Eubanks Engineering Co.    Monrovia, CA 91016
Feb 11, 2005 Utilizing pneumatic drive, Model 4040 can strip tough insulations, such as cross-linked polyethylene, Teflon®, nylon, and other wrapped or extruded insulations. Dual-port, 6-stage cutterhead provides up to 1,800 psi of force to cut through insulated copper up to 0.625 in. OD. Strip assemblies feature double-acting clamp cylinders that provide up to 400 psi of gripping force and can grip wire and cable ranging from 0.187-0.625 in. OD.

Harting KGaA      Germany
Feb 10, 2005 HARTING RJ Industrial® Metal Outlet continues premis cabling according to IEC 11801 directly into industrial environment. PROFInet® compliant outlet carries IP 67 rating and can be connected with LSA-PLUS® technology. Suited for use in harsh applications, product mounts on walls, pillars, or beams. Covered label enables clear identification of both ports. On field cabling side, HARTING RJ Industrial® Data 3A plug offers optimized RJ 45-based connection.

Zierick Manufacturing Corp.    Mount Kisco, NY 10549
Feb 10, 2005 Both 1263 SMT Box Receptacle (horizontal terminal) and 1265 SMT Box Receptacle (vertical terminal) have entry capability on either end and offer reliable connection via high-pressure contact area. Current rating is 3 A, and units mate with 0.025 in. square or round pin. Receptacles can accommodate minimum of 12 mating cycles without degradation. Designed for automation with existing pick and place equipment, units are also available in SMT tape pockets.

Wall Industries, Inc.    Exeter, NH 03833 4556
Feb 10, 2005 Suited for applications requiring nominal 12 or 24 Vin, LV series converters operate over -40 to +100ºC temperature range and feature 6-sided shielding, remote sense, trim to 10%, case ground pin, and remote on/off. Each unit produces up to 150 W and 20 A of output current at 3.3 and 5 Vout with efficiencies of up to 88%. Converters feature dc input of 10-30 Vin and can be configured to provide output voltages of 3.3, 5, 12, 15, 24, 26, and 28 Vout.

TE Connectivity Ltd.    Berwyn, PA 19312
Feb 10, 2005 Suited for PCB power I/O applications, BUCHANAN .325 in. centerline tri-barrier strips are molded from UL 94V-0 black thermoplastic in sizes from 2-8 contact positions. Each contact carries 15 A, 300 Vac/Vdc current rating. Standard SEMS screw accepts stranded or solid, bare copper wire from 22-14 AWG and can be fastened with Phillips or slotted screwdriver. Clear plastic, hinged safety cover allows terminal contact screw to be loosened and tightened through access hole.

LEDtronics, Inc.    Torrance, CA 90505
Feb 10, 2005 Series SLL003 Ultra Slim Shoebox LED Cluster Light Module comes 1.5 in. high fixture that weighs 14 lb. Unit features 400 incandescent white 5 mm LEDs mounted on PCB, consumes 20 W, emits 656 candela of light, gives off 700 lumens, and has color temperature of 3,000-3,500 K. Transparent lens is high-impact strength, UV-resistant polycarbonate and stainless steel housing features electrocoat-painted powder-coat finish to protect against corrosion.

Electro Industries/Gaugetech    Westbury, NY 11590
Feb 10, 2005 Multifunction LED Displays feature master/slave capability, allowing use of 3 multi-line LED displays configured to voltage, current, and power. With additional displays, users can obtain 9 LED values from one meter simultaneously. Used as master polling device and volts display, Model P40N broadcasts data to Amp Model P41N and Power Model P43. Technology allows Nexus Meter to have multiple display capability using 1 display port with non-scrolling metering parameters.

Vicor Corp.    Andover, MA 01810 5424
Feb 10, 2005 High-boost Model VI-HAM is a universal ac input, PFC front-end module optimized for use with Series 375 DC-DC converters up to 600 W. Consisting of full-wave rectifier and high-frequency, zero-current switching boost converter, unit includes active inrush current limiting, over temperature and short circuit protection, control, and housekeeping circuitry.

Wall Industries, Inc.    Exeter, NH 03833 4556
Feb 10, 2005 Series PSSBU150 universal input, open ac/dc power supplies provide single output voltage from 3–50 Vout. Housed in 3 x 5 in. package measuring 1.32 in. high, units operate up to +70°C with efficiencies as high as 86%. They include internal EMI filter, power factor correction, tight line/load regulation, plus over-voltage and over-current protection. Applications include CRT terminals, disc drive systems, microprocessor-based systems, and portable devices.

Brocade Communication Systems    San Jose, CA 95131
Feb 10, 2005 EMC® Connectrixâ„¢ DS-4100B SAN switch solution provides ports-on-demand scalability. Base 16-port configuration can be non-disruptively scaled to 24 and 32 ports. Based on SilkWorm 4100, switch features redundant and hot-swappable power supplies and fans, hot-swappable SFP media, hot code loading and activation, and extensive enterprise-level security. Each port is auto-sensing for data link speeds of 1, 2, or 4 Gbit/sec, offering full forward and backward compatibility.

