Lascar Electronics, Inc.    Palo Alto, CA 94303-0727
Jun 24, 2004 Model PSU 130 provides output from 1.5–30 V at up to 1 A, which can be adjusted to within 0.1 V across entire range. Selected voltage and current drawn are displayed on large, backlit LCD. Over-voltage, over-current, and short-circuit protection prevent accidental damage to unit. Output terminals are 4 mm sockets on 19 mm pitch. Power supply can be angled or stacked to suit varying operating environments.

HellermannTyton    Milwaukee, WI 53224
Jun 24, 2004 SpeedyTie(TM) requires only one click to tie and untie. Once product is applied, tail can be tucked away for safety. Tie secures 2 bundles simultaneously by inserting tail through open slot then inserting it through red lever slot. Available in yellow nylon 6/6 or black UV-stabilized nylon 6/6, it maintains 200 lb tensile strength. Applications include packaging, heating and ventilation, and overhead installations.

W.A.C. Lighting Company    Port Washington, NY 11050
Jun 24, 2004 Series G811 QuickConnect Pendants feature colorful outer blown-glass that surrounds smaller, opal-etched inner glass shade. They are supported by 6 ft of braided cable, with plated die-cast brass fittings, and metal cordsets in platinum, chrome, and satin brass. Suspended from ceiling individually or in group, pendants use 12 V/24 V Xenon Bi-Pin lamp with maximum of 50 W. Colors include amethyst, clear, cobalt blue, gold, and turquoise.

Krohne, Inc.    Peabody, MA 01960-3803
Jun 23, 2004 Featuring tuning fork measuring system with piezoelectric elements, Series LS 5000 is unaffected by product variations in density, conductivity, dielectric constant, or viscosity. Switches are also insensitive to foam, air bubbles, turbulence, pressure and temperature variations, strong external vibrations, or varying products. With tuning fork length of 1½ in., they are suited for confined spaces such as pipelines with diameters as small as 1 in.

PHIHONG USA    Milpitas, CA 95035 5421
Jun 23, 2004 Compliant with IEEE802.3af standard, PSA-16U switching power supply offers detection, connection, disconnection, and fault protection. It allows power and data to be carried over one Ethernet cable and has 3 LEDs to indicate power, connection, and faults. AC input voltage range for single port injector is 90–264 Vac with voltage range from 100–240 Vac and AC input frequency from 47–63 Hz. Max output load current is 0.35 A, and O/P voltage is +48 Vdc. Total output power is 15.4 W.

MGE UPS Systems    Costa Mesa, CA 92626
Jun 23, 2004 Pulsar EX RT features hot-swappable batteries and form factor suited for use in free-standing tower or compact 2U rack configurations. Online double-conversion UPS topology with built-in automatic bypass enables addition of extended battery packs or fuel cell modules. Other features include 15 A NEMA input plug, 8 standard receptacles, as well as USB and serial ports for communication and power management. Powershare technology allows remote rebooting of systems.

KWALITY PHOTONICS PVT. LTD.    HYDERABAD 500 062  India
Jun 23, 2004 Super Flux LEDs operate at current levels of 170 ma to deliver brightness output of 25,000 mcd, and can also operate at lower current levels of 20 ma with brightness output of 3,000 mcd. LEDs can be used to simulate point light source for enhanced optical performance. They suit applications such as traffic control lights, automobile brake lights, outdoor signs, backlighting, and status indication for industrial controls and machinery.

Advance Transformer Co.    Rosemont, IL 60018 5625
Jun 22, 2004 Centium® Electronic Ballast for 4-Lamp T5/HO lamp applications is available in 16.7 in. housing with integral leads. IntelliVolt® multiple-voltage technology enables operation at any input voltage from 120–277 V, 50/60 Hz. Programmed-start ignition insure optimum lamp life in frequent switching applications. Ballast features 90°C case temperature rating, total harmonic distortion less than 10%, and hi-low switching option.

Pilz Automation Safety L.P.    Canton, MI 48187
Jun 22, 2004 Coding on non-contact PSENcode guarantees protection against manipulation and meets Category 4 of EN 954-1 standards. Five directions of actuation plus 17 mm switching distance ensure maximum flexibility for installation. Definite assignment of switch and its counterpart makes it impossible to manipulate safety gate being monitored. More than 10 safety switches can be connected in single series.

Eraser Company, Inc., The    Syracuse, NY 13221
Jun 22, 2004 Automatic, microprocessor-controlled Model WC500 feeds, cuts, and counts material to appropriate programmed length and number of pieces without material handling problems associated with limp or fine material. Cutter is suited for preparation of all types of wire, solder, sleeving, tubing, and small cables.

Kycon Inc.    San Jose, CA 95125
Jun 22, 2004 Series KMC-SATA supports SATA Generation I and II platforms for 150 MB/sec and 300 MB/sec operation, respectively. Assemblies are made with lead-free signal cables and two 7-pin, straight-to-straight or right-angle-to-straight connectors. Standard lengths include 300, 500, and 1,000 mm. Custom cable assemblies are available.

