Acuity Brands Lighting, Inc.    New York, NY 10001
Feb 09, 2012 Replacing 100-400 W metal halide luminaires, D-Series Size 1 LED Luminaire features modular design to facilitate maintenance and light engine upgrades. Unit is available with dimming capabilities and ROAM® wireless monitoring and control compatibility. Finished in zinc-infused powder coat paint that resists corrosion and weathering, luminaire produces zero uplight, consistent with LEED® and Green Globes® criteria. Applications include parking lots, plazas, campuses, and streetscapes.

Banner Engineering Corp.    Minneapolis, MN 55441
Feb 08, 2012 Rotating and strobing models of EZ-LIGHT® K50 Beacon are viewable from all directions and designed for areas with high ambient light, including outdoor environments. While both models offer solid ON function, rotating models offer 2 rotating speeds. Similarly, strobe models offer single/double strobe function in addition to also emitting light from top. Other features include 12-30 Vdc operation as well as cabled or quick disconnect options.

TDK-Lambda Americas Inc.    San Diego, CA 92154
Feb 08, 2012 Supplied in 4.1 x 8.6 x 1.6 in. package, GWS500 series includes AC/DC, forced air-cooled power supplies with nominal outputs of 5, 7.5, 12, 24, 36, and 48 V that achieve up to 90% efficiency. Output is user-adjustable, via built-in adjustment potentiometer or by injecting external programming voltage, to accommodate non-standard system voltages. Where peak power is needed, 24 and 36 V models can deliver up to 600 W for 10 sec. No-load standby power consumption is less than 0.5 W.

Larson Electronics, LLC    Kemp, TX 75143
Feb 08, 2012 LEDP5W-12LT is portable, rechargeable LED light tower producing 5,556 lumens from single IP 67 rated 60 W LED light head, which contains twelve 5 W LEDs and is adjustable through 270° of vertical movement. Light can be recharged from 115 Vac or 12 Vdc power sources and features onboard 33 Ah AGM sealed-lead acid battery. Constructed of extruded aluminum, it is designed for operators in construction, utility and first responder applications.

Larson Electronics, LLC    Kemp, TX 75143
Feb 08, 2012 Constructed with corrosion-resistant aluminum pedestal base, Model HAL-PM-1X150LED-100 features 150 W LED lamp assembly that produces 14,790 lumens and will illuminate 18,000 ft² of workspace. Lamp is housed within aluminum fixture with hinged and heat-/impact-resistant tempered glass door. Supplied with 100 ft of SOOW cord featuring explosion proof plug, portable light is rated Class 1, Div 2, Groups C and D, and approved for wet areas and marine environments.

ERICSSON INC.    PLANO, TX 75024
Feb 08, 2012 FRIDA II platform offers output voltage across entire 36-75 Vdc operational range with accuracies of 2%. Embedded firmware integrates response-loop algorithm which adjusts parameters to guarantee output voltage will be contained within this narrow band-gap. Digital-power Advanced Bus Converter platform is used with board-mounted DC/DC power modules for telecom and datacom applications. FRIDA II's integrated transformer and feedback components meet 2,250 Vdc isolation requirements.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Feb 08, 2012 Offered in 6-pin SOT-23 package and 6-pin LLP package with exposed pad, LM5114 drives Gallium-Nitride (GaN) power field-effect transistors (FET) and MOSFETs. Independent source and sink outputs from 5 V supply for optimal rise and fall times promote efficiency, while +4 to +12.6 V single power supply range supports range of applications. Other features include 0.23 ohm open-drain, pull-down, sink output; 7.6/1.3 A peak sink/source driver current; and 12 nsec typ propagation delay.

Amphenol Industrial Operations    Sidney, NY 13838
Feb 08, 2012 Intended for commercial- and utility-scale systems, active trunk and drop cabling solution is comprised of one major cable conductor with smaller cables connected to PV panel. Alternative to conventional DC wiring replaces typical trunk wiring design with pre-fabricated wire harness assembly, allowing for up to 40% more modules per string while reducing current requirements. Paired with ModLink junction box, solution also maximizes output of each module and recovers degradation losses.

Thomas Research Products    Elmhurst, IL 60126
Feb 07, 2012 Available in leading edge (incandescent) and trailing edge (ELV) versions, LED20W series is comprised of constant current dimmable drivers designed for LED dimming control from 100%-10%. Standard 14, 16.8, and 20 W models, featuring 100-277 Vac input and 7-40 V output, come in IP66-rated Black Magic Thermal Advantage(TM) plastic enclosures. Intended for OEM luminaires, products are designed for indoor and outdoor, general and architectural lighting applications.

Absopulse Electronics, Ltd.    Carp, ON K0A1L0  Canada
Feb 07, 2012 Supplied 7 x 7 x 12 in., chassis-mount enclosure, BAP 1K-U7712 Series does not require any fans or forced air cooling. Each model contains 2 internal modules, each capable of generating 500 W min for inherent redundancy. Products may be connected in parallel, and version with 2 independent, fully regulated outputs of 500 W each is also possible. Inputs range from 48-250 Vdc, regulated outputs range from 24-125 Vdc, and efficiency, depending on I/O configuration, is 85% (min).

