Controls & Controllers ->
Engine & Motor Controls & Controllers ->
Motor Systems Controls|
Motor Systems Controls
(Showing headlines 511 - 530) << 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 ...
Servo Drivers update 100 drives in under 100 µsec.
Copley Controls Corp.
Canton, MA 02021
Jun 07, 2007
Models AEP-90-18 and AEP-90-36 open standard EtherCAT-compatible Accelnet servo drives for brushless and brush motors deliver 18 and 36 A peak, respectively. Running on 20-90 Vdc power, operating modes include torque, velocity, trajectory tracking, point-to-point, and homing. Drives come equipped with Endat 2.2, Hiperface, incremental, and analog encoder feedback options. Interfaces include two 100BASE-TX ports, analog ±10V inputs, and digital inputs and outputs.
Frequency Converters feature power range of 0.25-7.5 kW.
Bosch Rexroth Corp., Corporate Headquarters
Hoffman Estates, IL 60192-3707
Jun 06, 2007
Suited for drive requirements using 3-phase induction motors, IndraDrive Fc devices can be installed without PC using 2 different operator modules. Standard Model supports parameter-focused operation, while Deluxe model's start-up has 6-language clear text display with no need for documentation. Units operate in linear V/f characteristic curve or sensor-less current vector control modes, and come in 4 different sizes and voltages of 200-230 and 400-480 V with 0-400 Hz output frequency.
Pump Drive comes in capacities of up to 3,000 hp.
Cotta Transmission Co., LLC
Beloit, WI 53511
Jun 06, 2007
Designed for use in extreme conditions, Model PD2266 heavy-duty pump drive can operate wide range of driven applications. It can be designed with 4-8 pump stations, and input horsepower can be divided unequally between stations (maximum 1,800 hp per station), totaling 3,000 hp for unit. Additionally, product's modular approach allows for SAE, DIN, or custom pump interface on any of unit stations.
Motor Controller suits low voltage motors.
Markham, ON L6E1B3 Canada
Jun 06, 2007
Available in compact and rugged design, Model MM300 offers protection, control automation, metering, communications and advanced diagnostics. It can simultaneously communicate using Modbus (Serial or Ethernet) and either DeviceNet or Profibus DP protocols. Continuous monitoring coupled with single-click access to device and system status information can alert operators to potential conditions that could lead to critical process interruption.
Variable Frequency Drives are offered in 75-100 hp range.
Danfoss VLT Drives
Loves Park, IL 61111
Jun 05, 2007
VLT® AutomationDrive VFDs are available in 75-100 hp range at 380-480/500 Vac, which covers NEMA 1 and 12 rated enclosures. Used to monitor, analyze, and control production, they can be programmed to adapt to operations at various points in line with built-in Smart Logic Controller or optional MCO PLC. Controller enables drive, motor, and application to work together through preprogrammed chain of events or by monitoring peripheral devices.
Microstepping Driver controls size 23 to 42 motors.
Intelligent Motion Systems, Inc.
Marlborough, CT 06447-1334
Jun 05, 2007
With input voltage of 12-75 Vdc, MForce PowerDrive delivers per-phase output current of 7 A peak, 5 A RMS, with optional programmable motion controller or variable speed controller. Enclosed package also includes integrated heat sink and pluggable, locking connectors. Operating from -40 to +85°C, driver accepts up to 20 resolution settings from full to 256 microsteps/full step, with CANopen communications optional. Interface cables speed prototyping, parameter setup, and configuration.
AC Vector Drives offer NEMA 4X enclosure option.
AC Technology Corp.
Uxbridge, MA 01569 2001
Jun 05, 2007
Suitable for food and beverage industries, SMVector Drives with NEMA 4X enclosure are protected against foreign objects such as dust, as well as harmful effects of water and corrosion. Units offer input voltage ranges from 120 Vac, 1-phase to 600 Vac, 3-phase with RS-485/Modbus, CANopen, and DeviceNet communication options. NEMA4 enclosure options are available with up to 3 hp ratings.
AC Drives provide variable frequency motor control.
