Larson Electronics, LLC    Kemp, TX 75143
Jul 25, 2011 Featuring IP68-rated design waterproof to 3 m, Magnalight LEDPB10W-240X2E LED Light Bar resists destructive effects of salt water and elements. Dual rows comprised of 12 CREE XLamp MC-E® LEDs each produce 20,640 lm while drawing 20 A at 240 W from 12 V electrical system. Capable of operating with voltages from 9-46 Vdc, light bar is available in 20° spot and 40° flood configurations. Other features include active heat management as well as dimming, strobing, and flashing support.

Larson Electronics, LLC    Kemp, TX 75143
Jul 25, 2011 Drawing less than 1 A at 10 W from 12 V electrical system, Magnalight LEDP10W-1R LED produces 860 lumens of light. Unit measures 2 in. in diameter, uses PWM circuitry to control heat, and can be mounted in tight spaces. Constructed with aluminum body, stainless steel mounting hardware, and unbreakable LEXAN lens, emitter is IP68-rated and waterproof to 3 m, resisting damaging and corrosive effects of marine environment. It can produce 260 ft long beam in spotlight configuration.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Jul 22, 2011 Offered as standalone device, bq77910 offers protection and cell-balancing for 4- to 10-cell Li-Ion and lithium iron phosphate battery packs. IC monitors individual cell voltages and drives 2 N-channel power MOSFETs to interrupt current flow during fault conditions. Criteria for fault detection and recovery is fully programmable in non-volatile memory. Product simplifies battery pack designs for e-bikes, e-scooters, portable gardening tools, power tools, and UPS.

XP Power    Sunnyvale, CA 94085
Jul 22, 2011 Accommodating input range of 10-40 Vdc, 35 W Series MTC35 and 50 W Series MTC50 can handle transients up to 50 Vdc for up to 100 msec. Single-output COTS modules are available with +3.3, +5, +12, +15, or +28 Vdc output and can be adjusted between -20% and +10% via external trim pin. With baseplate cooling, encapsulated board-mounted modules operate in temperatures from -40 to +100°C. Control and signal pins offer ability to inhibit output and provide thermal warning and converter shutdown.

Del City    Menomonee Falls, WI 53051
Jul 22, 2011 Featuring 6 LEDs, LED Pocket Light Stick produces floodlight effect and directional illumination pattern. Its 36 lm output can be sustained for up to 11 hr, and water-resistant housing features molded plastic clip for attaching to pocket. With 30 floodlight style LEDs and wide angle LED technology, LED Rechargeable Work Light produces 140 lm and is manufactured from rugged ABS material. It incorporates grip with lens guard, and NiMh battery pack can run up to 10 hr per charge.

austriamicrosystems AG    Schloss Premstaetten A 8141  Austria
Jul 22, 2011 Available in 0.5 mm pitch QFN and 0.8 mm pitch LQFP packages, 16-channel AS3820 and 12-channel AS3821 offer ±0.2% channel-to-channel accuracy for optimal light uniformity and picture quality. ICs can be used for driving external power MOSFETs or, due to base current error compensation, low beta bipolar transistors. Products are programmable via SPI port and provide built-in safety features, including thermal shutdown and open and short LED detection.

Anderson Power Products    Sterling, MA 01564
Jul 22, 2011 With power handling capacity from 75-260 A, SPEC Pak(TM) High Power Connector has IP68-rated shell. Housing design and materials create weatherproof enclosure to protect electrical components from water, dust, and other harsh environmental contaminants. Featuring UL94 V-0 flammability rating and UL 746C F1 weatherability rating, connector is compatible with industry-standard PG threaded sealing glands and has aluminum latches with lockout/tag-out capability.

LEVITON    Melville, NY 11747
Jul 22, 2011 Designed to meet or exceed UL and NEC requirements, SmartlockPro® Slim Duplex GFCI features pair of LED lights that automatically respond to ambient light, getting brighter when light levels in room are low. SmartlockPro Reset Lockout Technology prevents resetting of device if GFCI cannot respond to ground fault. In addition to signaling correct or incorrect wiring during installation, dual purpose LED indicator functions as confirmation that protected power is available during typical use.

Shihlin Electric & Engineering Corporation    Pasadena, CA 91101
Jul 21, 2011 Featuring output frequency up to 1,000 Hz, SE2-series adopts high-efficiency speed sensorless vector control technology to enhance overload capacity to 200% (1 sec) as well as reduce inverter tripping potential. Built-in EMC filters effectively reduce electromagnetic disturbance and promote conformance to standard specifications of EN61800-3. Series can also be safely implemented in impact load applications and is suitable for high-speed motor applications.

Thomas & Betts Corp.    Memphis, TN 38125
Jul 21, 2011 Featuring balanced, ergonomic, in-line design, T&B® 6-Ton Battery-Powered Crimping Tool can be operated with one hand while yielding 6 tons of output force. This 6.4 lb tool is suited for crimping service entry connectors and lugs as well as splicing up to 300 kcmil copper or 4/0 AWG aluminum wire. Tool head includes fixed 5/8 in. BG and D crimp grooves as well as O-die insert and is compatible with all W-style dies. Jaws automatically return to open position after completing crimp.

