One Stop Displays    Winter Park, FL 32789
Dec 01, 2004 PLED display uses Hitachi/Samsung-compatible standard interface and protocol introduced by LCD displays. Character font set closely matches ASCII computing standard, which can be generated by various system processors from character strings. Features include 160° viewing angle, 100:1 contrast ratio, and 12 mA current draw @ 40 nits of uniform brightness. Applications include telecom, instrumentation, home automation, and audio and video products.

One Stop Displays    Winter Park, FL 32789
Dec 01, 2004 With 1.65 mm thick display, 1.5 in. color OLED features 262 k color depth to produce clear images for picture IDs or other images relevant to maintaining security. It is suited for next-generation ID, security card, and programmable card applications.

Schleuniger, Inc.    Manchester, NH 03103
Dec 01, 2004 CoaxStrip 5300 can strip coaxial, triaxial, and multi-conductor cables as well as single conductor wires up to .275 in. OD. Maximum stripping length is 1.18 in. Machine includes menu guided programming, graphical user interface, and memory storage capacity of 1,000 programs.

Advance Transformer Co.    Rosemont, IL 60018 5625
Nov 30, 2004 SmartMate® Electronic Ballasts offer maximum rated case temperature of 90°C for use in applications involving two 42 W compact fluorescent lamps. Intellivolt® technology allows ballasts to operate at any input voltage from 120–277 V, 50/60 Hz. Units feature color-coded connectors, THD below 10%, end-of-lamp-life protection, and programmed start lamp ignition for extended lamp life in frequent switching applications.

J.W. Speaker Corporation    Germantown, WI 53022
Nov 30, 2004 Sealed against water and dust, Model 281 Rear Combination Lamp, Model 539 Strobe, and Model 770 Work Light resist shock, vibration, and corrosion. Model 281 functions as stop, turn, tail, and back-up light with respective colors of amber, red, and white. Model 539 features scratch-resistant acrylic lens and nylon housing, while Model 770 features impact-resistant polycarbonate lens and nylon housing. Latter provides focused, near-daylight illumination.

Pass & Seymour/Legrand    Syracuse, NY 13221
Nov 30, 2004 Extra Heavy-Duty Receptacles are designed without ferrous metal, which allows them to be used for high-magnetic-field environments, such as magnetic-resonance imaging suites. With maximum working voltage of 250 V, units are certified for current interrupting at full-rated current. Break-off, line-contact connecting tab facilitates split circuit wiring, while circuit labels on face of receptacles allow permanent and positive circuit identification.

ITT Industries    Newton, MA 02458
Nov 30, 2004 Designed for motors with flange size of 60 x 60 cm or less, vibration- and shock-resistant M3™ features IP67 sealing. Housing has one power and 3 feedback insulators separated by metal shielded walls, and 2 sealed entries are provided for power and feedback cables. Specifications include 48 V/5 A power rating, 50–630 V operating voltage, and 2–10 A current rating. Components include zinc die cast shell and Fluor rubber sealing parts.

Linear Technology Corp.    Milpitas, CA 95035
Nov 30, 2004 Model LTC4063 standalone single-cell Li-Ion linear battery charger also provides regulated output voltage for system supply. Integrated low dropout linear regulator delivers up to 100 mA and is adjustable from 1.2-4.2 V. Charger operates without microcontroller and delivers up to 1 A to battery from input voltage range of 4.3-8 V. Housed in 3 x 3 mm DFN package, charger has thermal regulation circuit for protection against overheating.

Phoenix Contact    Harrisburg, PA 17111 0100
Nov 26, 2004 MINI Power Supply provides 3.8 A output at 24 V and ensures proper safety compliance. Output currents are available with regulated and adjustable output voltage of 22.5–26 Vdc with constant capacity above 24 V. DIN-rail-mountable, Class 2 unit is fully enclosed and has integral diagnostic feedback via alarm output with LED indication. Pluggable, screw clamp terminal blocks facilitate wiring.

Electro Standards Laboratories    Cranston, RI 02921 3403
Nov 26, 2004 Category 5, Model 4421 connects workstation or device between 2 other devices or networks. A, B, and COMMON ports are RJ45. Front panel button changes switch position, eliminating need to plug and unplug patchcords. Switch includes RS232 serial security Supervisory Remote Port, where upon proper authentication, terminal or computer in terminal mode can communicate with unit, determine status, change switch position, and/or lockout front panel switching capability.

