|
|
Advertisement
|
|
Controls & Controllers ->
Operator Interfaces & Panels ->
Operator Consoles & Stations ->
Alarm Panels
Alarm Panels
(Showing headlines 1 - 20) more ....
|
 Fire Alarm Control Panels utilize intelligent sensing.NOTIFIER Fire Systems
Northford, CT 06472
Jun 03, 2008
ONYX Series, comprised of NFS-640 and NFS-3030, is available with ONYX Intelligent Sensing to promote response speed and accuracy. Delivering intelligent response to incipient fire signatures while minimizing nuisance alarms, technologies include cooperative sensing, supervisory smoke, detector sensitivity adjust, maintenance warnings, and pre-alarm. Data from multiple sensors is analyzed so that panels can verify uniform smoke spread over distances to identify true fire conditions.
|
 Communications Panel offers network-focused software.Digital Monitoring Products
Springfield, MO 65803
May 08, 2008
Featuring true network/cellular communications approach, XR100/XR500 Command Processor(TM) Panel v200 offers capabilities that help create stronger, multi-layered panel communications that ensure constant link between panel and Central Station. Users can create, configure, and manage up to 8 communication paths, identifiable as primary or backup, and Adaptive(TM) Technology directs panel to make seamless transition from one communications path to another if current path becomes unavailable.
|
Expansion Card provides digital cellular link for DMP panel.Digital Monitoring Products
Springfield, MO 65803
Feb 21, 2008
Installed between panel and any DMP Central Station, 463G Digital Cellular Communicator provides one-step method for establishing wireless communications path as primary link or backup. Expansion card for DMP XR500 panel creates full 2-way IP communication between panel and DMP SCS-1R receiver. Installed inside XR500 enclosure and powered by panel, solution does not require additional enclosures or support equipment aside from antenna connection.
|
Receivers support up to 500 wireless transmitters.Digital Monitoring Products
Springfield, MO 65803
Feb 12, 2008
Equipped in compact unit suitable for residential and small commercial security installations, in-line receivers, models 1100DI and 1100XI allow for wireless capability. Suitable for harsh RF environments, high power receivers, models 1100DH and 1100XH increase coverage by offering greater transmission and higher sensitivity for reliable performance in industrial locations. Models provide two-way, supervised communication using 900 MHz frequency hopping spread-spectrum technology.
|
 Fire Alarm Control Panel offers digital communication.Silent Knight
Maple Grove, MN 55369 4927
Nov 12, 2007
Supporting up to 127 addressable devices, IntelliKnight 5808 allows user to pinpoint which device has been activated and/or needs attention. Built-in digital communication allows reporting of all system activity to remote monitoring location. Panel uses drift compensation, maintenance alert, and distributed power scheme to facilitate installation and minimize wiring requirements. Complying with UL-9th Edition requirements, 5808 FACP offers battery charging circuit integrity testing.
|
 Fire Alarm Control Panels include voice evacuation system.Silent Knight
Maple Grove, MN 55369 4927
Jun 26, 2007
Listed to UL 9th edition standards, Farenhyt IFP-100VIP and IFP-1000VIP have onboard support for over 100 addressable devices and can be expanded to support up to 1,016 addressable devices. Units include single button reset and silence functions, built-in digital communicator, programmable zone or point reporting capability, integrated dead-front cabinet, and 6 A/24 Vdc power supply. Programming is via onboard user interface or SKSS PC-based programming software.
|
 Fire Alarm Control Panel is UL 864 Ninth Edition-listed.NOTIFIER Fire Systems
Northford, CT 06472
Apr 30, 2007
Engineered for medium-sized applications, modular NFS2-640 comes with multiple display options and one Signaling Line Circuit, expandable to 2. Panel supports up to 636 intelligent devices and has 4 Notification Appliance Circuits with built-in synchronization protocol for System Sensor, Wheelock, and Gentex horns, strobes, and horn/strobes. Using FlashScan® polling protocol and ONYX Intelligent Sensing technology, scalable product optimizes response to smoke and heat conditions.
|
Alarm Control Panel offers digital wireless back up option.Numerex Corp.
Atlanta, GA 30339
Jan 26, 2007
DMP XR500 integrated intrusion, fire, and access control panel with optional digital cellular backup is powered by Numerex Networks(TM). Solution includes Uplink AnyNET-DMP communications device to provide instant notification and uninterrupted alarm communications to central stations in event of phone-line outage or Internet service interruption. Along with web-based administration, solution also features automated testing capabilities.
|
 Addressable Control Panel comes with built-in communicator.Fire-Lite Alarms
Northford, CT 06472 1653
Nov 01, 2006
Combining capabilities of fire alarm control panel and digital alarm communicator/transmitter, Model MS-9050UD provides complete fire control system for child care, auditoriums, theaters, and restaurants. With capacity of 50 addressable devices, it offers single addressable SLC loop and 2 onboard Notification Appliance Circuits. Additional features include 2 programmable relays, one fixed trouble relay, built-in programmer, and telephone line active LEDs.
|
 Fire Alarm Control Panel includes built-in communicator.Fire-Lite Alarms
Northford, CT 06472 1653
Jul 21, 2006
Combining capabilities of FACP and DACT into one circuit board, addressable Model MS-9200UDLS features LiteSpeed(TM) speed Signaling Line Circuit protocol, which simultaneously polls 10 devices, enabling fully loaded panel to report incident and activate notification circuits in less than 10 sec. Panel also includes LED graphic and LCD annunciators, reverse polarity/city box transmitter, local and remote upload/download software, and remote power expansion.
