Allegro MicroSystems Inc.    Worcester, MA 01615
Apr 30, 2012 Operating at temperatures up to +150°C, Model A1250 integrates voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and short-circuit-protected, open-collector output on single silicon chip. On-board regulator permits operation with supply voltages of 3.0-24 V. Available in modified SOT-23W surface mount package or ultra-mini-SIP for through-hole mounting, switch is suited for automotive, industrial, and consumer markets.

Cooper Crouse-Hinds Molded Products    La Grange, NC 28551
Apr 30, 2012 Suited for locations requiring continuous and consistent light levels in extreme ambient temperatures, Champ® Pro PVM Series, Champ® Pro PFM Floodlight Series, and Vaporgard(TM) Pro P2L Series provide 60,000 hour operating life and can replace 70-400 W equivalent output fixtures. Solid-state NEMA 4X devices are shock- and vibration-resistant and void of any filament or glass components capable of breaking. For added life, heat sinks remove heat from LEDs and driver.

Larson Electronics, LLC    Kemp, TX 75143
Apr 30, 2012 With 500 V rating, Model EPL-TX-500-4-1MLED converts 220 V 50/60 Hz current to 120 Vac 50/60 Hz, distributes secondary output via four 20 A twist-lock explosionproof receptacles, and provides 10,000 lumens via 150 W explosionproof LED light, which is vertically adjustable. Dolly cart mounting configuration allows operators to roll entire unit into position and move it about as needed. With built-in hanging rack, operators can stow included 25 ft explosionproof cord.

LEVITON    Melville, NY 11747
Apr 30, 2012 Providing up to 32 A at 240 Vac, Evr-Green(TM) 320 Level 2 Home Charging Station cuts charging time of SAE J1772(TM) compatible electric vehicles. Weatherproof NEMA Type 4 steel enclosure supports cord connected installation when used with Pre-Wire Installation Kit or can be converted to hard-wired installation. Station is also available with 18 or 25 ft charging cable. For safety, station has ground monitor circuit and built-in communication to verify proper connection before charging can commence.

Microsemi Corp.    Scottsdale, AZ 85251
Apr 30, 2012 Supplied in SMT packages, SA50-28 single-, dual-, and triple-output converters provide military and commercial satellites with continuous protection against naturally occurring total dose ionized radiation. Each 28 V input, 50 W output DC/DC converter features fully isolated power supply capable of driving high-reliability POL converters used to step down power to devices. Fully isolated synchronization scheme is also included to manage system noise spectra.

Binder-USA, LP    Camarillo, CA 93012
Apr 30, 2012 Suited for wide range of applications in nearly any industry, M8 and M12 Cordsets are available in single-ended and double-ended models with straight and right-angle connectors. Both sizes can accept 3-8 wires, and M12 connectors are available with A-, B-, and D-coding options. In addition, variety of cable types can be used to fit environmental conditions, including high-flex, abrasion immune, and coil-style cables.

Global Lighting Technologies    Brecksville, OH 44141
Apr 27, 2012 Edge-lit, square, LED-based, flat panel downlight assembly, offered as SSL solution for ceiling lights, delivers efficiencies greater than 70 lm/W using standard 2 x 2 ft troffer packaging with CRI of greater than 80. Using 100 LEDs with brightness levels up to 130 lm, UL-certified product produces up to 3,250 lm at color temperature of 4000K while consuming 46 W of power. LEDs are spaced along only 2 edges of light guide plate to maintain thin profile.

E-Mark, Inc.    Shelton, CT 06484
Apr 27, 2012 Optimized for use in single and double-sided PCBs, Test Points each fit 1.0 mm hole and are used for secure attachment of scope probes and flying leads for test and measurement purposes. Smallest bottom entry version has tin finish and provides plain 6 mm pin. Designed for top entry, larger sizes with gold finish are available as single turret 3.5 mm tall, extended 11 mm turret, and with dual 5.4 mm and 3 mm turrets. All are RoHS compliant and lead-free.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Apr 27, 2012 MVAB120 series of open frame single output 120 W power supplies measures 2 x 4 x 1.35 in. and is capable of delivering up to 75 W using convection cooling. To operate at 120 W full load output requires 250 LFM forced airflow. It accommodates full universal range of input voltages from 90-264 Vac and 120-300 Vdc, with 3 single output models covering nominal outputs of 12, 24 or 48 Vdc. It can deliver full load from -10 to + 50°C, and is capable of start up from -20°C.

Acuity Brands Lighting    Conyers, GA 30012
Apr 27, 2012 Designed to function in individual room or across entire facility/campus, nLiGHT® network lighting control technology integrates time-based, daylight-based, sensor-based, and manual lighting controls. It is also available Sensor Switch® nWiFi(TM), which adds conventional WiFi technology (802.11n) to nLight devices, such as occupancy sensors and relays, to enable them to seamlessly communicate with wired and wireless nLiGHT lighting control zones.

