Loadstar Sensors, Inc.
Mountain View, CA 94043
Aug 27, 2008 Combining display and controller functions into singe unit, DS-3000 is 4-channel interface device for iLoad Series load cells. Users can connect up to 4 iLoad series load cells and view individual and/or total loads in 3 different units including Kilograms, Pounds, and Newtons, and can also interface via USB uplink to plot/chart data to any PC. Optional relay outputs allow users to activate relays based on load limits in order to control up to 2 external devices.

Kingbright Corporation
City of Industry, CA 91789
Aug 26, 2008 Measuring 1.6 x 0.8 x 0.25 mm, Kingbright 0.25 mm Ultra-Thin 0603 SMD LEDs (APG1608 package) offer viewing angle of 120° and operate using current as low as 1 mA. Blue (470 nm), green (525 and 571 nm), yellow (589 nm), orange (605 nm), and red (631 nm) versions are available, each meeting industrial temperature rating of -40 to +85°C. Designed for automatic pick-and-place mounting process, package provides zener diode option to withstand ESD voltage up to 8,000 V.

Dymax Corp.
Torrington, CT 06790
Aug 07, 2008 Suited for spot curing of coatings as well as adhesive bonding of polycarbonate, PVC, PET, metal, glass, and other substrates, BlueWave® LED generates light using array of surface mount LEDs instead of traditional metal halide or mercury bulbs. LEDs produce visible light energy in narrow wavelength band centered at 410 nm. System emits maximum visible-light intensity output of over 2,500 mW/cm² from 8 mm dia lightguide, and allows users to adjust intensity output from 0-100%.

Chloride Systems
Burgaw, NC 28425
Jul 31, 2008 Designed to fit any architectural space, white LED edge-lit Caliber Signage offers computer-generated custom graphics and wording to match wayfinding or informational needs. Installation accommodates recessed ceiling, surface ceiling, surface end, and surface wall mount configurations. Panel is manufactured from high-impact acrylic with silk-screened computer-generated artwork. IC rated unit is listed to UL 48 standards, and meets damp location listing standard.

Del City
Milwaukee, WI 53209
Jul 28, 2008 Rated to meet SAE Class 1 vehicle requirements as well as SAE J845 specifications, LED directional lights feature 42 LEDs encased and securely sealed in epoxy material. Self-contained electronic control lets lights be wired directly to 12 V power switch, eliminating need for installation of driver compartment control box. Surface mount light can be installed on any flat surface, while grommet-mount versions can replace existing oval directional lamps.

Electro-Matic Products, Inc.
Farmington Hills, MI 48335
Jul 21, 2008 Offering flexibility in creating electronic messages, Model 4U2SEE utilizes LEDs for red, green, and amber colors with average lifetime rating of 60,000 hours. Sign can display either 2 lines of 5.5 in. characters or one line of 12.5 in. characters. In addition to standard RS232 or RS485 communication options, display includes Ethernet port. Full time of day and calendar feature enables scheduling messages or showing time and date on display.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Jul 14, 2008 With 16-bit (65,536 steps) grayscale control with spectrum PWM, TLC5943 16-channel, 50 mA constant-current sink LED driver improves image quality and reduces flicker noise in monochrome, multicolor, and full-color LED displays, as well as LED signboards and display backlighting. It features 7-bit (128 steps) global brightness control for all channels with sink current, 30 MHz data transfer rate, 3.0-5.5 V VCC, and ±1.5% channel-to-channel and ±3% device-to-device constant current accuracy.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Jul 14, 2008 With ability to control color and brightness of lamp or run automatic color light animation program, TPS62260LED wireless RGB LED design kit combines with eZ430-RF2500 development tool to design new color lighting for commercial, professional, and architectural applications. Designers generate color with 3 OSRAM high-brightness LEDs (red, green, and blue). MSP430F2131 low power MCU controls brightness of each LED with constant current generated by 3 TPS62260 LED drivers, one for each LED.

Avago Technologies
San Jose, CA 95131
Jul 10, 2008 Model ASMT-MW09 is 1 W LED with low profile design that delivers high flux output of up to 95 lumens at 350 mA drive current. Encapsulated in heat and UV resistant silicone compound for long life, energy efficient emitter provides wide viewing angle radiation pattern as well as low thermal resistance. Features include exposed pad design that transfers heat from package to motherboard. Available in color temperatures ranging from 4,000 to 10,000 K, device is Pb-Free and RoHS compliant.

Catalyst Semiconductor
Sunnyvale, CA 94089
Jun 25, 2008 Suited for portable products, CAT3637 is able to drive up to 6 LEDs at 30 mA each, in 2 mA steps via simplified 1-wire EZDim(TM) interface control that supports 16 output power levels. Fourth charge pump mode of driver achieves 1.33x boost mode with 2 flying capacitors. Available in 3 x 3 mm, low profile 16-pad TQFN package, unit offers up to 92% power efficiency and is optimized for applications with one bank of 5 or 6 identical LED channels.

