69K or unsealed IP50 versions. Several mounting options and bracket styles are available, including zinc-plated 14-gage steel swivel mounting brackets that allow 45° pivoting in either direction.

Acuity Brands Lighting    Conyers, GA 30012
Jan 19, 2012 Available in T5 and T8 lengths, Z Series distributes light down and outward, eliminating shadows between fixtures and scalloped patterns on walls. Units come with 0-10 V dimming to 10% and are certified for dry and damp locations ranging from -4 to 86°F. Available in white, galvanized, matte black, and smoke gray finishes, Z Series may be surface mounted or suspended with chain, aircraft cable, or stem in commercial, retail, manufacturing, warehouse, cove, and display applications.

Acuity Brands Lighting    Conyers, GA 30012
Jan 19, 2012 Offering 1-for-1 replacement of HID and fluorescent fixtures, PROTEON(TM) LED High Bay is suited for indoor spaces with mounting heights from 15-40 ft and ambient temperatures from -4 to 131°F. Unit features semi-diffuse lens to minimize glare and aluminum extruded heat sink for thermal management. Providing focus, narrow, wide, and spread distributions, luminaire meets both horizontal and vertical light level requirements determined by Illuminating Engineering Society.

Yokowo America Corp.    San Diego, CA 92131
Jan 19, 2012 Offered in 4-blade model, 2-piece battery connectors allow horizontal and vertical blade insertion. To ensure constant connection, receptacle side features dual beam contact in both insertion directions. Two tabs are uniquely fitted on receptacle to provide secure grip around blade upon insertion. Biaxial torsion and floating function absorb battery gap and reduce risk of intermittent power outages. Each blade, which consists of 4 contacts with 2.5 mm pitch, can handle currents up to 2 A.

Balluff, Inc.    Florence, KY 41042-0937
Jan 18, 2012 Providing auxiliary DC power for industrial networks, IP67 Intelligent Power Supplies include Heartbeat(TM) technology, which allows maintenance crews to get feedback on real-time and long-term status of supply and be able to predict replacement and maintenance cycle. Machine mount units are vibration and shock resistant with minimum service life of 15 years and greater than 93% efficiency.

4B Components, Ltd.    East Peoria, IL 61611
Jan 18, 2012 Speedmaster(TM) device tests calibration of speed switches and their alarm and shutdown underspeed relays. Input mode provides user with machine's actual running speed, and output mode allows user to test speed switch at set underspeed trip points for real time verification of monitoring system. Designed for testing in bucket elevators and conveyors, sensor remains in place on machine shaft during testing and no system connections need to be changed to use Speedmaster.

C&K Components    Newton, MA 02458
Jan 18, 2012 Featuring redundant double break contacts, RoHS-compliant and IP65-sealed PWR Series delivers tactile feel with quiet detent and allows single-step processing of SMD boards. Momentary SPST switches are resistant to vibration and have 100,000 mechanical cycle operating life. Operating from -40 to +85°C, series accommodates 20-250 Vac range and 10 mA to 2 A range with max contact resistance of 100 mohm. Nominal operating force is 7 N, and operating travel is 1.0 mm.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Jan 18, 2012 Featuring dual independent inputs, Series bq2416x allows operation from USB port or higher power input supply such as AC adapter or wireless power input. Integrated FETs support charge rates up to 2.5 A from IN input and 1.5 A from USB input. With 20 V input and 10.5 V over voltage protection, single-cell Li-Ion battery chargers support unregulated adapters and poor USB sources. Integrated power path allows system startup from deeply discharged or no battery power conditions.

Phoenix Contact    Harrisburg, PA 17111 0100
Jan 18, 2012 Compact versions of PC 5 connectors enable installers to wire currents up to 41 A UL and conductors up to 8 AWG in space-restricted areas, fostering compact equipment design. All connectors are plug-compatible to existing PC 5 and PC 4 headers and panel-mount plug connectors. Compact versions are offered with or without screw flange or with tool-free, click-and-lock latching system in 2-12 positions.

Newport Electronics, Inc.    Santa Ana, CA 92704
Jan 17, 2012 Available for analog voltage and current, temperature from digital sensors and dual thermocouples, humidity, and barometric pressure, wSeries has weatherproof, polycarbonate NEMA4/IP65 housing and battery or ac power options. Users can view charts and graphs as well as monitor and record readings over Ethernet network or Internet from any computer, tablet, or smart phone via Web browser. Also, alarms can be set and to notify individuals/groups via email or text messages.

Crydom    San Diego, CA 92154
Jan 16, 2012 Offering breakdown voltage and noise immunity greater than 1,600 V, Series H1 is suited for applications where electrical transients are common. Panel-mount units feature AC output to 90 A at 660 Vac, control voltage of 4-32 Vdc, and 4,000 Vac optical isolation. Available in Zero Voltage or Random Turn-On versions, RoHS-compliant relays offer optional LED input status indicator and installed thermal pad. Accessories include touch safe cover and heat sinks rated from 5.0-0.5°C/W.

NK Technologies    Campbell, CA 95008
Jan 13, 2012 DT Series combines hall effect sensor and signal conditioner into one package for use in DC current applications up to 1,200 A. Available in factory calibrated ranges that facilitate operation while also eliminating zero and span pots, large aperture current transducers offer 4-20 mA, 0-5 Vdc, or 0-10 Vdc outputs that are magnetically isolated from input for maximum safety. While internal power regulation delivers reliable operation, DIN-rail mount enclosure facilitates installation.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Jan 13, 2012 Capable of charging at 10 W, LXWS Series generates limited heat in wireless power transmission area and effectively suppresses noise. Wireless charging is accomplished through use of capacitive coupling, which replaces coils with transmitter and receiver simple electrodes. Integrating removal and error detection to ensure optimal system operation, LXWS Series enables charging systems for tablet PCs, mobile devices, music players, and other consumer electronics.

TYLT    Simivalley, CA 93065
Jan 12, 2012 Available in Micro-USB and Apple 30-pin connectors, TYLT Band is designed with flat silicon rubber cable that will not tangle with other cables or keep center console from closing. Two foot length ensures phone can rest in cup holder or other convenient location while charging. With 2.1 A output, device ensures Rapid Charging of dual devices.