Display & Presentation Equipment
Operating from 100–277 Vac without any modifications, IP67-waterproof WAL-LQP-320WSA-LED outputs 29,446 lm via 32, 10 W CREE XM-L2 LEDs that are arranged in rows and paired with high-purity optics to produce 40° or 60° beam spread. Removable light head assembly is mounted atop 4-leg, aluminum quadpod, which can be extended to 9 ft and collapsed to 5½ ft and has wheels for facilitated positioning/transport. Construction is of heavy-duty aluminum with stainless steel hardware. Read More
Retrofitted in 5 min to replace fluorescent, incandescent, and HID lighting in architectural/commercial applications, 8 in. ECO Series LED Recessed Retrofit Downlights deliver up to 2,200 lm while consuming 25 W (80 lm/W). Supplied driver accepts 120–277 V input without any adjustment and offers dimming compatibility for all input voltages using 0–10 V controls. ENERGY STAR®-qualified product comes in 3000K and 4000K CCTs as standard; custom options, such as 2700K and 5000K, are available. Read More
Used for marketing, advertising, or visual display, LED Indoor Backlit Light Box with LED Strips comes in 2,700 lm (standard output) and 7,300 l (high output) options. Indoor options for ADA-compliant frame design include hinged side access Standard Slim Line aluminum frame and snap open Front Access aluminum frame. Depth is 2 7/8 in., and graphic sizes are available up to 48 x 96 in. For outdoor conditions, Backlit Light Box comes in weatherproof, locking, Hidden Hinge Frame design. Read More
Available for new or existing residential or commercial closets and storage locations, clear anodized aluminum LED Closet Rod Light Kit comes with closet rod, LED ribbon flex lighting strip, and 2 mounting brackets. Supplied lengths of 3, 4, and 5 ft can be trimmed as needed in 2 in. increments while on job site. Delivering cool white (6,500K) light with 120° beam spread and ~50,000 hr bulb life, kit also supports various options: power supply, IR door sensor, and manual on/off switch. Read More
With 10 poles and 32, 378 W LED fixtures, LED tennis court lighting package provides and maintains balanced lighting at 52.84 average footcandles for quad courts or 4 adjacent tennis courts. Luminaires have instant-on/-off capabilities and carry 100,000 hr LM70 rating, which minimizes maintenance concerns, and product illuminates quad courts from exterior of fence around court. This eliminates need to put pole-mounted luminaires between courts and associated trenching/hole digging. Read More
Leveraging chip on board LED package to optimizes lumen output, LED PAR30 and PAR38 lamps are offered in 3000K and 4000K color temperatures and rated for 25,000 hr lifetime at L70 standards. Lamps are suited for retrofitting recessed, track, and other lighting fixtures operating on 277 V electrical systems; can also be used in damp locations; and operate from -4 to +104°F. While 17 W PAR38 delivers up to 1,800 lm with 40° beam angle, long neck 13 W PAR 30 produces up to 1,200 lm.
In addition to built-in LED backlight drivers and LVDS interface, Kyocera 7.0 in. WVGA LCDs feature fully integrated PCAP touch sensors. On-Cell Touch (OCT) technology applies insulation between electrode patterns directly to top layer of LCD. This eliminates separate touch panel, reduces display thickness, eliminates interior optical reflections, and improves visibility/brightness/intensity/viewing-angle. Touch controller is part of display's PCB, housed within LCD's shielded metal case.