Linear Technology Corp.    Milpitas, CA 95035
Nov 26, 2004 Featuring input supply range of 5-25 V, Model LTC4441 provides peak output current of 6 A, which allows DC/DC controller to drive N-channel MOSFETs or multiple MOSFETs in parallel. Open-drain output with adjustable blanking prevents ringing when sensing source current of power MOSFETs. Propagation delay for driving 4.7 nF capacitance with 7.5 V drive voltage is 30 ns. Unit's design permits logic threshold driver input to be driven below ground or above driver supply.

Linear Technology Corp.    Milpitas, CA 95035
Nov 26, 2004 Current mode, fixed frequency, Model LT3479 operates from input voltage of 2.5-25 V, making it suitable for applications with input sources ranging from single cell Li-Ion to 20 V wall adapter. Both inputs of error amplifier are available, permitting use as boost converter or inverter. Switching frequency can be programmed, via single resistor, between 300 kHz and 3.5 MHz. Offering efficiencies up to 89%, step-up converter includes programmable soft start function.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Nov 24, 2004 Offering constant voltage and current, XMT® 350 VS features Auto-Lineâ„¢ primary power management technology and is suited for applications that require multiprocess inverter without remote control capabilities. It uses Tweco®-style connectors and includes 4-position process selector switch, adjustable dig and inductance control, Wind Tunnel Technologyâ„¢, and Fan-on-Demandâ„¢. At 400 A, electrical efficiency is 87.24%, and unit provides output voltage to 38 V.

Tyco Electronics/Raychem.    Menlo Park, CA 94025-1164
Nov 24, 2004 Available in industry standard 0402, 0603, and 1206 chip sizes, fast-acting fuses provide overcurrent protection on systems using dc power sources up to 125 Vac. They have clear time characteristics of 4 hours min at 100% of rated current, 5 seconds max at 250% of rated current, and 0.05 seconds max at 400% of rated current. Featuring monolithic, multilayer design, RoHS-compliant devices offer operating temperatures of -55 to +125°C.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Nov 24, 2004 FieldConnexâ„¢ provides multiple power supplies for fieldbus devices via digital data lines. It consists of motherboard with single or redundant plug-on modules, including isolated power module with 30 V and 500 mA, isolated FNICO power module with 17 V and 500 mA, and non-isolated module with host spur protection. System is installed on DIN-rails and integrates fieldbus segment connections, appropriate terminators, as well as host-specific system plug connectors.

Amphenol Corp., Amphenol Aerospace    Sidney, NY 13838
Nov 24, 2004 Tru-Lok series has molded thermoplastic main plug body and secondary latch with Viton main seals and wire seals. Suited for demanding environments, product incorporates 1.5 mm socket contacts featuring proprietary RADSOK contact system, which is based on hyperbolic grid configuration. Stamped grid and cylinder allow for multitudes of insertion cycles and off axis insertions. RADSOK sizes are No. 12, 8, 4, 0, 2/0, and 4/0 as well as 18 mm.

Eye Lighting International    Mentor, OH 44060
Nov 23, 2004 HID Lamp and Ballast Kits provides means to update HID lighting systems for energy-savings, replacement of failed lighting system components, or retrofit of one lighting system to another without fixture replacement. Each kit includes core and coil ballast with QUAD multiple input voltage connections rated for 120, 208, 240, and 277 V, or ballast rated for single input voltage of 480 V. Kits also provide capacitor, igniter, mounting brackets, fasteners, and lamp.

ERICO    Solon, OH 44139-2631
Nov 23, 2004 ERITECH® HAMMERLOCK joins grounding conductor to ground rod with one hammer strike. Machined from electrolytic copper, connection is conductive and withstands ground fault currents and lightning transients. Dual-hole version, available for No. 6 and No. 4 solid, is suited for pad-mounted transformer applications. Larger version of single-hole product permits 2/0 stranded to be joined to 5/8 in. and ¾ in. ground rods. Both withstand harsh underground environments.

FCI/Burndy Products    Manchester, NH 03108
Nov 23, 2004 Remote-operated, hydraulic LPHY46 KOMPRESSORâ„¢ features 2 in. jaw opening, 15 ton output force, and 350° head rotation that allows for operation in any position. Double acting for hydraulic ram advance and retract, product features ergonomic handle and spring back-up for ram retraction in case of hydraulic pressure loss. It can be powered from open or closed center hydraulic tool circuits or from portable, 1,500–2,500 psi hydraulic power packs.

BinMaster    Lincoln, NE 68507
Nov 22, 2004 Single rod, Series CVR-600 offers single point level detection in free flowing solids and dry products. When material covers rod of probe, vibration stops and electronic circuitry forces relay to switch. When blade gets uncovered, vibration will restart and relay will switch back. Sensing element is 3 in. long making switch suited for small hoppers or plugged chute detection.