OSRAM Opto Semiconductors GmbH
Regensburg D-93049  Germany
Jun 19, 2008 Measuring 5.8 x 4.7 x 1.5 mm, OSTAR® Projection SMT LED is suited for standard soldering processes and does not require additional connectors on board for electrical interface. For 1.5 x 3.0 cm embedded cell phone pico projector, it provides system brightness of 10 screen lumens with power consumption of 1 W, while for versions measuring 7.5 x 7.5 cm, it offers brightness values of more than 15 lumens. Single module contains four 1 mm² RGB chips, including 2 green, 1 red, and 1 blue.

Hewlett-Packard Co. (Corporate Headquarters)
Palo Alto, CA 94304-1185
Jun 19, 2008 Featuring LCD that provides more than 1 billion colors in 30-bit LED-backlit display, HP DreamColor computer professional display addresses need for consistent color accuracy in animation, film/video post, broadcast, product design, and graphic arts categories. It includes one-button access to 7 pre-sets covering all important color space standards. Unit features night vision interface for darkroom working conditions, DreamColor engine software, and DreamColor calibration kit.

Dymax Corp.
Torrington, CT 06790
Jun 02, 2008 BlueWave LED generates light using an array of surface mount LEDs that produce visible light energy in narrow wavelength band centered at 410 nm. Emitting maximum visible light intensity output of over 2,500 mW/cm² from an 8 mm dia lightguide, system allows users to adjust intensity output from 0-100%. BlueWave LED is suited for spot curing of coatings, as well as adhesive bonding of polycarbonate, PVC, PET, metal, glass, and many other substrates.

Endicott Research Group, Inc.
Endicott, NY 13761
May 29, 2008 Smart Force(TM) boards with less than 5 mm height provide compact solution for customers who are backlighting LCDs up to 15 in. diagonal. They offer full function power supplies and brightness stability over wide input voltage and can power up to 6 LED strings. SFDE Series measures 1.11 x 3.10 in., and offers 10-20 V input voltage range with external PWM dimming to 500:1, while SFDM Series measures 0.96 x 2.19 in., and has 8-20 V input voltage range with external PWM dimming to 250:1.

Omega Engineering, Inc.
Stamford, CT 06907
May 09, 2008 Featuring red LED display window, G3 Big Flexible Display connects directly to RS485 port of G3-series HMI. Designed by using 32 display boards in 8-column by 4-row configuration that displays text and graphical information to entire plant floor, unit is suited for plastics, paper, water treatment, and asphalt manufacturing industries. It features field-replaceable display boards, flexible eyebolt mounting, optional NEMA 4 cooling kit, and universal ac power.

National Semiconductor Corp.
Santa Clara, CA 95051-0695
Mar 31, 2008 Model LM3553 enables dual LED operation for camera flash in portable multimedia. Flash driver is fixed frequency dc/dc converter with 2 regulated current sinks and drives loads up to 1.2 A. It includes adjustable over voltage protection circuitry which allows drive of 2 high current LEDs in series configuration. Features include time-out protection, internal soft-start, and fast switching frequency. Configuration is achieved via I2C compatible interface.

Innovative Lighting Inc.
Roland, IA 50236
Mar 20, 2008 Utilizing 2 LED configuration, 257 series Slimline 2 LED sidemarker/clearance light is both shockproof and impact-resistant. Meeting DOT specifications, P2 P3 rated light measures 4.5 x 1.6 x .8 in., employs electronic chips embedded in epoxy, consumes only 35 mA, and can be mounted vertically, horizontally, or at 45° angle. Suited for truckers and trailer users, unit is available in red or amber LED models with red, amber, or clear lens.

HOTO Inc.
Northbrook, IL 60062
Mar 11, 2008 ESL-20 series LED stroboscope measures speed of rotating or cycling linear motion objects without contact or reflective tape and can freeze motion visually. Compact, 1.2 lb device features rugged aluminum housing, NiMH rechargeable battery, high-efficiency LED solid-state light source, and 5-digit, 0.47 in. LCD. With measuring range of up to 120,000 fpm/rpm, it allows 359° digital phase shift adjustment by 1° increments and stores up to 10 flash rates in memory.

AZ Displays, Inc.
Aliso Viejo, CA 92656 1498
Feb 21, 2008 With 5.7 in. diagonal viewing area, Model PD057VT1 digital active matrix TFT panel p/n allows users to display content of lower resolution on higher native resolution of LCD (VGA format of 640 x 480 pixels). It features 262,144 colors, operating temperature range of -30 to +70°C, storage temperature of -40 to +80°C, stripe pixel configuration, built-in white LED backlight, and TTL interface. Module size is 144.0 x 104.6 x 13.0 mm, while viewing area is 118.4 x 89.6 mm.

LEDdealer
Redondo Beach, CA 90278
Jan 22, 2008 Designed to replace 5/6, 12/14, 24, 28, and 48 V incandescent bulbs, LDR-BS-6/48V comes in T 3¼ (9 mm) bayonet base that mounts directly into industry-standard sockets. Bi-polar nature eliminates lead polarity as factor of consideration for installation, and solid-state design is impervious to shock, vibration, frequent switching, and environmental extremes. Bulb operates at standard voltages of 6-48 Vdc and produces 6,500 MCD of brightness with viewing angle of 40°.