Temperature Controllers

Controls & Controllers, HVAC

Water Temperature Control System suits restrictive processes.

August 25, 2015

Suited for high-temperature water applications, Duratherm MAX utilizes nonferrous and stainless steel materials of construction and seal-less magnetic drive turbine pump fitted with stainless steel impeller. Fan-cooled heat exchanger cools process fluid and eliminates thermal shock, flashing to steam, mineral buildup, and expansion noise. Along with top air discharge, features include stainless steel heater vessel and respective max temperature and pressure ratings of 380°F and 300 psi. Read More

Controls & Controllers, HVAC, Test & Measuring Instruments, Health, Medical and Dental Supplies & Equipment

Homeothermic Monitoring System targets small rodents.

August 20, 2015

Offering closed loop temperature control, Homeothermic Monitoring System utilizes small, flexible rectal probe to monitor animal's core temperature and heating pad to provide heat input. LCD touchscreen allows user to set target temperature and clearly view subject’s current core body temperature as well as set temperature at all times. If animal’s core body temperature deviates 2° from set temperature, audible alarms advise user. Read More

Sensors, Monitors & Transducers, Controls & Controllers

PTC Thermistors provide remote over-temperature sensing.

July 20, 2015

Featuring <4.0 mm body diameters, temperature levels from +80 to +150°C, and ±5°C tolerances, PTCSL03 Series provides remote over-temperature sensing in alternative energy, industrial, and consumer applications. Sensors feature max R25 of 120 Ω, max voltage of 30 V, dissipation factor of 5 mW/K, and thermal time constant of 6 s. Consisting of medium-resistivity doped barium titanate ceramic chip with copper-clad steel wire leads, devices offer long-term behavior of ΔT ≤1°C after 1,000 hr. Read More

Controls & Controllers, HVAC, Test & Measuring Instruments, Sensors, Monitors & Transducers

Temperature Controllers has UL listing and integrated design.

June 16, 2015

UL-Listed HALO® combines multiple sensor inputs, including process temperature, limit temperature, and current sensing, to allow monitoring of multiple heaters wired in parallel. Designed for use in remote locations that may pose limited accessibility issues for maintenance personnel, unit also offers Modbus RS-485 communications, DIO, hi/low alarm output, and ramp/soak temperature profiles. Plug-and-play operation is supported with SENTINEL® Gas and Pump Line heaters. Read More

Controls & Controllers, HVAC, Thermal & Heating Equipment, Test & Measuring Instruments

HPLC Column Temperature Controller features 5-program memory.

June 3, 2015

Designed to hold columns up to 30 cm long by ¼ or 3/8 in. diameter in mounting clips, EchoTherm™ Model CO50 features temperature range of 4.0–100.0°C, readable and settable to 0.1°C. Programmable chiller/heater uses PID control software to regulate temperature to ±0.2°C, and has Stable Temperature LED that illuminates when target temperature is stable to within ±0.2°C. Offering 5-program memory of 10 steps per program, Peltier-based CO50 can repeat any program from 1–99 times automatically. Read More

Controls & Controllers

Temperature Process Controller leverages touchscreen technology.

May 29, 2015

Supporting field-removable I/O modules, scalable F4T with INTUITION® incorporates 4.3 in., capacitive, color touch panel with GUI that provides customized control and intuitive navigation. Multiple communications options are available, and multi-device functionality covers temperature PID, over/under temperature limit, power switching, math, logic, timers, and counters. Screen personalization allows channels, alarms, and I/O to be programmed with user-defined specifications. Read More

Controls & Controllers

Thermoelectric Controller protects critical equipment.

April 29, 2015

Intended for Thermoelectric Assemblies, SR-54 Series Bi-Directional Programmable Controller features built-in monitoring and control intelligence. Microcontroller-based device drives TEAs to exact temperature set points in cooling and heating mode. Unit accommodates up to 3 NTC thermistors and can control temperature to within ±0.15°C under steady state conditions. With SR-54, alarm features can be programmed to identify problematic fan, thermoelectric module, thermostat, or temperature sensor. Read More

Controls & Controllers, HVAC

Electronic Temperature Control protects electronics from heat.

April 16, 2015

Available for Dual Cabinet Cooler® Systems installed on large or high heat load enclosures, ETC will keep enclosures cool while minimizing compressed air use. Systems are available in cooling capacities up to 5,600 Btu/Hr and produce 20°F air to eliminate high temperature malfunctions. Digital LED readout displays temperature of electrical enclosure, then displays user temperature setting when pressing Push-to-Set button. When that setting is exceeded, Cabinet Cooler System is activated. Read More

Controls & Controllers

PID Controllers monitor multiple applications on one display.

March 26, 2015

By inserting field-installable FlexCard™ modules, users can populate PAX®2C Proportional-Integral-Derivative Controllers in more than 150 configurations to monitor and control multiple application processes on single display. Process Input/Remote Setpoint Cards support input of 0/4–20 mA to enable cascade control loops where tighter control is required. Providing heater current input, Heater Current Monitor Cards can signal when heater or heater control devices have failed before damage occurs. Read More

Controls & Controllers

Temperature and Process Controllers offer 20 samples/sec.

March 20, 2015

Equipped with 3-color, 9-segment LED display, PLATINUM™ Series offers full autotune PID with fuzzy Logic Adaptive Control, up to 99 chainable Ramp Soak programs, and built-in excitation firmware selectable at 5, 10, 12, and 24 V. Microprocessor-based units also have universal inputs for thermocouples, RTDs, thermistors, bidirectional and process voltage, and process current. Offering 2 or 3 programmable outputs, series is suited for laboratory, factory automation, and chemical industries. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers, Controls & Controllers

Thermistor Probe Data Logger offers wireless connectivity.

