|
|
Advertisement
|
|
Controls & Controllers ->
Other Controls & Controllers
Other Controls & Controllers
(Showing headlines 101 - 120) << 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 ...
|
 Analog Inspection PLC Module samples inputs every 25 µsec.Advanced Micro Controls, Inc.
Terryville, CT 06786
Oct 12, 2007
Model 5274 takes analog samples at known points, and compares measured analog values to pre-programmed profile to determine if tested part passed/failed. ControlLogix High Speed Analog Inspection PLC module features digital outputs that can be programmed to indicate error. It allows process improvement by reporting statistical information of each inspection cycle to PLC, and reports Coordinated System Time (CST) at beginning of each measurement cycle.
|
 Remote Controllers suit safety-relevant applications.SICK, Inc.
Minneapolis, MN 55438
Oct 09, 2007
Featuring IP67 enclosure rating, Models UE4457 and UE4427 can be mounted on machine using quick-disconnect technology. Remote I/O devices feature 6 dual channel safety-capable inputs that may also function as single-channel inputs, 12 test/signal outputs, and 2 bipolar safety-capable outputs. In addition, Model UE4457 also supports 2 safety data link connections that can be used in conjunction with intelligent safety products.
|
Force-Feed Controller moves runners into cutting system.Size Reduction Specialists, Corp. (SRS)
East Lansing, MI 48823
Oct 09, 2007
SRS Bridge-Buster force-feed control system moves large runners into 2-stage cutting system from within hopper. System eliminates down-time problems associated with feeding large runners into automated regrind cutting system as well as down-time due to bridging problems. Nylon slides are included on ram and same granulator can be used for both large and small runners.
|
 SCCS Solution helps ensure safety system uniformity.ICS Triplex
Maldon Essex CM9 4LA United Kingdom
Oct 03, 2007
Designed for oil and gas industry, AADvance Safety and Critical Control Systems (SCCS) enables users to operate and update entire plant-wide safety systems from one access point. Combined hardware and software solution delivers flexibility and scalability through its distributed nature, which consists of modular controller hardware situated close to plant it protects. Solution also helps minimize use of heavy cabling and installation time.
|
Controller enables single-axis dynamic fatigue testing.ADMET
Norwood, MA 02062
Oct 01, 2007
ADMET Quattro is multichannel single-axis digital controller for dynamic fatigue testing that is optimized for cyclic testing up to 30 Hz. Windows-based application includes tab-based user interface that allows programming of unlimited number of complete test routines. Utilizing embedded 32-bit high-speed ARM processor for data acquisition and control, software features digital PID filter for control of ramp and hold, sawtooth, sine, and square wave profiles.
|
COTS LCD Controllers suit military and industrial uses.Digital View, Inc.
Morgan Hill, CA 95037
Sep 24, 2007
Equipped with DVI and ARGB inputs, HE-1400 Series supports LVDS and TTL panels, and is capable of supporting 4:3 format panels at up to SXGA resolution and 6:9 panels at up to WXGA resolution. Fully buffered, multi-sync HE-1600 Series provides direct analog and digital connection to TFT panels up to UXGA resolution. Both controllers feature 12 Vdc ±25% power supplies, Mil-spec silicon resin conformal coatings, and laboratory-certified operating temperature of -40 to +80ŗC.
|
Radio Remote Control System suits loader operations.Bobcat Company
West Fargo, ND 58078
Sep 19, 2007
Bobcat® loader radio remote control system enhances capabilities of Bobcat skid-steer and compact track loaders with selectable joystick controls and Bobcat all-wheel steer loaders. Operators can start loader engine and operate drive, lift, tilt, and auxiliary hydraulic functions remotely from up to 1,500 ft. Battery-powered unit can work for up to 15 hr, supports up to 6.2 mph operation loader travel speed, and features transmitter tilt sensor transmitter guard bar.
|
 Motor Control replaces hydraulic motors and actuators.Sevcon, Inc.
Burlington, MA 01803
Sep 18, 2007
Combining fly-by-wire electronic controller, brushless DC motor, and 2-stage planetary gearbox, Integrated Motor Control covers operating voltages from 24-48 Vdc, provides 35-235 Nm peak torque, and uses CANopen communications protocol. Gearbox uses straight and helical gears and is fully greased for quiet operation. Measuring 7.3 x 3.2 x 5.4 in., control can open and close hoppers, valves, and other equipment; steer AGVs, fork trucks, and powerboats; and raise and lower antennas.
|
 Viscosity and pH Controller features RS485 communications.Norcross Corp.
Newton, MA 02458 1829
Sep 07, 2007
Norcross MP2000 Viscosity Controller has 60 settings to accommodate solvent- or water-based products. It provides level, field-selectable on/off, or proportion control as well as password protected programming. Capable of displaying in piston time-of-fall seconds, Zahn or Shell Cup seconds, or centipoises, single-loop controller can be recalibrated while operating. It also features sealed keypad NEMA-4X enclosure and high- and low-viscosity alarm outputs.
|
 Controller enables live insertion/removal of mezzanine cards.Linear Technology Corp.
