Pressure Controls & Controllers

Test & Measuring Instruments, Controls & Controllers

Pressure Controller/Calibrator has versatile, modular design.

August 11, 2015

With modular design that provides flexibility to install modules with different accuracy classes within same chassis, 6270A can be configured for various pneumatic pressure calibration applications. Pressure ranges from low differential pressure to 3,000 psi with accuracy to 0.02% FS or 0.01% reading, and graphical interface features intuitive menu as well as multilingual options. Controller also works with Fluke Calibration COMPASS® for Pressure software and offers full remote interface. Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Miniature Pressure Regulators come in multiple configurations.

April 14, 2015

MAR-1 Series includes relieving designs, which maintain constant pressure output even when downstream conditions change, as well as non-relieving designs, which do not automatically compensate for changes in downstream flow or pressure. Supporting flows to 5 scfm, series does not vent to atmosphere. Output pressure can increase due to downstream event, and multiple adjustment options are available. Configurations include #10–32, M5, 1/8 in. NPT, R1/8, G1/8, and cartridge mount. Read More

Controls & Controllers

PID Controllers monitor multiple applications on one display.

March 26, 2015

By inserting field-installable FlexCard™ modules, users can populate PAX®2C Proportional-Integral-Derivative Controllers in more than 150 configurations to monitor and control multiple application processes on single display. Process Input/Remote Setpoint Cards support input of 0/4–20 mA to enable cascade control loops where tighter control is required. Providing heater current input, Heater Current Monitor Cards can signal when heater or heater control devices have failed before damage occurs. Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Vacuum Ejector offers 2 product options.

February 23, 2015

Based on energy-efficient COAX® technology, piCOMPACT® manifold-mounted and functional ejector system is available with M8 6-pin connection option. Threaded connection withstands pull force, making it suitable for moving and vibrating applications, such as robotics. Second option is air valve with cleanroom housing for rooms that have requirements such as ISO 14644. Virtually no air or particles will leak from unit if exhaust air is piped away. Read More

Chemical Processing & Waste Management, Controls & Controllers

Purge System operates in hazardous environments.

September 19, 2014

Delivering fully automatic solution in 316L stainless steel design for Div 2/Zone 2 applications, Series 5500 Type Z / Ex pz Purge and Pressurization System facilitates installation and operation of electrical components within hazardous locations. System combines control unit, EPV vent, and pneumatic solenoid or manual valve with menu-driven programming and automatic leakage/temperature compensation. Vent enables purge gas to exit enclosure while providing seal when enclosure is pressurized. Read More

Fluid & Gas Flow Equipment, Controls & Controllers, Mechanical Power Transmission

Volume Boosters provide flow capacity of up to 400 scfm.

September 4, 2014

Equipped with integral adjustable bypass valve, soft valve seat design, and 2 gauge ports, aluminum Type-6500 and 316 stainless steel Type-6600 increase stroking speed in valve actuation system applications requiring high flow capacity or remote pressure control. Products handle up to 250 psig supply pressure and deliver output pressure up to 150 psig. Exhaust port (¾ in. NPT) relieves 100 scfm at 5 psig above setpoint, and supply pressure effect is 0.3 psig for 100 psig change. Read More

Test & Measuring Instruments, Fluid & Gas Flow Equipment, Controls & Controllers, Sensors, Monitors & Transducers

Miniature Water Pressure Regulator serves potable applications.

September 3, 2014

Designed for OEM equipment used in potable (drinkable) water and food contact systems, Type-870 is built with molded rubber supply valve, NSF electrodeposited chromium plated zinc body, FDA approved acetal bonnet and valve seat, food grade nitrile/nylon diaphragm and O-ring, and lead-free brass and food grade nitrile valve plug. Miniature unit, available in 1/8 or ¼ in. NPT and BSP porting, uses diaphragm-operated design and has 2.2 gal/min flow capacity. Max supply pressure is 150 psig. Read More

Test & Measuring Instruments, Controls & Controllers, Sensors, Monitors & Transducers

Multi-Gauge Controller displays 10 pressure measurements.

July 9, 2014

Providing pressure measurements from 1,000 Torr to 2 x 10-11 Torr, Model MGC4000 can display measurements from up to 10 different vacuum gauges simultaneously. Instrument can be configured to display up to 6 gauges in single screen or any number of gauges can be assigned to various screens for auto scrolling of display. By specifying number of gauges, set points, and AI/AO they require, customers can configure MGC4000 to exact specifications. Read More

Controls & Controllers

Vacuum Gauge Controllers offer linear analog output.

May 7, 2014

In addition to existing RS232 and dual control set points, DAVC Series can provide linear analog output (voltage or current) for integration of vacuum measurements with PLC or other data acquisition system. Linear outputs include: 0–1 Vdc, 0–5 Vdc, 0–10 Vdc, 0–20 mA, and 4–20 mA making series suitable for many vacuum control automation applications. Read More

Controls & Controllers, Materials & Material Processing

Vacuum Desiccator features space-conserving design.

March 18, 2014

Intended for biology, chemical, and pharm laboratory applications involving moisture removal and preservation of samples, LAB-42010 series will hold full vacuum 29.9 in. Hg at room temperature for 24 hr and remain airtight even if not under vacuum. Design includes flat-top dome, which maximizes interior space; 1/8 in. thick perforated plate; and polypropylene stopcock with PTFE plug that accepts ¼ in. ID tubing and allows controlled entrance of air as to prevent unnecessary turbulence. Read More

Controls & Controllers

Mass Flow/Pressure Controllers have flexible dual-valve design.