March 19, 2015

With 2 external probes, Lascar EL-WiFi-DTP+ measures temperature of environment from -40 to +125°C with typical accuracy of ±0.2°C. Unit can operate for up to 6 months on rechargeable internal lithium polymer battery. Logger's sensor collects data unattended while WiFi router sends data to FilesThruTheAir™ Cloud Storage Service, enabling users to manage and monitor sensors over Internet from any location. When alarms occur or if device needs attention, cloud can also send email alerts. Read More

Controls & Controllers, Electronic Components & Devices

Fixed Voltage, 5 V Linear Voltage Regulators operate up to 175°C.

February 18, 2015

Ruggedized for automotive and industrial applications, CMT-ANTARES delivers up to 200 mA to output load from 5.5–30 V input. Output voltage is stabilized to 5 V ±5%, including all possible variations: initial accuracy, temperature changes from -55 to +175°C (Tj), line and load regulations. Immune to latch-up and resistant to ESD events up to 6 KV (HBM), chip is also protected against short circuits and power overloading by current limiter and has OTP triggering above 225°C (Tj). Read More

Controls & Controllers

Temperature Process Controller provides dual LED displays.

January 29, 2015

With J, K, R, and S thermocouple inputs, CN243 Series 1/16 DIN Controller can monitor and control temperature or process applications using PID or on/off control. Dual LED displays provide local indication of process value and setpoint value. Controller also features process inputs, RTD and thermistor inputs, alarm functions, 3-step ramp and soak, digital input, and password protection. Unit is suited for factory automation, refrigeration, semiconductor line heating, and plastics processing. Read More

Controls & Controllers, HVAC

Transformer Temperature Controller supports remote operation.

January 27, 2015

Intended for dry-type and hermetic oil-filled transformers, NT-210 features control for cooling fans and full digital communication output protocols. Electronic TPL210 sensor, installed directly on transformer, controls oil temperature, vacuum pressure, sudden pressure rise, and liquid oil level. System reliability is ensured by full circuit self-diagnosis, and sensor data is transmitted via RS485 to NT-210, which can be directly installed on control panel, allowing remote control. Read More

Test & Measuring Instruments, Controls & Controllers, Sensors, Monitors & Transducers

Wireless Temperature Datalogger supports medical monitoring.

November 18, 2014

Suitable for medical refrigerator/freezer, WiFi-enabled Accsense A2-05W features inputs for 2 external RTD temperature probes with temperature range of -100 to +100°C and additional input for thermocouple measuring down to -200°C for cryogenic storage units. Datalogger supports 802.11a/b/g/n specifications as well as WEP, WPA, WPA2, 802.11i, and 802.1x Supplicant. Users can login through any Web browser to view real-time reports and graphs of data or configure system from anywhere via Internet. Read More

Controls & Controllers

Temperature and Process Controller features 2 PID sets.

November 6, 2014

Offering heat/cool operation, soft start function, and self-tuning startup, Model 6060 is suitable for industrial ovens and furnaces, boiler and steam processes, heat treatment, chiller and refrigeration systems, and laboratory/test equipment. Universal and optional input plus 4 digital inputs combined with 6 outputs provide extensive I/O flexibility. Available with Modbus/RTU RS485 communications, 1/16 DIN single loop controller supports 16 operational profiles, each having 16 segments. Read More

HVAC, Controls & Controllers

Temperature Controller suits microfluidic applications.

September 19, 2014

Chemically resistant, 4 ¼ in. wide Meros TCU-100 enables temperature control from 1° to 100°C for microfluidic chips, microscope slides, and other third party devices in biological and chemical applications. Temperature control options include cooling, heating, and thermocycling with 0.5°C accuracy, stability and target temperature resolution of 0.1°C, and ramp rates up to 1°C/sec. Operation, datalogging, and graphical data display are achieved via Flow Control Centre or third-party software. Read More

HVAC, Controls & Controllers

Hybrid Temperature Control suits commercial cooking appliances.

August 12, 2014

Equipped with analog to digital converting microcontroller and precision voltage reference, Hybrid Temperature Control is calibrated by depressing tactile switch, with control dial set to 350°F. Auto calibration is nominally accurate to within ±2° of dial set point. If more accuracy is desired, second tactile switch allows multiple offsets of ±1.5°F higher or lower, up to ±20°F. LED based control diagnostics help indicate operating mode and diagnose control system faults. Read More

Controls & Controllers

Digital Valve Controllers suit hostile environments.

July 30, 2014

With remote mounting, Fisher® FIELDVUE™ DVC6200p Series is suited for applications in which accessibility, extreme temperatures up to 250°F, extreme vibration, or confined space make integral mounting difficult. Only valve position feedback is mounted on control valve, while remainder of controller can be mounted over 300 ft away in less severe or more accessible environment. Utilizing PROFIBUS PA, DVC6200p Series provides alerts, trends, and diagnostics for visibility and control. Read More

Controls & Controllers

Temperature Process Controllers feature dual LED displays.

June 3, 2014

Designed to accept inputs from J, K, R, and S thermocouples, RTDs, and thermistors, CN142 Series includes 3 step ramp/soak control feature as well as alarm, event, and timer functions with optional RS485 communications. Control methods include on/off, PID, auto-tune, and manual-tune. Operating from 24–230 Vac/Vdc, CE-compliant universal controllers are password protected and suitable for precisely monitoring and controlling temperature or process applications. Read More