C & D Technologies    Mansfield, MA 02048-1151
Feb 09, 2005 Available in packages with surface mount, open frame, PTH design, NFA Series DC-DC converters come in 10, 16, and 20 A models. Non-isolated Point-Of-Load converters, featuring efficiencies up to 95%, come in positive and negative enable logic models with monotonic start-up with pre-bias. With input voltage range of 6-14 V, products support 4:1, 5:1, and 6:1 intermediate bus converters. Series also has sequence feature for voltage turn-on/off tracking.

Advance Transformer Co.    Rosemont, IL 60018 5625
Feb 09, 2005 Available to run 1–4 T8 fluorescent lamps, Optanium™ Instant Start Electronic Ballasts are offered in 2 versions: standard light output design with .87 ballast factor, and low-watt design with .77 ballast factor. Lamps are operated at 42–52 kHz frequency, eliminating visible flicker. Additional features include anti-striation circuitry, lamp auto-restrike capability, 20-foot remote mounting capability, and independent lamp operation.

W.A.C. Lighting Company    Port Washington, NY 11050
Feb 09, 2005 Available for IC and non-IC applications, Spec Grade 3 and 4 in. Recessed Downlights are crafted of die-cast aluminum. These 12 V recessed luminaires, offered in variety of 3 and 4 in. apertures, feature decorative, adjustable, and wet locations trims. Decorative glass trims are available in cobalt blue, amber and white, and finishes include brushed nickel, black, white, and polished brass.

Belden    Richmond, IN 47375
Feb 09, 2005 Brilliance Analog Audio cables, offered with either single-pair (9451P) or Siamese (9451DP) construction, incorporate twisted pairs with 22 AWG tinned copper conductors and FEP insulation. Conductors are color-coded and 22 AWG drain wire is inside foil shield. Beldfoil bonded-foil shield is bonded to cable jacket and can be stripped for termination in single step, while Flamarrest jacket is flexible and easy to pull. Both cables are NEC and CEC CMP rated.

Emerson Process Management / Rosemount Div.    Chanhassen, MN 55317
Feb 09, 2005 Oxymitter(TM) can provide oxygen measurements during annealing of cold rolled metal products. By receiving accurate measurements, operators are able to maintain necessary preset oxygen levels to avoid oxidation. With transmitter inserted directly into furnace, there is no sampling system to maintain. Offering accuracy of ±0.05%, Oxymitter includes signal-conditioning electronics and HART® protocol, which allows remote calibrations and diagnostics.

Measurement Computing Corp.    Norton, MA 02766
Feb 09, 2005 Model USB-ERB24 offers 24 channels of Form C relay with 6 A output ratings, while Model USB-ERB08 offers identical performance in 8-channel configuration. Both feature all-aluminum chassis suitable for benchtop or DIN rail. All wiring is brought out to full-sized screw terminals that are protected by latching connection cover. Each module provides built-in USB hub, implements daisy-chain power supply interconnection, and includes data logging software.

Supertex Inc.    Sunnyvale, CA 94619
Feb 09, 2005 Integrated, 2-channel, 5-level driver IC, MD1711, generates 5-level waveform for CW, PW, and color Doppler images. It features ±2.0 A source and sink peak current, up to 20 MHz output frequency, and 2 separate gate drive voltages. Also available, MD1210 dual MOSFET driver IC drives N- and P-channel MOSFETs. It features symmetrical 6 ns rise and fall time with 1,000 pF load. Output can swing below ground, and low-jitter design generates good Doppler measurements.

Foster Transformer Co.    Cincinnati, OH 45223 2571
Feb 08, 2005 Transformer provides standard square wave output that requires less filtering than linear transformers for dc applications. Low component count provides reliability under extreme operating conditions. Transformer suits use in battery chargers, medical equipment, inverter and UPS systems, line voltage stabilizers, industrial automation and machine tools. Models are available for 50 Hz, 60 Hz, and 50/60 Hz, with output ratings from 50 VA to 5.0 kVA.

Phihong USA    Fremont, CA 94539
Feb 08, 2005 Available in 8, 16, and 24 port versions, multiport Enterprise Midspans offer full 15.4 W per port and can upgrade existing architecture with total output power of 370 W. Power-over-Ethernet allows both power and data to be carried over single Ethernet cable. USB port enables diagnostic testing via laptop so no adapter cables are required. Each Midspan comes with software to control and monitor each port, along with full power management capability.

Schurter, Inc.    Petaluma, CA 94975-0158
Feb 07, 2005 Water- and shock-resistant MSM series features flat front construction of 1.7 mm for near-flush mounting. Combining detachable contact module with stainless steel housing and actuator, switches come in 3 sizes with 16, 19, and 22 mm mounting diameters. Switching action is single-pole, momentary with NO and NC contacts. Available with point or ring illuminated options, actuation force is 4.5 N, and contact travel is 1 mm with fixed stop and audible click.