DigiTec    Newell, WV 26050
Sep 23, 2010 Rugged ARM Series microprocessor-based controllers evenly distribute runtime by automatically alternating lead and lag loads between 2 pump sequences. Devices include inrush delay to prevent both loads from energizing simultaneously, and five UL913 intrinsically safe low-voltage/-current control switch inputs. Integral device logic allows outputs to function if one input fails to open or close, while hand-off-automatic switches enable manual operation if needed.

ON Semiconductor, LLC    Phoenix, AZ 85008
Sep 23, 2010 Supplied in 3 x 3 x 0.8 mm package, CAT3661 single-channel Quad-Mode(TM) LED Driver supports 2.0-5.5 V inputs, can drive one LED backlight with up to 5 mA current, and achieves 92% peak efficiency. Soft-start current limiting and short-circuit protection enable use in equipment powered by coin cell batteries, while low-noise input ripple and constant switching frequency allow use of small external ceramic capacitors. Applications include ULP LED backlighting in portable medical equipment.

Belden    Richmond, IN 47375
Sep 23, 2010 Enabling terminations in less than 5 sec without termination tools, FiberExpress Brilliance Field-Installable Connectors feature built-in activator that performs fiber splicing and crimping action. Units support high-speed optical fiber networks including 10G Ethernet as well as future 40G/100G networks. Able to withstand temperatures from -40 to +75°C, connectors can serve as backbone, horizontal, or fiber-to-the-desk components in any commercial building, government agency, or data center.

Corvus Energy    SURREY, BC V4A1T6
Sep 23, 2010 Able to store and distribute energy in megawatt sizes, safe and modular lithium-ion battery pack delivers capacities needed to provide sustained power in hybrid and full-electric vessels/vehicles. Design, built around NMC-based Dow Kokam cell and proprietary battery management system, promotes battery efficiency and performance with energy storage capacity from 6.2 kWh to unlimited sizes. Battery's cells are 99% efficient, and construction withstands harsh ocean/port environments.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Sep 23, 2010 Achieving 96% efficiency, Model TPS62120 generates 75 mA output current from input voltage of 2-15 V. Unit supports energy harvesting and battery-powered applications, as well as 9 and 12 V line-powered systems. In power save mode, synchronous converter reaches 75% efficiency at loads down to 100 µA. IC operates in pulse frequency modulation mode during light load operation, consuming 11 µA of quiescent current. With 1.2-5.5 V output, device enables power generation for range of microcontrollers.

Zettler Magnetics, Inc.    Aliso Viejo, CA 92656
Sep 22, 2010 Featuring compact, rugged, and fire-resistant package, switch mode power modules are suited for converting utility ac voltage into regulated dc voltage, which is required for computers, networking equipment, and other electronics. Units are available in 5 and 10 W models.

W.A.C. Lighting Company    Port Washington, NY 11050
Sep 22, 2010 Available in 2, 3, and 4 in. apertures, LEDme(TM) Recessed Downlights provide light output equivalent to 50 W halogen lamp. Two inch models are IC-rated with 40° vertical tilt and 350° horizontal rotation. Units distribute light at 24° beam angle and can be dimmed from 100 to 15% using electronic dimmer. Offered in both IC and Non-IC rated models, 3 and 4 in. models can be dimmed from 100 to 1% using incandescent or electronic dimmer. All are suited for new construction and retrofit applications.

Aven, Inc.    Ann Arbor, MI 48108
Sep 22, 2010 Producing adjustable illumination for any specimen or application, MC90/50 consists of 6 W, plug-in ring light with 40 mm inner ring, 70 mm outer ring, and 50-160 mm working distance. All electronics are part of self-contained design, and light intensity, which exceeds 70,000 lux, can be controlled continuously and without step controls. Four zone control buttons regulate illumination by quadrants, and dimmer assures uniformity and stability at any setting.

Linear Technology Corp.    Milpitas, CA 95035
Sep 22, 2010 Supplied in 15 x 15 x 4.32 mm LGA package, LTM4627 DC/DC uModule® regulator can convert inputs from 4.5-20 V to outputs from 0.6-5 V, regulating output with ±1.5% total DC output error max. IC incorporates onboard inductors, MOSFETs, and supporting components in addition to onboard differential remote sense amplifier, output voltage tracking, and soft-start features. Functional from -40 to +125°C, multiple LTM4627 devices can be paralleled for current sharing up to 60 A.

Mid-West Instrument    Sterling Heights, MI 48314
Sep 22, 2010 Certified to CSA, UL, and ATEX standards, 220/240 explosionproof, differential indicating switches are constructed of 316-316L aluminum and have weather resistant, 4 ½ in. gauge front as well as ½ in. FNPT cable or conduit entry. Piston-style 220 and diaphragm-style 240 offer respective working pressures to 4,000 and 1,500 psi, as well as ranges from 0-5 to 0-100 psid and 0-20 in. H20 to 0-100 psid. Model 240 also offers total separation between high and low side.

