Murata Power Solutions, Inc.
Mansfield, MA 02048
Jul 15, 2008 Housed in 19.5 x 7.5 x 10.0 mm SIP package, NMG Series includes eight 2 W models with input voltages of 5 or 12 V and choice of 5, 9, 12, and 15 V output voltages. Units offer typical efficiency ratings up to 88% and isolation voltage of 1 kVdc. Fully encapsulated, UL94V-0 rated design has SMD internal construction that uses toroidal magnetic technology. Compliant with RoHS, converters feature full-load operating temperature of -40 to +85°C.

Linear Technology Corp.
Milpitas, CA 95035-7417
Jul 15, 2008 Operating from input voltages up to 28 V, Model LTC4009 supports Li-Ion/Polymer, NiMH, NiCd, and sealed lead acid battery chemistries in multi-cell configurations. Synchronously rectified, buck switching topology drives all n-channel MOSFETs and enables efficiencies as high as 90% at 4 A. Final float voltage accuracy is specified at ±0.5% and charge current is programmable with accuracy of ±4%. Housed in 4 x 4 mm QFN-20 package, IC features operating frequency of 550 kHz.

Astrodyne Corp.
Taunton, MA 02780
Jul 15, 2008 Designed to meet power and EMC noise performance requirements in instrumentation, control, and telecommunication systems, ECA30 series is comprised of 22 models that provide output power of 30 W with single, dual, or triple outputs from 5-48 Vdc. Each encapsulated power supply measures 3.5 x 2.5 x 0.98 in. and accepts universal input from 90-264 Vac. Other features include internal input filtering as well as overvoltage and short circuit protection circuitry.

E-Switch Inc.
Brooklyn Park, MN 55428 1514
Jul 15, 2008 Model TL3315 surface mount tactile switch has electrical life of 200,000-1,000,000 cycles depending on operating force. Unit features 100, 160, and 250 gf operating force, contact rating of 50 mA at 15 Vdc, contact resistance of 200 mW max (initial), insulation resistance of 50 MW (min at 100 Vdc), and dielectric strength of 250 Vac rms. With -20 to +70°C operating temperature range, switch suits consumer electronics, audio/visual, and medical applications.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Jul 14, 2008 Suited for applications where output is regulated current, TPS40211 drives high-power LEDs when input voltage is less than voltage to turn on LEDs. LED driver features 4.5-52 V wide-input voltage, programmable closed soft start, over current protection with automatic retry, and programmable oscillator frequency. Designed for boost, flyback, SEPIC and LED driver topologies, it has fixed frequency current mode control that offers improved transient response and simplified loop compensation.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Jul 14, 2008 With 16-bit (65,536 steps) grayscale control with spectrum PWM, TLC5943 16-channel, 50 mA constant-current sink LED driver improves image quality and reduces flicker noise in monochrome, multicolor, and full-color LED displays, as well as LED signboards and display backlighting. It features 7-bit (128 steps) global brightness control for all channels with sink current, 30 MHz data transfer rate, 3.0-5.5 V VCC, and ±1.5% channel-to-channel and ±3% device-to-device constant current accuracy.

International Rectifier Corp.
El Segundo, CA 90245
Jul 14, 2008 Available in 8-lead SOIC, IRS260xD Series power MOSFET and IGBT drivers are designed for sinusoidal and trapezoidal motor control. Model IRS2607D high- and low-side driver features outputs in phase with inputs. With 540 nsec internal dead-time, IRS2608D half-bridge driver offers high-side output in phase with HIN input and low-side output out of phase with LIN input, while IRS2609D features high-side output in phase with IN input and shut down input to turn off both channels.

Agilent Technologies, Inc.
Palo Alto, CA 94303
Jul 14, 2008 Suited for electronics manufacturing applications, U8000 Series includes single-output, non-programmable DC power supplies with integrated overvoltage and overcurrent protection features that prevent damage to device under test. Users can save and recall up to 3 memory states during test setup, and security features such as keypad lock and physical lock prevent errors and damage. Series includes U8001A model (90 W) rated at 0-30 V, 3 A and U8002A model (150 W) rated at 0-30 V, 5 A.

Omega Engineering, Inc.
Stamford, CT 06907
Jul 14, 2008 Comprised of 80% nickel and 20% chromium alloy with surface finish that facilitates handling, NCRR series exhibits uniformity of resistance and mechanical stability. It operates in temperatures to 1,400°F and comes in thicknesses from 0.0015-0.0063 in. and widths from 1/64-3/16 in.

ON Semiconductor, LLC
Phoenix, AZ 85008
Jul 11, 2008 Capable of clamping input ESD waveform of 15 kV to less than 7 V in matter of nanoseconds, Models ESD7L5.0D and NUP4212 protect ESD sensitive ICs. Offered in 1.2 x 1.2 x 0.5 mm SOT-723 package, ESD7L5.0D protects 2 high speed data lines at 0.5 pF capacitance/line as well as D+ and D- lines of USB2.0 port. Available in 1.6 x 1.6 x 0.5 mm UDFN-6 package, NUP4212 protects 4 high speed data lines at 0.7 pF/line and 2 Vcc power lines as well as D+, D-, and Vcc line on 2 USB ports.