Meggitt (Maryland), Inc.    Germantown, MD 20876
Jun 22, 2004 MaxFlex(TM) cables, compatible with data collectors from SKF, Emerson, and Rockwell, have reinforced cable joint at sensor connector end and perform at temperatures to 120°C. Completely sealed to function in high-moisture environments, they withstand pull strength of over 100 lb. Products are offered 6, 10, and 16 ft lengths, coiled or straight, and can be terminated with MIL-style or BNC connector on sensor end, and DB25, Fischer, Lemo, or Bendix connector on other.

Datatronics    Romoland, CA 92585 8916
Jun 21, 2004 Rated at 20 A in 4.8 mm sq. package, surface-mount CT323 senses current output changes to provide feedback for overload detection, emergency shut-down functions, and power regulation. It has operating temperature range of –55 to +155°C and offers turns ratios from 1:20–1:200. Performing optimally at frequencies of 100 kHz and above, product is manufactured with UL94V0 compliant materials and supports communications and networking applications.

Square D Co.    Raleigh, NC 27611
Jun 21, 2004 Telemecanique® Phaseo® DC Power Supplies are regulated and switch-mode with adjustable outputs. Measuring 2¼ in. H x 2¾ in. W, single-phase units provide 100-240 Vac and 12 or 24 Vdc output. Available in 10, 20, and 40 A versions, 3-phase Model ABL7UPS accepts 420-520 Vac and outputs 24 Vdc. Model ABL7CEM measures 3 in. H x 1¾ in. W x 2¾ in. D, accepts 100-240 Vac, and outputs 24 Vdc. All power supplies include overload, short-circuit, overvoltage, and undervoltage protection.

Amerlux Lighting Solutions    Fairfield, NJ 07004-2527
Jun 21, 2004 Imperia T6 ceramic, metal-halide track luminaires utilize miniature electronic ballast technology. Imperia T6 Zoom Spot uses narrow reflector for beam spreads from 8–24° and wide reflector for beams from 25–55°. Textured reflector on Imperia T6 Wall Wash fixture provides even gradient of light for wall displays and graphics, spaced up to 8 in. oc. Made of die-cast aluminum, fixtures accommodate 39, 70, and 150 W lamps for retail, commercial, and architectural applications.

Moore Industries International, Inc.    North Hills, CA 91343
Jun 21, 2004 TMZ MODBUS Transmitter accepts direct signal from sensors and analog devices including RTD, thermocouple, ohms, mV, current, voltage, and potentiometer. Unit converts inputs to standard MODBUS RTU protocol ready for direct interface with MODBUS-based monitoring and control systems. Housed in rugged, metal, RFI resistant housing, TMZ is isolated and protected against effects of ground loops, plant noise and electromagnetic interference.

Honeywell Power Supplies    Northford, CT 06472
Jun 21, 2004 Security Power Supplies include HPL624 Linear Power Supply/Charger, which converts low-voltage ac into 6 or 12 Vdc @ 1.2 A, and HPS5 Switching Power Supply/Charger, which converts low-voltage ac into 6, 12, or 24 Vdc @ 4.0 A. Both have built-in battery chargers and onboard diagnostic LEDs for troubleshooting. Products provide multivoltage output and integrate overload protection. Mounting tape and battery leads are included. Applications include magnetic locks, heaters, blowers, and cameras.

Elma Electronic Inc.    Fremont, CA 94538
Jun 18, 2004 The B08 switch family features compact switches with SMD pins and reflow compatibility. Model C08 offers 9 x 9 mm platform and meets 6-Sigma quality standards. Products suit applications in hand-held devices such as 2-way radios, industrial and medical instruments, and video. Switches are available in Hex or Gray codes in both SMD and THT styles.

Taiyo Yuden (USA) Inc. / Power Systems Group    San Marcos, CA 92069
Jun 18, 2004 Suited for 1U-height, single-output applications, PAS250 uses passive PFC technology and meets all Class A PFC requirements. In operation, unit provides universal 115/230 Vac input selection and single 250 W continuous power output. User can select one of several factory-set output voltages, including 12, 24, and 48 V. Measuring 7.0 x 4.0 x 1.5 in., unit is protected against overload, overvoltage, reverse voltage, and thermal conditions.

Computer Conversions Corp.    East Northport, NY 11731
Jun 18, 2004 Solid State Synchro Control Transformers have standard accuracies of ±6, ±15 or ±30 minutes of arc. They simultaneously accept synchro or resolver inputs of 11.8 or 90 V, 400 Hz or 90 V, 60 Hz, and 14, 12, or 10 Bit binary digital data. Output voltage is sine of the difference between 2 input angles. Output angle range is ±7° or ±12.5°, and operating temperatures are 0–70°C or -55 to +85°C. Bi-directional input data is accepted and outputs are short-circuit protected.