Larson Electronics, LLC    Kemp, TX 75143
Sep 22, 2010 Featuring UL 844 Class 1 and Class 2 ratings for hazardous locations, Model EPL-48-4L-LED is available for pendant or surface mount use, while Model EPLC-48-4L-LED is configured on cart with 4 casters, protective wire guard, switch, and cord. Both 96 W models are also certified for use as powder spray booth lights and will operate on any voltage worldwide, including 220 V, 50 Hz.

Keithley Instruments, Inc.    Cleveland, OH 44139 1891
Sep 21, 2010 Featuring digital control platform, 6-slot Model 707B and single-slot Model 708B use front panel interface for configuration management and switch pattern programming. Panel also displays programmable row and column names, crosspoint status, and status messages. Mainframes can store hundreds of switching configurations and channel patterns in non-volatile memory. Using Test Script Processor, test scripts can be executed within instrument, optimizing speed of connect-source-measure sequences.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Sep 21, 2010 Industrial foot switches are offered in KG thermoplastic and KR metal versions that can be ordered with or without pedal protection cover. Also, version with safety lever is offered, as are one-pedal and two-pedal versions. Other features include pedal actuator lock, two-stage safety lever, and two-pedal with left pedal free actuation and right pedal with safety lever. In addition, wide variety of contact arrangements are available.

Mid-West Instrument    Sterling Heights, MI 48314
Sep 21, 2010 CSA, UL, and ATEX certified, explosion-proof Models 220/240 are made of lightweight aluminum with weather-resistant 4½ in. gauge front. Piston-style Model 220 features working pressure of 4,000 psi and ranges from 0-5 to 0-100 psid, while diaphragm-style Model 240 provides working pressure of 1,500 psi and ranges from 0-20 in. H₂O to 0-100 psid. Both IP65-rated indicating switches include over range protection and ½ in. FNPT cable or conduit entry.

Clore Automotive    Lenexa, KS 66215
Sep 21, 2010 Featuring SOLAR Sonic Compression technology, 2,000 Watt Model PI20000X utilizes modified sine wave design to provide clean power from 12 V power source to wide variety of power equipment, electronics, and appliances. Unit features three 110 Vac outlets and integrated mounting plate for fixed mounting on horizontal or vertical surfaces. Temperature-activated fan control eliminates unnecessary draining of 12 V power source when in standby mode.

Bridgeport Fittings, Inc.    Stratford, CT 06497
Sep 21, 2010 Designed to help contractors connect EMT conduit, Mighty-Seal(TM) Push-EMT(TM) fittings are ready to use directly out of the box and reduce installation time to seconds. Design facilitates and accelerates installation by only requiring contractors to push fitting onto prepared conduit (½ in. min) and attach fitting to box. Removable and reusable, cULus-Listed fittings make secure, concrete- and rain-tight seal. They exceed design requirements of UL 514B and National Electrical Code.

mophie    Paw Paw, MI 49079
Sep 21, 2010 Delivering up to 2.1 A of charging output with 3,600 mAh capacity, juice pack powerstation provides portable power to Apple devices - iPad, iPhone, iPod - as well as other USB devices. Battery cell automatically switches between desired mAh charge, including 500 mAh, 1 A, and 2.1 A, while stand-by toggle switch ensures there is no drainage when not in use. Also offering pass-through USB charging, portable quick charge external battery has 6-light LED battery status indicator.

Linear Technology Corp.    Milpitas, CA 95035
Sep 21, 2010 Housed in 15 x 15 mm LGA package, 15 A uModule® LTM4627 converts input supplies ranging from 4.5-20 V to output voltages from 0.6-5 V, regulating output with ±1.5% total DC output error. Multiple units can be paralleled for current sharing up to 60 A. PLL function permits users to synchronize device to clock frequency from 250-780 kHz. Operating from -40 to 125°C, regulator is suited for telecom servers, networking and industrial equipment, medical imaging systems, and avionics equipment.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Sep 20, 2010 Supplied in 5 x 5 mm, 32-pin LLP, dual-channel and dual-phase LM5119 features emulated current-mode control and enables regulation of single or dual high-current voltages directly from 5.5-65 V inputs. Functionality enables direct regulation of 2 output voltages from one input, and dual outputs can also be connected in parallel to power loads up to 40 A with interleaved switching. Operating frequency is user-programmable from 50-750 kHz and can be synchronized to external clock signal.

Laird Technologies    Chesterfield, MO 63017
Sep 20, 2010 Designed to resist solder joint fracture, Board-Level Shield comes in single-piece, 2-piece, and multi-compartmental models. Elimination of drawn flange minimizes space needed on PCB for shielding trace width by potentially ~0.3 mm. Partially drawn corner is located near top portion of shield, resulting in torsional rigidity with no drawn lip and no draft. For parts over 2 mm, corner is both drawn and formed with interlocking multi-radius corner, providing optimum EMI shielding.