Richelieu Hardware Ltd.
Saint Laurent, QC H4S1V4
Jul 11, 2008 Enabling users to retrofit their halogen MR16 30 W fixtures, LED MR16 3 W Series suits applications such as retail and architectural lighting in showrooms and exhibits. Offered in cool and warm white, Series comes in 2 models, one that projects direct light beam at 30º, and second which projects wider beam at 45°. Featuring optical grade PMMA clear lens, molded aluminum with silvery anodized finish housing, and GU5.3 base (MR16), units provide low heat without UV or IR light radiation.

Ericsson Microelectronics
  Sweden
Jul 11, 2008 Housed in eighth brick sized package, Model PKB4302NG features input voltage of 38-55 V and comes in through hole and baseplate variations. Fixed ratio, intermediate bus converter offers efficiency rating of 97% at 48 Vin from 50-100% load. Designed to meet insulation requirements of EN60950, unit includes remote on/off, over-temperature protection, output over-current and over-voltage protection, as well as input under-voltage protection.

Grupo Premo
Barcelona   Spain
Jul 11, 2008 Featuring power management of 1.7-5 kW in 3.3 cm height profile and occupying less than 100 cm², PREMO planar transformer meets AEC Q-200 standard. Developed under vacuum potting technique that allows for 10 kV isolation, it can be used in dc/dc converters and traction inverters in hybrid vehicles. Unit is available in shell shaped aluminum heat sink which enables isotropic heat transfer, and has rated losses below 1% of total output power.

Honeywell International, Inc.
Morristown, NJ 07960-4648
Jul 11, 2008 Featuring heavy-braided 100% foil shield with 25% overlap to reject EMI and RFI noise, Crystal Series subwoofer cables maximize low-frequency audio performance of subwoofers for music and home theater systems. Ensuring full bass performance, units incorporate second 95% tinned copper braid shield along with 24K gold-plated RCA connectors for signal transfer and corrosion resistance. Tinned copper conductors are 20 AWG and insulated in foam PE.

STMicroelectronics
GENEVA   Switzerland
Jul 10, 2008 From 2.42 x 1.92 x 0.65 mm flip-chip package, EMIF06-AUD01F2 implements complete EMI filtering and ESD protection for stereo headset output and external/internal microphones. Audible handset demodulation noise is eliminated by achieving -25 dB attenuation throughout stop-band 800-2,480 MHz using high-density 1.3 nF PZT capacitors on microphone lines. ESD protection is achieved via combination integrated TVS diodes, low-inductance packaging, and Z-R-Z pi-filter topology.

Eaton Corp.
Cleveland, OH 44114
Jul 10, 2008 Utilizing Hot Sync® technology, Powerware 9395 is 825 kVA UPS that features scalable architecture adaptable to changing power requirements. It is designed to be field upgradeable, with ability to add additional modules to achieve N+1 redundancy or to provide additional capacity. Wireless paralleling technology enables each UPS to operate autonomously without need for centralized controllers or complicated, failure-prone control wiring.

STMicroelectronics
GENEVA   Switzerland
Jul 10, 2008 With 0.85 pF maximum capacitance at 240 MHz, Model USBULC6-2M6 minimizes distortion and helps designers meet 10 pF maximum specified line loading for operation up to 480 Mbps. Protecting high-speed USB, including Vbus, it meets IEC61000-4-2 level 4 specifications to 15 kV air-gap discharge as well as 8 kV contact discharge, and has breakdown voltage of 6.1 V. Device features low maximum leakage current of 0.5 µA to reduce power consumption and preserve battery life.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.
Maple Grove, MN 55369
Jul 10, 2008 Available with positions ranging from 2-12, KJ Series DIP Switch has electrical ratings of 25 mA at 24 Vdc for switch and 100 mA at 24 Vdc for carry. Featuring electrical life of 2,000 typical with contact resistance of less than 25 mW initial, unit has actuation force of 600 gF max, actuator travel of 0.90 mm, dielectric strength of 500 Vrms min with insulation resistance of greater than 100 MW min, extended actuator height of 0.6 mm, and operating/storage temperature of -40 to 85°C.

Phihong USA
Fremont, CA 94539
Jul 10, 2008 Available in single +12 and +24 Vdc output, Model PSAM30R is 30 W universal 2-wire input adapter that features less than 100 µA leakage current and no load power draw of less than 0.5 W at 115 Vac and less than 0.75 W at 230 Vac. It measures 3.94 x 2.48 x 1.41 in., weighs 7.05 oz, and is equipped with over-voltage, over-current, and short circuit protection. Unit is suited for applications such as portable dental and medical equipment, patient hoists, and dental curing equipment.

Phihong USA
Fremont, CA 94539
Jul 10, 2008 Including 1, 2, 3, and 5 W single output voltage models, PLA Series of unregulated switching adapters meet U.S. Energy Independence and Security Act as well as Level IV efficiency. They feature double insulation, short circuit protection with auto recovery, no-load power consumption of less than 0.3 W, and zero minimum load. With input voltage range of 90-264 Vac, units suit applications such as wireless communications, cordless headsets, Bluetooth device chargers, and cell phones.