Mill-Max Mfg. Corp.    Oyster Bay, NY 11771
Feb 07, 2012 Available in 14 sizes/styles with precision-machined brass housing, OFP® Solder Barrier Receptacles are discrete sockets for through-hole soldering into printed circuit boards. Organic fibre plugs prevent solder, paste, or flux from contaminating internal contact during placing and soldering process. When device/mating lead is plugged into receptacle, OFP® is knocked out, allowing mating lead to pass through fingers of internal contact and make reliable electrical connection.

Specialized Products Company    Southlake, TX 76092
Feb 07, 2012 Available in Cat5, Cat5e, and Cat6 versions, TrueConect RJ-Type Modular Plug Connectors feature factory-polished contacts with 50 µm gold plating, making them suited for high-speed data transmissions. Units have 3 offset insulation displacement points, as well as primary and secondary strain relief design that doubles cable holding strength of terminated connector. Housed in thermoplastic, plugs allow for visual verification of wiring configurations.

CW Industries    Southampton, PA 18966
Feb 07, 2012 Rated at 5 A/contact, CCM-20, 21, 22, and 23 Series design allows optimized solder flow and for post solder visual inspection. Pin counts of 38, 50, 88, 108, and 132 are available with standard pin length of .250 ±0.025. Made of glass-filled polyester with beryllium copper alloy contacts that are gold-plated in mating area, high density connectors are suited for advanced missile systems, torpedoes, flight guidance systems, and other military electronics equipment.

TE Connectivity Ltd.    Berwyn, PA 19312
Feb 07, 2012 Manufactured with advanced plating technique that puts precious metals only where needed, KOAXXA RF Interconnects have selective tin plating in solder region to promote soldering, and selective gold in contact region that helps meet industry standards. SMA units include panel mount; PCB straight and right-angle board mounts; and cable plugs and jackets with variety of flexible, semi-rigid, and conformable cable types.

VPT, Inc.    Blacksburg, VA 24063
Feb 06, 2012 With input voltage of 15-50 V per MIL-STD-704, 15 Watt DVAB Series delivers dual outputs of ±5, ±12, and ±15 V. Device offers tightly controlled line and load regulation errors through use of 2 independent control loops. Measuring 1.130 x 1.460 in., converter operates from -55 to +125°C with low output noise of 10-25 mVp-p typical. Unit includes fault tolerant magnetic feedback circuit as well as undervoltage lockout, indefinite short circuit protection, and current limit protections.

CUI, Inc.    Beaverton, OR 97005
Feb 06, 2012 With respective footprints of 2.00 x 1.00 in. and 2.10 x 1.12 in., VSKM-S5 (5 W) and VSKM-S10 (10 W) series are comprised of AC/DC power supplies that come in encapsulated package with pins for direct PCB mounting. Each has UL/cUL 60601-1 safety certifications, EN55011 class B EMI compliance, and nominal leakage current of 100 µA at 230 Vac input. Operating from 85-264 Vac universal input, power supplies come in output voltages of 3.3, 5, 9, 12, 15, and 24 Vdc.

Aven, Inc.    Ann Arbor, MI 48108
Feb 06, 2012 Made of carbon steel with 63-65 Rockwell hardness, Stealth Cutters come in 2 sizes with flush or semi-flush edges and black anodized finish that minimizes glare. Semi-flush models have edge bevel that produces small pinch on tip of snipped wire. Standard size has 9.5 mm head width and 8.4 mm blade length, while larger version has 25% bigger oval head and cutting area. Measuring 120 mm long with 16° angled head, cutters feature ESD-safe cushion grips to avoid electronics damage.

Electro Standards Laboratories    Cranston, RI 02921 3403
Feb 06, 2012 Supplied in anodized black box package that provides EMI/RFI shielding, Model 8449 allows device connected to Common port to access devices connected to A and B ports and simultaneously switches all 5 channels via front-panel rotary switch. Multi-Interface Switch features 2 channels with RJ45 connectors certified for Cat5e compliance and 3 channels that utilize BNC Coaxial connectors. Along with remote monitoring support, sealed switch features self-wiping, low-impedance contacts.

Rectorseal Corporation    Houston, TX 77055
Feb 06, 2012 Used for A/C system condensate drain diagnostics, Safe-T-Switch® SS103E and SS500EP feature electronic probe sensors and onboard LED display. Horizontal, vertical, inline, and clip-on installation options are available for SS103E, which is designed for primary drain line and auxiliary drain pan or auxiliary drain outlet and auxiliary drain pan of A/C systems. UL-2043 plenum-rated SS500EP offers compact water shutoff device for commercial down-flow rooftop units.

Electro Standards Laboratories    Cranston, RI 02921 3403
Feb 06, 2012 Supporting wavelength of 850 nm with insertion loss less than 1.0 dB, QuickSwitch® Model 6197 has front panel pushbutton for local control and ASCII RS232 serial data for remote control operation. Internal circuitry ensures isolation between networks/devices, while MEMS-based mirror/prism switch technology supports Gigabit data rates. Housed in rackmount package measuring 19.0 x 1.75 x 8.0 in., Model 6197 retains last switch position in event of power loss and continues to pass data.