Emerson Network Power    St. Louis, MO 63136
Jul 21, 2011 Featuring universal 100-240 Vac input for worldwide use, DCH5 Series generates regulated 5 Vdc output capable of delivering up to 1 A continuously. Adapters operate in constant voltage/constant current mode and are intended for powering or charging any USB peripheral device rated at 5 W or less such as smartphones, tablets, and digital cameras. Available in 4 models for US, Europe, UK, and Australia, adapters employ switch-mode power conversion technology and meet Energy Star Efficiency Level V.

Kopp Glass, Inc.    Pittsburgh, PA 15218
Jul 21, 2011 Available in variety of colors to meet aviation chromaticity requirements, Heated Glass Lens features transparent conductive oxide coating on interior surface that provides electrically conductive surface on electrically resistive lens. Metallic electrodes and leads are attached to deliver electrical field that powers heating application. Preventing snow and ice accumulation on lens, resulting thermal radiation meets arctic testing requirements outlined in FAA Engineering Brief No. 67C.

Federal-Mogul Corp.    Southfield, MI 48034
Jul 20, 2011 To help protect occupants of electric and hybrid electric vehicles if crash occurs, CrushShield(TM) encases wire harness so that battery cable remains isolated from conducting structure. Rugged, multi-layer fabric, combined with unique substrate design, absorbs and disperses energy. Product meets requirements of U.S. Federal Motor Vehicle Safety Standard regulations (FMVSS 305) and helps manufacturers meet new regulations without requiring electrical component or wiring redesign.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Jul 20, 2011 Comprised of mercury-free microswitch in waterproof casing made of polypropylene, CE-approved Series FSW2 self counter weighted floating switch is designed for automation of pumps - specifically filling and draining of tanks, wells, and reservoirs. Polypropylene body consists of double airtight chamber with high-pressure melted polypropylene re-injection sealing, and cable hangers are available to suit various mounting applications.

LEVITON    Melville, NY 11747
Jul 20, 2011 Evr-Green(TM) 120 Level 1 Portable Charger can be plugged into any standard 15 or 20 A, 125 V grounded receptacle, while Evr-Green 160 Level 2 Home Charging Station provides up to 16 A at 240 Vac (3.8 kW output) and comes in plug-in and hardwired versions. Both chargers comply with all industry standards, including NEC®. Assembled in U.S., they have been developed to meet automotive quality, product development, and testing requirements and work with all major automakers' vehicles.

CyboEnergy    Rancho Cordova, CA 95670
Jul 19, 2011 Featuring 4 DC input channels, CyboInverter can connect to as many as 4 solar panels using standard connectors and performs Maximum Power Point Tracking (MPPT) for each connected panel. Ability to connect to panels with different sizes or brands, oriented in different directions or angles, promotes installation flexibility, and multiple CyboInverters can daisy chain with AC cables connecting to power grid.

Raritan Computer, Inc.    Somerset, NJ 08873
Jul 19, 2011 With built-in intelligence, PX-2000 Series provides real-time monitoring of data center energy and loads. Intelligent power distribution units deliver outlet-level switching to shut down and turn on IT equipment remotely. To enable data center operators to view power activity, real-time information can be seen on iPDU's LED at rack and remotely on browser-based user interface. Models are available for 120 V, 208 V, 3-phase 208 V, 3-phase 400 V, 16 A and less, 20 A, and 30 A.

Renusol America    Atlanta, GA 30363
Jul 19, 2011 Made of high molecular weight polyethylene, Renusol CS60 is designed for flat roof applications and requires no roof penetration with addition of ballast. Unit evenly spreads point load weight across roof surface, and only one CS60 is needed for every PV module. Renusol VS, intended for pitched roofs, includes pre-assembled clamps, fastener-free splice connectors, and slide-free L-feet. One-size-fits-all mounting solution has height adjustable end clamps and snap-in-place mid clamps.

Tigo Energy Americas    Los Gatos, CA 95032
Jul 19, 2011 Certified for use in all major solar markets, Tigo Energy Module Maximizer(TM) ES75 lets owners of PV projects of any size increase power production by reducing effects of shade, dust, clouds, and uneven temperature on system performance. Architecture enables management of up to 350 W of power per solar module, and efficiency of 99.5% provides optimal performance without dissipating extra heat near solar module. It harvests most energy possible from mono-crystalline modules producing 320+ W.

UNIVERSAL ELECTRIC CORP    Canonsburg, PA 15317
Jul 19, 2011 Designed to meet power distribution needs of data centers and critical facilities, STARLINE B800 Track Busway is available in customizable lengths up to 10 ft and offers flexibility via 2 style options: Copper (all copper conductors) and Composite Aluminum (continuous copper contact surfaces with aluminum busbar). Supplied in aluminum housing, system is rated 800 A, 600 V AC or DC and offered in continuous access or plug-in/shutter design.