Para Systems, Inc.    Carrollton, TX 75007
Nov 06, 2009 Incorporating solid-state surge protection technology with response time of 2-5 ns, Minuteman LineGuard(TM) Suppressors protect analog and digital surveillance cameras, DVRs, and network peripherals, including devices using Power over Ethernet. Units clamp surge to ground and automatically reset after low-voltage surge occurs. If catastrophic surge such as lightning does hit data line, LineGuard products provide fail-safe protection.

Tripp Lite    Chicago, IL 60609
Nov 06, 2009 Available in 2 horizontal and 5 vertical models, Monitored Power Distribution Units provide RJ45 Ethernet interface for remote monitoring and remote condition reporting of power and environmental conditions via SNMP, Web, or telnet. Digital meter locally displays connected equipment load in amps. Providing up to 24 outlets, PDUs assure optimal power distribution in IT applications and prevent downtime by enabling automatic load threshold notification.

Sauer-Danfoss    Ames, IA 50010
Nov 06, 2009 Integrating OSP steering technology and electrohydraulic steering valve, OSPE improves vehicle performance and comfort while facilitating compliance with Machinery Directive 2006/42/EC and simplifying hydraulic system architecture. Safe State feature can isolate electrohydraulic section of steering valve to protect steering system. Other features include selectable reactive and non-reactive steering modes, Load Sensing and Open Center options, and variable steering ratio.

Mid-West Instrument    Sterling Heights, MI 48314
Nov 06, 2009 Certified to CSA, UL, and ATEX standards, 220/240 differential indicating switches feature aluminum or 316/316L construction; weather-resistant, 4½ in. gage front; and ½ in. FNPT Cable or conduit entry. Model 220-Piston Style switch, rated for working pressures to 4,000 psi, comes in 0-5 to 0-100 psid ranges. Featuring total separation between high and low side, Model 240-Diaphragm Style switch has 1,500 psi working pressure rating and comes in ranges from 0-20 in. H20 to 0-100 psid.

AutomationDirect.com    Cumming, GA 30040-9905
Nov 06, 2009 Available in 6 lengths from 0.3-10 m, Patch Cables have right-angle M12 female plug with LED indicator on one end and axial male connector on other end. Polyurethane jacket enables use in oily and direct sunlight applications. Offered in 2, 5, and 10 m lengths, Quick Disconnect Cables include LED indicator to confirm signal presence. They have M12 right-angle female plugs and can be used with patch cables to extend distance.

FDK America, Inc.    San Jose, CA 95134
Nov 06, 2009 Offered in 0.394 x 0.220 x 0.472 in. SIP package, FPDK12TR8006PSV converter operates from 5.6-14 Vdc input and provides regulated programmable output voltage from 0.8-6.6 Vdc. It delivers up to 6 A of output current at power density exceeding 950 W/cu.-in. Single input converter does not required external Vcc (bias) supply for operation. RoHS compliant product features remote ON/OFF, over-current and over-temperature protection, and start up into pre-biased output.

Murrelektronik, Inc.    Duluth, GA 30096
Nov 06, 2009 Murrelektronik Suppressors help protect PLC outputs in fieldbus sytems from premature failure. They are available in wide range of casing types with several mounting options to allow fitting to motor terminal boxes, control cabinets, DIN rails, and underside of contactors. EMC complaint installation allows plants to achieve noise free, failure free operation.

Tripp Lite    Chicago, IL 60609
Nov 06, 2009 Model SMART2200RM2U provides 2,200 VA/1,920 W capacity and has 8 outlets with 3 separately breakered, individually controllable load banks to support remote reboot or automated load shedding. USB and DB9 communication ports, optional SNMP Web card, plus PowerAlert Software offer complete monitoring, reporting and logging of all site and UPS operational conditions. Advanced line-interactive AVR protects from brownouts/overvoltages without switching to battery power.

ON Semiconductor, LLC    Phoenix, AZ 85008
Nov 06, 2009 Ultra-low capacitance NP-MC series protect sensitive electronic equipment from transient overvoltage conditions. Available with full range of industry-standard voltage levels, Pb-free series is designed for use with DSLAM, FTTx, Ethernet, POE, and VoIP systems. Packed in 2.6 x 4.3 mm SMB package, products provide protection with minimal signal distortion in high-speed xDSL, T1/E1 and other broadband data transmission equipment and comply with various industry regulations.

Burton Medical Products Corp.    Chatsworth, CA 91311
Nov 06, 2009 Engineered for extended life and conservative energy usage, AIM LED light uses 21, 20,000 hr-rated LEDs in 3 modules to provide 45,000 lx illumination at 1 m while requiring 84 W of power. CRI is 92, color temperature is 4,300°K, and Y-shaped design minimizes obstruction of light into surgical field while providing adjustable light pattern without casting shadows. Also, 360° limitless arm-and-mounting-system rotation provides 63 in. max reach and 10 ft dia.