Suited for off-air monitoring of on-air broadcasts via RF or IP for master control or ENG (Electronic News Gathering) trucks, Allview 8VSB/HD-SDI+IP™ features 8VSB, IP unicast or multicast (with Pro-MPEG FEC), and DVB-ASI inputs as well as outputs for IP, SDI/HD-SDI with embedded audio, DVB-ASI, analog, and MPEG -1/2 or AC-3 audio. System can automatically switch between RF and IP inputs and supports AES-3 id audio as well as PCM. Optional DVB-S/DVB-S2 or DVB-T+T2 tuner is also available. Read More
Run directly off 110–277 V supply, LEDT8-28W-V1 produces 3,500 lm per bulb, can be configured for any T series fluorescent light fixture, and does not require ballast for operation. This 28 W LED tube lamp, which works with any T8 fluorescent light fixture, has single-ended power design and rotating pins that let operators adjust direction of light dispersion after installation. Directional bulb with light-diffusing polycarbonate lens offers 160° beam spread and comes in aluminum housing. Read More
Deliver cool-white lighting for on- and off-road vehicle applications, Optilux® LED lights are built for durability and extended performance. Products include Optilux 4 in. LED Fog Lamp Kit, Optilux Cube 4 LED Driving/Flood Lamp Kit, Optilux Cube 4 LED Spot Lamp Kit, Optilux 6 in. MINI Light Bar 6 LED, Optilux 7 in. Modular Light Bar 3XL LED, Optilux Light Bar 12 LED Light Bar, Optilux Light Bar 40 LED Light Bar, and Optilux Light Bar 60 LED Light Bar. Read More
Targeting retail and SMB markets, ENERGY STAR® 6.0-certified SE3B series offers 5 screen sizes from 32–65 in. with respective diagonals from 31.51–64.53 in. Bezel width is 11.9 mm at thinnest point, and circuit boards have clear, non-conductive, protective conformal coating. Dual USB ports enable control of signage monitors and distribution of content via Wi-Fi®. Along with support for third-party device management through SNMP standards, features include Sustain Aspect Ratio mode. Read More
Industrial LED light bar, intended for automation and industrial machinery, comes in 9.8, 14, and 16.25 in. lengths; carries IP69K rating; and withstands high-pressure washdowns as well as exposure to such liquids as oils and coolants. Rated 24 V per lamp and 5.7 W for smaller LED bar, LEDs produce neutral 4,000K white light for 50,000 hr. Flexible installation of these field-attachable lights is enabled by Binder M12 male connector for connection to power supply or crossover cable. Read More
Available in 4, 7, and 10 in. display sizes, Allen-Bradley PanelView 800 terminals feature 800 MHz CPU processor, up to 256 MB Flash, and dynamic memory to reduce boot-up time. Touchscreens are optimized for responsiveness and can be configured in portrait and standard landscape mode for installation flexibility. Designed for use with Allen Bradley Micro800 and MicroLogix control systems, these Class 1, Division 2 certified terminals integrate Ethernet, serial, USB, and microSD ports. Read More
Offering tungsten (3200K) to daylight (5600K) brightness settings, Newz variable white light suits broadcast news and other run-and-gun shooting applications. Articulated arm design lets shooters adjust light's height and angle, while ZyLink™ wireless technology for networking and remote control. Employing quantum dot technology and proprietary LED chips, fully dimmable light has custom barn doors and provides 60° beam spread at full width half maximum (FWHM) for soft falloff around edges. Read More
Available with Class 1, Division 2, temperature class T4A option, EZ-ZONE® EZK can be utilized as communications gateway device to conserve space and wiring when digital communications are being used with two or more EZ-ZONE® controllers. Modbus® RTU, DeviceNet™, EtherNet/IP™, Modbus® TCP, and PROFIBUS DP connection options are supported as standard, and remote user interface (RUI) can also serve as display for showing all parameter values for up to 16 EZ-ZONE controllers. Read More
Able to replace up to 400 W metal halide products in general area, building façade, wall wash, and sign lighting applications, Lumark Night Falcon™ comes in 9,400 and 14,600 lm packages that respectively consume 85 and 129 W. Optics ensure delivery of uniform illumination, and lumen maintenance is >90% at 50,000 hr. Offered with standard 4000K CCT or optional 3000K and 5700K CCTs, <25 lb luminaire comes in die-cast housing. Optional presence detection sensor allows dimming to 50% lumen output. Read More
SmartLight offers up to 3 modes of operations – stack light, level indicator, and run light – that can be switched on-demand based on programmed conditions to provide process feedback. Multi-purpose models are available with 1, 3, and 5 segments, each of which consist of multiple LEDs and can be programmed for user-selectable colors and brightness levels. IO-Link technology makes products adaptable to network or field-bus, and all configuration/programming is done in controller or PLC. Read More
Available for 120–277 V and 347–480 V applications and other product variants, Vigilant® H2 Series comprises IP66-rated LED high bay lighting fixtures capable of delivering ~25,000 lm output with 140 lm/W efficiency. UL1598A-certified and CE-compliant design incorporates proprietary reflector technology, tempered glass lens, and power supply in durable and lightweight (18 lb) package. Ambient temperature operation range is -40 to +65°C.
Featuring open box design that eliminates need for cooling fans, FTX Digital Billboard is available in 5 sizes, suitable for indoor and outdoor advertising. Grid-based LED tile design facilitates repairs, while sealed, weathertight LED tiles and connectors eliminate common problems associated with typical electronic billboards. With specialized billboard software, owners receive live diagnostic feedback. Read More
Along with aluminum front bezel, IP65-rated, ACD-110D features 10.1 in. projected capacitive touchscreen with multi-touch capabilities, 1280 x 800 resolution, and 16:9 aspect ratio. Scratchproof touchscreen is also reinforced to resist ingress of dust and water. This industrial monitor, which can be wall mounted or set upright with provided stand, can be used as interactive product information platform or as member of any in-vehicle entertainment system. Read More