Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
May 01, 2013 InstaSPIN™-MOTION torque-, speed- and motion-control software solution, targeting motor applications that operate in various motion state transitions, is built on InstaSPIN-FOC motor control solution. Used for achieving optimized sensorless motor control, solution optimizes complex motion sequences, reduces tuning to one parameter, and accurately tracks desired trajectories across operating ranges. Integrated SpinTAC™ components additionally feature disturbance-rejecting controller.

Sonics & Materials, Inc.    Newtown, CT 06470
May 04, 2010 Designed for streamlined RF signal switching of up to 8 ultrasonic converter stacks, multi-channel high voltage ultrasonic sequencer suits multiple ultrasonic welding, staking or inserting points on single application. Pre-programming of timing for channel switching eliminates need for additional sequence programming. Manual override function allows user to isolate and test any converter at any time.

Maxim Integrated Products    Sunnyvale, CA 94086
Nov 05, 2009 Respectively capable of simultaneously managing up to 12 and 8 supply voltages, MAX16065 and MAX16066 are flash-configurable sequencers/monitors that integrate ±2.5% accurate current monitoring/group sequencing as well as ±1% accurate voltage monitoring/sequencing. Internal ADC and nonvolatile fault registers store and read back fault data. Also provided, graphical configuration tool helps generate data to analyze fault data or test different configurations.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Sep 25, 2009 Supplied in 64-pin VQFN package, UCD90120 features power supply margining and non-volatile error logging that allow users to diagnose power supply failures in their systems. Level of integration include 12 rails of sequencing; monitoring capability for up to 13 channels of voltage, current, or temperature; and 10 channels of power supply margining. Also included, Fusion Digital Power(TM) Designer GUI enables configuration via PMBus(TM)/I²C interface.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jun 18, 2009 Four-channel Pathway® M4441 DB9 RS232 Serial Data Port Sharer allows single destination port to automatically connect to any of 4 source channels based on data activity. Each channel is sequentially scanned or monitored for data activity and contends for connection. Once data is detected on single channel, remaining 3 channels are locked out until data traffic stops and is absent for preset period. Model 4441 then resumes monitoring of all 4 channels for data activity.

Air Logic, Div. Fred Knapp Engraving Co., Inc.    Racine, WI 53402
Feb 14, 2008 Designed for precise control in pneumatic circuits, Model R-6100 can be used as relay valve to sequence specific signal operation, or as relief valve to limit pressure. Fixed or adjustable pressure settings are available. To adjust valve, user turns adjusting screw clockwise to reach zero adjustment, then turns adjusting screw counterclockwise to desired relieving or sequencing pressure.

Supertex Inc.    Sunnyvale, CA 94619
Oct 13, 2006 RoHS-compliant PS12 provides 4 open drain outputs, each capable of sequencing power-up and power-down for telecommunications and networking systems. Along with individually programmable delays of 5-200 ms, solution features input voltage monitor, power-on reset generator, and 7 timers. Product accepts inputs up to 90 V and controls up to 4 loads through outputs that can connect to enable inputs of power supply modules directly or through level-shifting or isolating drivers.

AccelRate Power Systems, Inc.    Vancouver V6E 4G1  Canada
Sep 06, 2006 Designed for use with AccelRate® SC Chargers and other chargers using AccelRate High-Speed technology, AS-350 Sequencer enables 1-4 batteries to be connected to single high-speed charger, which then sequentially charges each battery. If extra time is available, unit sequentially equalizes each battery as well. Charger technology provides full state-of-charge to forklift truck batteries in 2 hours or less, without generating detrimental heat.

Emerson Process Management    Austin, TX 78754
Jul 07, 2006 Autocalibration Sequencer models SPS 4001B, IMPS 4000, and MPS 3000 help ensure O2 measurements are accurate for in-situ oxygen analyzers, without manually initiating calibrations. While SPS 4001B is designed for single-probe applications, IMPS 4000 and MPS 3000 suit applications with up to 4 O2 probes. Able to be added to existing oxygen installations, products are equipped with HART® digital communication and utilize Calibration Recommended diagnostics.

Zettler Magnetics, Inc.    Aliso Viejo, CA 92656
Oct 19, 2004 Used to stage heaters to prevent circuit overload, ZC series uses positive temperature coefficient and bimetal disc(s) to initiate switching action. Contacts close after specified time range. PTC is self-current limiting, ensuring stable switching action over voltage range. Featuring solid state construction, shock- and vibration-resistant product has operating temperature range of -50 to +165°F and contact rating from 12.5–25 A.

Lochinvar Corp.    Lebanon, TN 37090
Aug 18, 2004 MP2â„¢ Sequencer, designed to maximize performance of Copper-Fin®, Copper-Fin II®, and Efficiency+® boiler lines, acts as automated control system that determines when to fire each boiler, in what order, and for how long. It provides up to 9 on/off stages based on outdoor temperature, set point requirement, or external input signal. Features include indoor/outdoor reset; Proportional, Integral, and Derivative (PID) logic; and equal run-time rotation.

Micrel Semiconductor Inc.    San Jose, CA 95131
Mar 19, 2004 Operating from -19 to -80 V with 100 V surge protection, hot-swap Models MIC2589 and MIC2595 control external N-channel MOSFET to provide inrush-current limiting and over-current protection. Units allow safe insertion/removal of line cards from live -48 V backplanes. Available in 14-pin, SOIC packages, controllers/sequencers feature separate Power-is-Good control outputs for multiple dc-dc converters and detect output no-load condition.