Advanced Protection Technologies Inc.    Clearwater, FL 33760
Apr 27, 2012 Used to protect BNC coax data signals with transmission rates up to 10 Mbps, BNCA10kA 3-stage hybrid, in-line surge protector is intended for severe service at BNC coaxial connections for video equipment. Product has 10 kA surge current rating and support DIN rail mounting. Designed to protect coax cabled equipment from power-induced overvoltage surges, BNCB5kA in-line coaxial primary surge protector kit includes SACX UL 497C-Listed coaxial SPD and 2 F to BNC connectors.

Cooper Lighting    Peachtree City, GA 30269
Apr 26, 2012 Comprised of 6 and 8-in. aperture downlights and 4 and 6 in. directional downlights, ENERGY STAR®-qualified Halo Commercial series accepts compact fluorescent, metal halide, tungsten halogen, and integrated LED lamping. Fully assembled and pre-wired, boat-shaped housing frame features pre-installed No Fuss Bar Hanger(TM) system, which accelerates installation from above or below ceiling. Open, lensed, and wall wash trims feature torsion springs aligned with universal 180° mounting positions.

Everlight Electronics Co. Ltd.    TAIPEI   Taiwan
Apr 26, 2012 Housed in ceramic package measuring 3.5 x 3.5 x 0.58 mm, Shwo D Series features standard operating current of 350 mA and can be driven at 1 W. Minimum luminous flux of 1 W units can be up to 110 lm at 6,500K or 80 lm at 3,000K when driven at 350 mA of current. LEDs are suited for variety of applications, such as general illumination, flash, spot, signal, industrial, and commercial lighting.

Green Watt Power    Concord, CA 94520-4841
Apr 26, 2012 With universal/full range input voltage of 100-277 Vac, GLC-18 Series offers stable 18 W output power and is available in 3 models of constant current output at 350, 500, and 750 mA with self-adjusting output voltage from 18-54 Vdc. Products come enclosed to IP67 standards in extruded aluminum metal case, offer efficiencies in 85% range, and integrate over voltage, over current, and over temperature protection. Active PFC of greater than 0.90 is standard on every model.

Pepperl+Fuchs    Twinsburg, OH 44087
Apr 26, 2012 Following AS-Interface specification 3.0, G10 AS-Interface Accessories include IP69K washdown-rated splitters and network terminator. One model provides flat cable connection for both AS-Interface and auxiliary power, and includes two M12 round cable connections, enabling 2 devices to be split off from one accessory. In addition to gold-plated piercing contacts, accessories have mounting holes in base, plastic cover with visible wiring instruction, and pass-through auxiliary flat cable tray.

L-Com, Inc.    North Andover, MA 01845
Apr 26, 2012 Supplied in industrial-grade, cast aluminum body with integral mounting feet, HGLN-D2T uses 3 terminal differential gas discharge tubes to provide protection for 2 separate lines with clamping voltage of ±230 V. Telephone/DSL/T1 lightning protector, able to be shelf- or wall-mounted, is made for indoor installations and comprises single pair of RJ11 jacks: one for input and one for protected output.

Cooper Lighting    Peachtree City, GA 30269
Apr 26, 2012 Energy efficient Halo Commercial line of 6 and 8 in. aperture downlights and 4 and 6 in. directional downlights accept compact fluorescent, metal halide, tungsten halogen and integrated LED lamping options. Products feature fully assembled and pre-wired boat-shaped housing frame with pre-installed hanger system. Ready-to-install trims include open, lensed, and wall wash, and torsion springs are aligned with 180° mounting positions. Downlights meet April 1, 2012 ENERGY STAR® requirements.

Gigavac, LLC    Santa Barbara, CA 93140
Apr 25, 2012 Designed to meet IEC529 and IP67 sealing standards against dust and water immersion to 1 m, Model BD9521 is suitable for any land-based battery application requiring up to 500 A continuous current. Unit supports continuous voltages to 32 Vdc and provides 150 mV maximum contact voltage drop. Switch eliminates need to remove cables making battery disconnection routinely safe. To prevent accidental switching, handle can be secured in on/off position with customer-provided zip tie or lock.

WinSystems, Inc.    Arlington, TX 76011
Apr 25, 2012 Intended for PC/104, EPIC, and EBX SBCs that support ATX power controls, Model PPM-DC-ATX features input range of 10-50 V, which allows operation with 12, 24, or 48 Vdc power systems. Unit generates 5 regulated DC output voltages from 1 common DC input: +5 V at 10 A, +3.3 V at 10 A, +12 V at 3 A, -12 V at 500 mA, and +5 VSTBY at 2 A. For SBCs with advanced CPU chipsets employing sleep modes and active power management, Model PPM-DC-ATX supports software-controlled shutdown and power monitoring.

Anderson Power Products    Sterling, MA 01564
Apr 25, 2012 Saf-D-Grid connector system is designed for direct connection of DC electronic devices to DC micro grid. Low profile panel receptacle fits standard panel cut-out for IEC320 C14 outlets while providing touch safe connections up to 20 A at 600 Vdc. Connectors are hot plug rated up to 700 A in-rush current at 400 V and shield user from arc flash during un-mating. System is targeted toward DC servers or any device connecting directly to renewable energy sources such as solar or wind power.