Milpitas, CA 95035-7417
Aug 30, 2007
Suited for AdvancedTCA carrier blades, MicroTCA systems, or proprietary network platforms, LTC4223 dual supply Hot Swap(TM) controller provides independently controlled turn-on and shutdown of 12 V main and 3.3 V auxiliary supply rails. Fault output alerts host processor if overcurrent fault has occurred on either supply and VCC pin decouples IC supply from faults on 3.3 V rail. Gate-source clamp protects external MOSFET from hard shorts on output.
|
Frequency Converter features plug-and-play functionality.Vectron International
Hudson, NH 03051
Aug 29, 2007
Leveraging integrated crystal-based phase locked loop circuit, C3430 FCXO enables users to convert one input frequency into up to 4 independent output frequencies to facilitate clock distribution. Unit offers output frequencies up to 700 MHz, with jitter of less than 0.20 ps rms across 12 kHz to 20 MHz and less than 0.70 ps rms across 10 Hz to 100 kHz. Featuring surface mount design, RoHS-compliant device is housed in 13 x 20 mm package with 3.3 and 5 V supply voltage.
|
Overvoltage Protection Controllers have integrated nFET.Maxim Integrated Products
Sunnyvale, CA 94086
Aug 29, 2007
Supplied in 2 x 2 mm 8-pin µDFN package, MAX4943-MAX4946/MAX4949 devices implement battery charging from wall adapter while providing overvoltage protection up to +28 V. Products integrate nFET switch and provide overvoltage trip levels from 4.56-8.9 V as well as undervoltage trip levels from 2.45-4.15 V. Along with thermal-shutdown protection and 1.7 A (typ) current-limiting function, additional features include FLAG signal, ±15 kV ESD protection, and 30 ms startup delay/retry times.
|
Remote Automation Controller uses Smart Wireless technology.Emerson Process Management
Austin, TX 78754
Aug 22, 2007
With native communications capability for integration of wireless field networks, ROC800-Series Remote Operations Controller promotes remote asset management as well as maintenance efficiency. Centralized access helps users enhance safety and minimize risk of dangerous environments. Allowing communication with instrumentation at wellheads, pipelines, and other remote sites, product extends predictive intelligence of PlantWeb® digital architecture into remote oil and gas locations.
|
SATA RAID features 5 TB capacity.LaCie USA
Hillsboro, OR 97124
Aug 21, 2007
Designed for digital content creation applications, 5-disk Biggest S2S features eSATA 3 Gbps interface and direct eSATA-to-SATA connection. It is capable of burst transfer rates over 200 MBps, and up to 4 S2S units can be connected on included eSATA PCI-X/Express Card to achieve 20 TB solution with burst speed over 600 MBps for HD multi-stream support. In RAID 0, eSATA interface offers enough speed to edit hours of 10-bit HD uncompressed or play back up to six 8-bit SD video streams.
|
Generator Protection System uses Synchrophasor technology.GE Multilin
Markham, ON L6E1B3 Canada
Aug 13, 2007
Designed to protect and control medium to large-sized ac generators, Model G60 supports Synchrophasor technology, which allows power providers to monitor how instabilities are affecting points of generation. Measurements are updated every 16.67 ms, providing critical recording of power system disturbances. Accumulated Over/Under frequency protection monitors amount of time generator has been running at off-nominal frequencies and triggers alarms indicating maintenance is required.
|
Fault Simulation Modules handle low density applications.Pickering Interfaces
Wobum, MA 01801
Aug 01, 2007
Family of 40-19X modules integrate switching required for hardware-in-the-loop fault simulation into compact PXI modules. Model 40-190 for automotive applications permits 64 controller connections to be connected to up to 8 different fault conditions. Model 40-195 supports 22 channels of 2 wire connections and permits channels to be opened, shorted together, or connected to user supplied fault, while Model 40-196 is 10 bank design that supports 5 A hot/cold switching.
|
Wireless Remote controls Powerpoint/Keynote presentations.Keyspan Div., InnoSys Inc.
Richmond, CA 94806
Jul 30, 2007
Powered by AAA batteries, Presentation Remote Pro utilizes 2.4 GHz RF signal that works through walls and furniture to control Microsoft PowerPoint and Apple Keynote presentation software. Solution is effective over 100+ ft range and includes laser pointer, mouse, and audio controls. Suited for public speakers and presenters, unit offers screen dimming function and USB plug-and-play functionality.
|
ECC Solution facilitates NAND Flash migration.Denali Software Inc.
Palo Alto, CA 94301
Jul 30, 2007
Used by hardware engineers in deploying NAND Flash-based systems, high-speed BCH Error Correction Code (ECC) technology addresses issues associated with SLC and MLC NAND. Layer built on top of Bose, Ray-Chaudhuri, Hocquenghem (BCH) algorithm addresses quality issues when moving to multi-bit cells. Part of Databahn(TM) Flash Controller IP for developing NAND solutions, Flash memory controller provides compiler options that allow for bit width, chip select, and buffering flexibility.
|
 PWM Control ICs work with synchronous buck DC/DC converters.International Rectifier Corp.
El Segundo, CA 90245
Jul 27, 2007
Used in networking, computing, and communications systems, IR3622MPbF and IR3622AMPbF are dual-channel synchronous buck control ICs intended for use as integrated drivers for medium- to high-current point-of-load buck converters. Products can be configured to single output in current share mode, capable of delivering up to 80 A or 2 independent outputs that run 180° out of phase. While IR3622MPbF targets 12 V single-input applications, IR3622AMPbF supports 5 and 12 V applications.
|
 Radio Remote Control is constructed with full metal jacket.Cattron-Theimeg, Inc.
Sharpsville, PA 16150 1198
Jul 26, 2007
Operating on 902-928 MHz band for North/South America, MKU Radio Remote Control system includes Metal Keypad-U operator control unit and industrial-grade, mil-spec digital components. Removable contactless RFID key, Transkey, is programmed with all necessary system configuration. Other features include parameter selection, power-on self-diagnostics, and keypad audible feedback. System employs sealed silicon elastomer switch types and clear, epoxy-coated, dual-step pushbuttons.
|
(Showing headlines 101 - 120) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
|
|
|