United Electronic Industries    Canton, MA 02021
Jul 06, 2010 DNx-DIO-4x2 series electromechanical relay output boards feature 12 independent Form C (SPDT) relays, 125 Hz switching rates, and are suited for variety of switching and digital control applications. Designed for PowerDNA Cube and PowerDNR RACKtangle chassis, respectively, DNA-DIO-462 and DNR-DIO-462 feature Guardian Advantage functionality, which offers programmable overcurrent protection. Models DNA-DIO-452 and DNR-DIO-452 are offered without Guardian Advantage readback capabilities.

Deublin Company    Waukegan, IL 60085-6747
Jul 05, 2010 Designed to allow transmission of signals from stationary to rotating structure, Slip Rings can be configured for power and signal connections. Signal portion is compatible with Ethernet, Profinet, RS-232, RS-485, RS-422, and CAN as well as analog or digital sensing and 24 V control signals. Rings are suited for electromechanical systems that require unrestrained, intermittent or continuous rotation while transmitting power and/or data, such as wind turbines, robotics, and industrial machinery.

Linear Technology Corp.    Milpitas, CA 95035
Jul 05, 2010 Operating within 3.6-37 V VIN range, H-Grade Model LT3686H features overvoltage lockout, protecting regulator and load from transients up to 55 V, making IC suited for load dump and cold-crank conditions. Internal 1.85 A switch delivers up to 1.2 A of continuous output current at voltages as low as 0.8 V, and switching frequency is user-programmable from 300 kHz to 2.5 MHz. Housed in 3 x 3 mm DFN-10 package, device maintains constant frequency switching, even in very light load conditions.

Microsoft Corp.    Redmond, WA 98052-6399
Jul 05, 2010 InstaLoad battery installation technology allows users to install battery without regard to positive and negative polarity. Device works regardless if battery is installed positive-side-up or positive-side-down and can be incorporated into devices that require frequent battery swap-outs. It is compatible with CR123, AA, AAA, C, or D size batteries or similar barrel-type form factors and can be designed into most battery compartments.

RF Micro Devices, Inc.    Greensboro, NC 27409-9421
Jul 05, 2010 Supplied in 3.0 x 3.0 mm QFN package, RF3482 front end module (FEM) integrates WiFi power amplifier with SP3T switch for 2.4-2.5 GHz ISM band applications. Integration of complete switch functionality enables routing of WiFi and Bluetooth® receive/transmit signals to 2 SoC transceivers. Additionally, SP3T switch can act as splitter to transmit or receive Bluetooth and WLAN signals simultaneously. Other features include Rx balun and 2,170 MHz filtering and harmonic attenuation.

Cissoid    Mont Saint Guibert 1435  Belgium
Jul 02, 2010 STROMBOLI(TM) scalable reference design and demonstration board can convert input voltages up to 400 V into multiple, symmetrical output voltages up to ±25 V. Galvanic isolation between input and outputs is at least 10 MW at 500 V. Available in 2 versions optimized for input voltages of 15-40 V or 150-350 V, device delivers 25 W with efficiencies up to 70% at 225°C. Magnetic feedback provides output voltage temperature stability and load regulation.

Vicor Corp.    Andover, MA 01810 5424
Jul 02, 2010 With input range of 9-36 V, Mini Series DC-DC Converters are appropriate for MIL-COTS and industrial applications operating from 12 or 24 V inputs, which are typical for battery systems in vehicles. Fully encapsulated 28 Vdc modules offer 8 different output voltages ranging from 3.3-48 V with max power of 150 W and 4 operating temperature grades, including -55°C. Baseplate options include slotted, threaded, and through-hole.

NKK Switches    Scottsdale, AZ 85260-3420
Jul 02, 2010 High electrical capacity SW3800 Series switches are rated at 30 A at 125 Vac, 30 A at 250 Vac, and 30 A at 30 Vdc for resistive loads; and up to 30 A at 125 Vac and 15 A at 250 Vac for inductive loads. Designed for panel mount applications, they feature steel mounting frame and screw terminals made of brass with nickel plating. Units operate in temperatures from -10 to +70°C and have mechanical life of 50,000 operations minimum. They are available DPST, DPDT, 3PST, and 3PDT configurations.

Control Technology Inc.    Oklahoma City, OK 73116
Jul 02, 2010 Specified over -40 to +70°C range, DC-UPS750A offers 28 V, fully isolated, 750 W DC output from 14 x 8.5 x 5.25 in. case. Unit also features dual DC inputs and can support an optional lightweight battery module. Offering full UI and control capabilities, bulkhead- or rack-mountable UPS operates from 22-36 V input and provides Ethernet, USB, and discrete interface capabilities. User programmable shutdown timing sequences and remote turn on/off capabilities are also standard.

Crydom    San Diego, CA 92154
Jul 02, 2010 Designed for general purpose/light duty use in heating, lighting, and motion control applications, CL series is rated at either 5 or 10 A output from 24-280 Vac, and includes LED input status indicator. It is offered in industry standard panel mount SSR package and is also available in either IP00 or IP20 touch safe screw terminal configurations. Featuring 4 kV all solid state optical isolation with Triac output, series comes with either zero voltage or random turn-on.

