Display & Presentation Equipment
Measuring 105.50 x 67.20 x 4.10 mm, TM043NBHG04 utilizes 4-wire resistive touch panel and offers 95.04 x 53.86 active area, 480 x 272 resolution, 800 cd/m2 luminance, 800:1 contrast ratio, and 4.3 in. diagonal. Measuring 164.90 x 100.00 x 5.70, TM070RVHG04 uses PCAP touch solution with perimeter bond and offers 157.00 x 92.80 active area, 800 x 480 resolution, 1,000 cd/m2 luminance, 500:1 contrast ratio, and 7.0 in. diagonal. Both MCU-driven modules provide RGB interface. Read More
Featuring 2 self-contained parallel systems with 2 chips each, P2W 01 LED provides redundant integrated solution that, in event of emergencies, offers trouble-free operation in safety-related and security-related applications such as control room monitors. High-current chips are based on advanced thin-film and UX:3 chip technologies, resulting in bright vivid images. Measuring 27 x 16 x 2.1 mm with illuminated area of 2.6 x 3.2 mm, LED is intended for rear projection systems. Read More
Available with embedded Intel® processor for operation without additional PC system, SVDU1800 touchscreen LCD provides 1,920x1,080 native resolution as well as brightness and contrast needed for legibility in diverse lighting conditions. Optically bonded construction lends to SWaP-optimized design, and customer-developed software can be hosted using built-in flash storage. Used on ground vehicle and airborne platforms, display also features built-in support for Night Vision Goggle viewing. Read More
Dynasty® Omni LED lamp series can be used as direct, plug-and-play replacements for traditional, high-wattage (up to 1,000 W) lamps, including Metal Halide, HID, High-Pressure Sodium, and Mercury Vapor types. Accommodating 100–277 Vac input, these UL- and LDL-certified products offer full 360-degree light beam and come in various color temperatures and power levels.
With 8 inputs, DigitalMedia™ HD-MD8X1-4K provides 4K auto-switching for small rooms that require connection to room display via HDMI®. Built-in 4K scaler can convert any resolution to any other resolution, up to 4096 x 2160. DM-MD8X1-4K-C delivers all features of HD-MD8X1-4K, plus mic input and DM output, so HDBaseT® can be run to room display. DMPS3-4K-150-C adds 3-Series Control System® and 2 DM inputs for 10X1 4K switching solution. All are built on Crestron .AV Framework technology. Read More
Featuring 19.5 in. diagonal screen size and 3840 x 2160 resolution, 4K2K LCD Panel utilizes Super Fine TFT2 technology, which is comparable to In-Plane Switching. SFT2 maximizes efficiency of light utilization, delivering 1000 cd/m² luminance with low power consumption. Because module generates less heat, it does not need cooling fan. SFT2 also suppresses change of color tone when viewed from angled position. Typical applications include broadcasting, graphic design, and medical imaging. Read More
Promoting worker productivity and ergonomics by delivering uniform output, WLB92 comes in AC (DLC qualified) and DC models with rugged metal housing and shatterproof light cover. Connection options include AC quick disconnect and AC conduit, whiles mounting options include surface, swivel, snap, and hanging brackets. Along with optional dimming function, features include 550 or 1,100 mm lengths and conduit knockouts that help ensure continuous run and permanent installation. Read More
Consisting of removable light head assembly mounted atop 4-leg, aluminum quadpod featuring solid wheels, IP67 waterproof WAL-QP-2X400LTL-LED-100 provides ~50,000 ft² coverage with 104,000 lm as supplied by two 400 W LED light heads. This portable, industrial grade light tower features heavy-duty aluminum construction and stainless steel hardware and comes with 100 ft of SOOW cord. Adjustable and collapsible quadpod extends to 12 ft and collapses to 7 ft.