Maxim Integrated Products    Sunnyvale, CA 94086
Nov 05, 2009 Supplied in 2 x 2 x 0.7 mm CSP, MAX8884Y/MAX8884Z have dual 300 mA LDOs and individual logic on/off controls for each output. On-board, hysteretic, PWM-controlled step-down converter provides 2 switching-frequency options, letting designers optimize for efficiency (2 MHz) or solution size (4 MHz). Features such as individual enables for step-down converter and 2 LDO outputs as well as pin-selectable output voltages for step-down converter and one LDO further extend flexibility.

EAO Switch Corp.    Milford, CT 06460
Nov 05, 2009 Used in aggressive environments such as ticketing machines, vending machines, and access control panels, R Series offers flush mounting and stainless steel construction that lend to vandal resistance and cleanability. Design meets IP65 standards and has rated mechanical service life of 1,000,000 operations. Available in 16 and 19 mm varieties, pushbuttons feature round actuator with momentary switching action. LED illumination (halo ring or central dot) is offered for 19 mm versions.

Phihong USA    Fremont, CA 94539
Nov 05, 2009 Available in 5 and 9 Vdc outputs, PSC12x Series consists of A, E, K, S, and C fixed plug versions for use in US, Europe, UK, Australia/New Zealand, and China, respectively. Units are double insulated, meet Class B EMI standards, and feature short-circuit protection with auto-restart, as well as over-current and over-voltage protection. Per ENERGY STAR Level V efficiency standards, all models feature power draw of less than 0.3 W at no-load.

Philips Lighting Co.    Somerset, NJ 08875
Nov 05, 2009 Optanium® T8 programmed start parallel electronic ballasts, designed to maximize energy savings, enable independent lamp operation, which allows exact identification of expired lamps. Hot restrike feature allows users to replace lamps without cycling power, while striation reduction feature minimizes chance of striation issues when used with standard/energy-saving lamps. They are available with .88 balast factor and meet NEMA/CEE energy efficiency requirements.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Nov 05, 2009 Providing full-load performance across -40 to +85°C temperature range, MER1 Series isolated 1 W single-output DC/DC converters are available in 5 input voltages ranging from 5-48 V and output voltages of 5, 9, 12, or 15 V. Typical efficiency levels are up to 89%, while galvanic isolation of 1 kVdc helps minimize switching noise. Fully encapsulated 0.774 x 0.242 x 0.4 in. units utilize UL 94V-0 package materials and are RoHS-compliant.

Powerex, Inc.    Youngwood, PA 15697
Nov 05, 2009 Models VLA312-2425 and VLA313-2450 step-down DC-DC converters feature capacity of 25 or 50 W, respectively, and provide 2,500 Vrms electrical isolation between input and output. Input voltage range is 475-850 Vdc. Featuring overcurrent and overvoltage protection, units are intended for use on board preregulator for industrial control equipment.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Nov 05, 2009 Featuring compact Lexan 943 housing, Series DSSR includes internal heat sink, bistable clips for DIN rail or panel mounting, and LED indicator light. Unit provides reliable switching in applications where inrush currents can affect mechanical state relay operation. Operating from 24-480 Vac, relay features max voltage loss of 1.6 Vac, max output leakage current of 10 mA, and temperature limits of -22 to 176°F.

PCT International Inc.    Gilbert, AZ 85233
Nov 05, 2009 Battery Testing and Charging System helps cable system operators test, re-charge, and redeploy batteries from EMTA deployments. Comprised of servers, testing software, and tester/charger, system can be stacked to service up to 192 batteries in one 19 in. rack. It provides complete testing and battery charging linearity test for 2-, 3- and 4-cell battery packs. System can also plot minute by minute charging reports; provide current and voltage curves; and test power drain linearity.

NexTek, Inc.    Westford, MA 01886
Nov 04, 2009 Built to IP68 standards, SurgeGuard(TM) K-Series protects RF transmission lines rated up to 50,000 W with surge capability to 125,000 A. It addresses demands of mission-critical RF applications, including HF, VHF, and UHF frequency ranges from 0 (DC) to 1,000 MHz. Based on multiple gas discharge tube design with serviceable replacement elements, arrestor measures 119 x 45 mm, has 7-16 female to 7-16 female connectors, and delivers 50 kW max RF power at max through-current of 30 A.

Linear Technology Corp.    Milpitas, CA 95035
Nov 04, 2009 Featuring programmable average input current limit, Model LTC3606B delivers up to 800 mA of continuous output current with efficiencies up to 96%. Using constant frequency and current mode architecture, unit operates from input voltage of 2.5-5.5 V, making it suited for single-cell Li-Ion and USB applications. Device can generate output voltages from 0.6-5 V and uses switching frequency of 2.25 MHz. Housed in 3 x 3 mm DFN-8 package, synchronous buck regulator operates from -40 to 125°C.