Linear Technology Corp.    Milpitas, CA 95035
Jul 02, 2010 As complete switch mode DC/DC µModule® POL regulator, LTM4611 integrates main DC/DC power circuit and gate drive circuit plus inductors, MOSFETs, input and output bypass capacitors, and compensation circuitry. IC can generate 5 V N-channel MOSFET gate drive for voltage conversion from 3.3 VIN or less to loads as low as 0.8 V at up to 15 A. Offering conversion efficiencies up to 92%, regulator supports paralleling of up to 4 units to share current and increase output capability.

austriamicrosystems AG    Premstatten   Austria
Jul 02, 2010 Designed for space-limited applications with low power consumption requirements, AS134x series constant-frequency dual buck converters are available with fixed-voltage versions in 100 mV increments from 1.2-3.6 V. Each version provides 2 independent DC-DC regulators with output currents between 0.5 and 1.2 A. Operating over broad input voltage range of 2.7-5.5 V, devices feature automatic power-save mode and internal MOSFETs. Applications include laptops, PDAs, and SSDs.

General Manufacturing, Inc.    Bluffton, IN 46714
Jul 01, 2010 Equipped with three 3 W LEDs, IS300(TM) Work Light is rated for use in Class 1, Div 1, Groups C and D areas. Unit can operate in beam mode for use as inspection light or flood mode for use as area task light. LEDs are rated at 50,000 hours and produce 5,000 K bright, white light. Operating for 7 hr straight on 4.8 V NiMH rechargeable battery pack, light includes red LED in handle that indicates low battery charge. Cut-off circuitry inside battery prevents damage from drawing charge down too far.

Power Sources Unlimited, Inc.    Wrentham, MA 02093-2210
Jul 01, 2010 Available with optional 0-10 V dimming control, RoHS compliant CC3512H Series power supplies with IP66 and NEMA4 waterproof design are suited for indoor and outdoor use. Convection cooled plastic-potted housing measures 2.05 x 1.38 x 0.9 in. and dual wire I/O simplifies installation. Other features include input voltage from 12-36 Vdc with constant current output of 350, 700, 1,000, 1,400, 1,750, and 2,000 mA, and operating temperature from -40 to +50ºC.

Chloride Systems    Burgaw, NC 28425
Jul 01, 2010 Certified to NSF Standard 2 Splash Zone, Max-Lite Series is UL listed for use in damp and wet locations in temperatures ranging from 0-40°C. Standard Intelli-Charge self-diagnostics continuously monitor all critical functions and optional self-testing feature meets monthly periodic testing requirements in NFPA 101 and IBC. Available in 6 or 12 V, 25-150 W units with tungsten or halogen lamp heads, series includes maintenance-free, sealed lead calcium or nickel cadmium batteries.

Richco, Inc.    Morton Grove, IL 60053
Jul 01, 2010 Flexible, serrated rubber strap model UMB provides tight grip to cables and features large, ribbed base that gives cables extra surface area while also providing strain relief. RoHS compliant cable clamp is available in adhesive and screw mounting styles.

XP Power    Sunnyvale, CA 94085
Jul 01, 2010 Offering efficiencies up to 94%, AEF and AFM series comply with various energy efficiency standards and have max no-load power consumption of less than 0.5 W. AEF series is comprised of 100, 120 and 150 W models with single output covering voltages of +12, +19, +24, or +48 Vdc; 150 W model also offers +36 Vdc output. Rated up to 120 W, AFM series provides +12, +15, +18, + 24, or +48 Vdc output.

GE Company, GE Lighting    Cleveland, OH 44112
Jun 30, 2010 Designed to replace fluorescent and halogen lighting in variety of applications, 12 Vdc Tetra® AL10 LED System offers color-rendering index of 93 and ANSI bin color temperature consistency of 2,700, 3,000, and 4,000 K. Fully dimmable, low-profile fixture uses remote driver and multiple modules that can be wired in series. Consuming 4.5 W/ft of energy, system contains no lead, mercury, or glass and is RoHS compliant. It is suited for under shelf, cove, accent, and task lighting applications.

K&H Industries, Inc.    Hamburg, NY 14075
Jun 30, 2010 Available in 15 or 20 A, single- or 3-phase versions, K&H PowerTuff Portable Outlet Boxes in feed-through/stringer models comply with OSHA and NEC regulations for safe, portable power. Industrial-grade units protect against electrical shock and are UL-listed. They feature heavy-duty rubber construction on exterior, cover plates made of durable Valox with integrated mounting holes, and strain relief system. Available in yellow or black, products can also include 12 or 10 AWG SOOW cord.

Tripp Lite    Chicago, IL 60609
Jun 30, 2010 Featuring dual input power cables that connect to UPS and directly to primary power source, Hot-Swap Power Distribution Units allow UPS systems to be removed, replaced, or repaired without powering down mission-critical connected load. They feature manual transfer switch with lighted status indicators, offer 2U installation in 2- or 4-post racks, and also support space-saving rear-post mounting. Five models are available in 10-30 A range.