January 24, 2014

MCD Series offers user-selectable control modes that allow users to switch between mass flow, volumetric flow, and absolute pressure measurement and control for flexibility during laboratory use. With dedicated inlet valve and dedicated exhaust valve, single unit can control upstream and downstream flows as well as positive pressure or backpressure in both open and closed systems. Full scale mass flow rates are available from ±0.5 sccm to ±3,000 slpm.
Read More

Material Handling & Storage, Controls & Controllers, Mechanical Power Transmission

Linear Actuator meets machine builders' performance requirements.

January 22, 2014

Available in ¾, 1 1/8, and 2 in. bore sizes, Optimax™ Series OSD Pneumatic Thruster Slide offers standard travel lengths from 1–10 in. and features oversized guide shafts for optimal rigidity with minimum deflection. Urethane shock pads on extend and retract directions provide vibrational damping and minimize impact forces, while tool plate for mounting of tooling or other actuators simplifies installation and fosters interchangeability. Read More

Controls & Controllers, Electrical Equipment & Systems

Solid State Switching Controllers provide proportional output.

November 4, 2013

Available in 54 or 70 mm wide frame sizes, Series RGC2P and RGC3P deliver output power in proportion to control input voltage or current as well as external potentiometer. RGC2P Series consists of 3-phase, 2-pole switching devices with 4 current ratings of 15, 25, 40, and 75 A per pole, while RGC3P Series comprises 3-phase, 3-pole switching devices with 3 current ratings of 20, 30,  and 65 A per pole. Optional monitoring feature detects status of mains and load as well as internal controller failure. Read More

Material Handling & Storage, Fluid & Gas Flow Equipment, Controls & Controllers

Dispensing System offers repeatability for all fluid types.

October 21, 2013

By ensuring consistent supply of fluid to pump regardless of reservoir size or fluid level, FPC Fluid Pressure Control Dispensing System eliminates operator interaction and provides uniform fluid dispensing. System can serve as upgrade to installed GPD MAX and DS Series dispense systems and can be added to new system configurations. For benchtop systems or others looking to optimize dispense results, FPC is available as stand-alone controller and hardware set. Read More

Controls & Controllers, Machinery & Machining Tools

Mass Flow Controller aids semiconductor manufacturers.

April 30, 2013

Insensitive to pressure transients, Model GF135 provides real-time integral rate-of-decay flow measurement. Data can be used to optimize accuracy at critical low-flow set points, set up alarm limits for critical performance parameters, and monitor trends for predictive maintenance. With advanced diagnostic capabilities that verify accuracy, check valve leak-by, and monitor sensor drift, semiconductor manufacturers can maintain uniformity in etch profiles and critical dimensions. Read More

Controls & Controllers, Sensors, Monitors & Transducers

Pressure Monitors and Controller increase hospital room safety.

March 20, 2013

Continually measuring room pressure and indicating room conditions, PresSura™ Room Pressure Monitors and Controller promote safety in isolation rooms, operating rooms, and other specialized spaces. Products also help hospitals and engineers comply with ASHRAE, AIA, CDC, and USP standards. Functionality includes options for temperature and humidity measurement inputs as well as multi-room monitoring. All parameters and notifications are displayed on customizable, color touchscreens. Read More

Fluid & Gas Flow Equipment, Controls & Controllers, Mounting & Attaching Products

Digital Valve Controller promotes performance and reliability.

November 21, 2012

Built on linkage-less, non-contact sensor technology, Fisher® FIELDVUE™ DVC6200p PROFIBUS PA digital positioner offers analog output function block for throttling control applications and digital output function block for on/off applications. Controller provides alerts, trends, and diagnostics utilizing PROFIBUS PA to allow for process visibility and control. Setup and calibration, including performance tuning, can be performed locally within minutes. Read More

Test & Measuring Instruments, Controls & Controllers

Temperature/Process PID Controllers feature NEMA 4 front bezel.

October 18, 2012

Equipped with programmable color displays, Series Dpi32 and CNi32 are microprocessor-based 1/32 DIN temperature/process meters and PID controllers with RS-232 and RS-484 serial communications. CNi32 Series features 2 outputs: control, alarm, or retransmission of process variable as well as universal inputs: thermocouple, RTD, process voltage/current. Built-in 24 Vdc excitation is standard on units without DC power or communication options. Read More

Fluid & Gas Flow Equipment, Controls & Controllers

Integrated Valve and Actuator Control eliminates tubing.

September 21, 2012

Combining cylinder, pilot and control valves, position sensors, and speed regulators in single unit, Integrated Valve and Actuator Control eliminates tubing and remote valve islands typical of pneumatic operations. Cleanline version, with switches and valve inside smooth casing, features IP67 rating, making it suitable for operations such as food or beverage handling where frequent washdowns are required. IVAC requires 1 electrical connection and 1 pneumatic connection for operation. Read More

Fluid & Gas Flow Equipment, Controls & Controllers

V Port Modulating Ball Valves achieve precision process control.

September 21, 2012

Designed for pressure, temperature, flow, and level control, V Series features bodies of carbon or stainless steel with NPT, Socket Weld, Tri-Clamp, and 150 or 300 lb Flanged end connections. Sizes range from ½–8 in., and control signal options include 4–20 mA and 3–15 psi. Characterized to meet custom flow requirements, valves also feature rotary stem that makes series suited for throttling applications; throttling component is constructed from solid stainless steel ball. Read More