Offered as surface mount replacements for 400 W metal halide fixtures used in fuel service applications, eLucent™ Nebula LED Gas Station Canopy features 3 in. profile that facilitates mounting and retrofit installation into existing single- or double-skin canopies. This 120 W luminaire, with L70-rated lifetime of 100,000 hr, features 5000K CCT and offers 11,500 lm, >95% efficacy, and >80 CRI. Light-grade diffuser and LM80-rated LED chips reduce glare and optimize thermal management. Read More
Constructed of die cast aluminum and concealed inside W Track, Paloma museum-quality LED luminaire supports LED beam angle adjustment from 15° to 60° via fingertip control. Features include lockable 365° horizontal rotation and 180° vertical aiming with indexing scales; smooth and continuous dimming with electronic low voltage (ELV) dimmer; and color temperatures from 2700K to 4000K. Unit operates on 24 W and delivers up to 1,350 lm and center beam candlepower up to 8,555. Read More
Featuring Luxeon 120 LED module providing 400 W and 36,000 lm, 35.5 x 15 x 7 in. Razar G complements contemporary architectural trends toward clean, minimalist appearance. Optical housing is 2.5 in. deep, reducing visual conflict with surrounding architecture, and available distribution patterns include Type II, III, and IV as well as Type V Sq. Rotatable LED modules (in 90° increments) and pole mounting configurations, from single- to quad-head, allow complete coverage of any site. Read More
Battery- or mains-powered and integrated with LTE networks, MissionCaster™ HD accepts up to 2 simultaneous inputs – HD/SD Digital, NTSC/PAL, VGA, HDMI – and includes up to 512 GB of local storage. Broadcasting securely with <1 sec latency, mobile solution works with any commercial drone (air, ground, surface, or subsurface). MissionCasterTV™ service, scalable from one to thousands of viewers, integrates with cloud infrastructure and supports integrated real-time, 2-way voice communication. Read More
Setup using 3 buttons, LPD inserts into 4–20 mA loop-powered sensor system to provide local display without additional wiring. Secondary purpose is converting analog signals to digital Modbus signal. Supplied in IP67 housing, display can be used in places where explosive gases might be present and lets users connect up to ten 4–20 mA sensors to any of Tank Cloud’s Modbus masters. Five-digit display features 0.4 in. characters and 6-digit description line. Read More
Available in swivel head, high-intensity fixed focus head, and slim aluminum lamp head models, Sirrus Industrial Grade LED task light offers 25,000 hr-rated alternative to fluorescent lighting in diverse applications. Design allows adjustment to facilitate examination and inspection of close-up work, and 19.5 in. industrial grade flexible arm is coated for protection against permeation by dust and liquids. While metal mounting clamp is supplied as standard, magnetic base is optional. Read More
Compatible with MaxLite internal driver LED T8 replacement lamps, Lamp Ready series enables installers to avoid bypassing ballast and adopt LED technology while keeping UL-listing of product intact. New construction housing is UL-listed for LED replacements lamps that do not need a ballast. All fixtures – Vapor Tight (2- and 3-lamp), Utility Strip (1- and 2-lamp), and Linear Highbay (4-, 6-, and 8-lamp) – come pre-wired for contractor-ready installation. Read More
While delivering brightness of 2,000 W Tungsten or 400 W HMI fixture, portable F8-200 LED Fresnel can be powered by AC or batteries. IP54 design, which collapses to <5 in. thick for transport, includes active cooling system. Other features include adjustable beam spread of 16° to 70°, focusing system for spot and flood operations, as well as 8 in. SCHOTT glass lens that maintains single shadow traditional Fresnel beam shaping. Tungsten (3200K) and daylight (5600K) versions are available. Read More
Available in flush and surface mount, 22 in. Touch Telephone Access System offers customizable solution for occupant and visitor access control in condominiums, apartment buildings, office buildings, gated communities, and industrial buildings. System runs Windows-based operating system and uses custom interface modules for ADC/NSL telephone interconnectivity. Variety of programming options is available via built-in USB or Ethernet ports, as well as modem and COM-to-RS485 modules. Read More
Designed for speed and frequency measurements in motion and vibration analysis, Series DT-326B comes in 8.2 x 2.8 x 2.4 in. ABS enclosure, uses LED array to provide bright, stable strobe light over measurement range, and operates for up to 12 hr on one charge of rechargeable lithium battery. Flash rate range is 60–120,000 fpm (1–2,000 Hz), and accuracy is 0.01% ±1 digit FS @ 77°F. CE-approved unit can also be AC powered and supports input signal flash delay from: 0–999 msec (0° to 359°). Read More
Suited for handheld devices, 2.4 TFT transmissive Normal White features contrast ratio of 850:1, luminance of 450 candelas/m², and 8-/9-/16-/18-bit MPU parallel interface with 4 wire resistive control panel. Backlight utilizes 80 mA supply current at 25° room temperature and supply voltage at 3.3 V. While capable of operating from -20 to +70°C, display can be stored in temperatures from -30 to +80°C.
Supporting full HD resolution of 1920 x 1080, EXP2310-PL-RA offers 8 msec pixel response time, 250 nit brightness, and 800:1 typ contrast ratio. This 23 in. widescreen (16:9 wide aspect ratio) display mounts via compression collar, which solely requires rectangular cutout and provides NEMA 4 seal. Product is available in panel mount configuration with options that include resistive touchscreen and 304 stainless steel front bezel. Read More