|
Fire Alarm Controls include Intelligent Device Protocol.Silent Knight
Maple Grove, MN 55369 4927
May 19, 2006
Designed to optimize control, Farenhyt 50-point IFP-50, 127-point IFP-100, and 1,000-point IFP-1000 control panels include Intelligent Device Protocol to protect buildings and small to mid-sized institutions. Protocol allows use of duct detectors and wide array of multi-input/output modules and sensors.
|
 Fire Alarm Panels conform to UL standards.Silent Knight
Maple Grove, MN 55369 4927
Apr 06, 2006
Comprised of IFP-50/100/1000 and VIP models, IFP Series supports synchronization of System Sensor A/V appliances in addition to Gentex, Wheelock, and Hochiki products. It provides USB port for laptop computer compatibility and promotes accelerated upload/download rates via KnightLink data compression software. Series also includes IFP-Net Fire System Manager, a PC-based system that monitors and graphically displays status of fire control panels.
|
 Voice Alarm System includes fireman's panel.Bosch Security Systems
Fairport, NY 14450 9199
Oct 25, 2005
EVAC-compliant Plena Voice Alarm System features 19 in. remote control panels, remote control kits for customized solutions, and inductive-loop amplifier for hearing-aid user assistance. Enabling alarm system to be located in fire-resistant cabinet, remote panels duplicate controls and indicators on central controller and routers and allow for control from up to 1,000 m. Fireman's panel features large, illuminated buttons for all-call functionality.
|
 Interactive System provides navigation tool for firefighters.NOTIFIER Fire Systems
Northford, CT 06472
Oct 13, 2005
ONYX FIRSTVISION wayfinding navigational tool helps firefighters and emergency responders identify fire origin and migration, building hazards, and exit routes. Able to facilitate execution of response operations, system employs PC-based touch screen that graphically displays critical information. Interactive display summarizes building floor plans, with location of fire alarms, water supplies, access routes, fire barriers, and gas, power, and HVAC shutoffs.
|
Vibration Alarm offers adjustable hysteresis and delays.Wilcoxon Research, Inc.
Germantown, MD 20876
Apr 21, 2005
DIN-rail mount iT 401 Alarm offers front panel LED readout, push button controls, and 3 programmable relays for vibration monitoring or process control. It operates with any 4-20 mA signal input directly from loop-powered sensor or vibration transmitter that converts accelerometer signals to 4-20 mA data. Used as part of condition based monitoring system or or connected directly to plant PLC or DCS, unit can directly operate smaller motors and valves.
|
 Alarm Panel monitors 4 to 24 stations.BinMaster
Lincoln, NE 68529
Dec 01, 2004 Point Level Alarm Panel monitors level of multiple bins or tanks from one location. Through number of strategically placed level indicators, operator can tell when bin is full, partially full, or empty. Eye catching signal light and buzzer indicate exact level of material. Modules on alarm panel can also be interconnected to signal external common alarm. |
 Fire Alarm Control Panel is suited for small buildings.NOTIFIER Fire Systems
Northford, CT 06472
Sep 28, 2004 With capacity of up to 198 addressable NOTIFIER devices, intelligent FireWarden 100â„¢ features smoke detection capabilities and auto-programming. Single-loop panel suits applications that require flexibility of individual software zone mapping. Auto detector testing, drift compensation, maintenance alert, and auto device type verification offer maintenance and troubleshooting capabilities. Unit also includes remote upload/download communicator. |
 Alarm Control Panel features LCD keypad.Digital Monitoring Products
Springfield, MO 65803
Sep 21, 2004
Series 7000 keypad provides 4 onboard fully programmable zones,integrated proximity reader, door access relay, and codeless arming and disarming. LCD display delivers sharp, clear text feedback for proper system operation. A digital interface is provided for applications of all sizes. Unit adapts to company's standard backbox for upgrading.
|
 Fire Alarm Control Panel supports up to 127 devices.Silent Knight
Maple Grove, MN 55369 4927
Jun 15, 2004 IntelliKnight 5808 FACP offers built-in digital communication that allows reporting of all system activity to remote monitoring location. Unit supports up to 127 addressable devices that allow user to pin-point device that has been activated and/or needs attention. Drift compensation, maintenance alert, and distributed power scheme simplify installation and reduce wiring requirements.
Built-in RS-232 interface for programming to PC is also available. |
 Fire Control Panel supports 50 analog addressable modules.Silent Knight
Maple Grove, MN 55369 4927
Jun 02, 2004 Model IFP-50 intelligent analog/addressable fire control panel features 2 notification appliance circuits that can be programmed for notification outputs or auxiliary power. Any combination of addressable devices can be used on single SLC loop. Built-in, dual-line, digital fire communicator provides remote reporting of system activity and system programming. Panel also includes Form C trouble relay, 2 programmable Form C relays, and pre-trouble maintenance alert. |
(Showing headlines 1 - 20) more ....
|
Latest Products in the News |
Digital Monitoring Products - March 2, 2007 DMP 1142 Wireless Two-button Transmitter Receives UL Holdup Alarm Listing
Digital Monitoring Products - February 23, 2007 DMP Announces Breakthrough False-Alarm Prevention Feature
More Products in the News...
|
|
|