Milwaukee, WI 53204
May 25, 2007
Suited for new and retrofit applications, PowerFlex 4M AC Drives feature DIN rail mounting and feed-through wiring to facilitate installation. Units offer power ratings from 0.25-15 hp and voltage classes of 120, 240, and 480 V. Available in 3 frame sizes, all drives feature Zero-Stacking, which eliminates space between drives in applications with ambient temperatures up to 40°C. Integral RS485 communications enable use in multidrop network configuration.
Successive-Approximation ADCs facilitate motor control.
Analog Devices, Inc.
Norwood, MA 02062-9106
May 18, 2007
Providing direct interface for multiple types of sensors, AD7264/2 allows single, standardized DAQ board to be used in industrial motor drives. Solution integrates 2 successive-approximation ADCs, one programmable gain amplifier, and 4 comparators on one chip. While each ADC provides 1 MSPS max throughput, on-chip PGA accepts true differential analog input and supports 13 programmable-gain settings from 1-128. Solution operates with 5 V power supply and consumes 24 mA.
Quad-Axis Step Motor Controller features USB interface.
Lombard, IL 60148
May 17, 2007
Designed for use with external step and direction/full or half step drives, US-20USB includes encoder support for each of 4 axes; embedded interpreter for CyberVec(TM) step motor system control language; and auxiliary RS-232 interface. Latter can be used in place of USB port and/or as multi-drop link to as many as 15 additional HS-20USB systems. Also included, auxiliary digital and analog I/O can be configured for joystick and/or control panel interface support.
Vector Drive offers power range up to 25 hp.
LEESON Electric Corp.
Grafton, WI 53024-0241
May 11, 2007
Designed for operation with vector duty rated induction motors, SM2 Series FLUX VECTOR(TM) Drive features auto tuning, dynamic speed regulation, and 4 modes of operation, including V/Hz, Enhanced V/Hz, Vector Speed, and Torque. Unit is rated for input voltages of 120, 230, 400, 460, or 575 Vac from 0-240 Hz. Housed in NEMA1/IP21 enclosure, drive is suited for packaging machinery, food processing machinery, material handling/conveying systems, and HVAC systems.
Speed Controller is designed for brushless DC motors.
Maxon Precision Motors
Fall River, MA 02720
May 10, 2007
With digital signal processing and 5-24 V operating voltage, DEC 24/3 one-quadrant amplifier is suited for various drive tasks and features max output power values of 3 A (continuous) and 6 A (intermittent). Input range allows operation as digital speed controller and open loop speed controller; required operating mode can be selected via DIP switch, and speed value can be set via integrated potentiometer or external reference value. Other control inputs are also available.
Motor Controllers come in 45 and 90 mm wide sizes.
Carlo GAVAZZI Automation Components
Buffalo Grove, IL 60089
May 07, 2007
Offering motor control capacity ranging from 1.5 hp at 220 Vac to 40 hp at 600 Vac, RSHR MIDI Series, and RSHR and RSHP Flexy POWER Series soft start/stop motor controllers enable starting and stopping of 3-phase asynchronous motors with 3-wire connection. Providing up to 275 starts/hr, 45 mm wide RSHR MIDI Series controls motors up to 18 A, while 90 mm wide RSHR and RSHP Flexy POWER Series provide 50 starts/hr for control of motors up to 45 A.
Variable Frequency Drive controls AC motors up to 3 hp.
Danfoss VLT Drives
Loves Park, IL 61111
May 01, 2007
VLT® Micro Drive offers side-by-side mounting without any de-rating, heat management and coated electronics, ability to copy settings via local control panel, and IP20 protection. It features automatic energy optimizer function, automatic motor adaptation, electronic thermal relay, and logic controller. Compact 2.75 x 6 x 6 in. unit comes in single-phase 200-240 Vac 0.25-2 hp, 3-phase 200-240 Vac 1/3-2 hp, and 3-phase 380-480 Vac 0.5-3 hp configurations.
Intelligent Motor Driver offers adjustable parameters.
Vernon Hills, IL 60061
Apr 24, 2007
Operating from 20-35 Vdc, MD2U-ID20 Series 2-phase stepping motor driver is eligible for synchronous operation of 2 motors in parallel and high-torque/low-speed drive. Intelligent, unipolar constant current pentagon driver offers selectable run speed. Acceleration and deceleration time, as well as other parameters, are adjustable via switches. Microstep operation allows minimal vibration and optimal motion control.
Servo Motor Controller features sample rates to 20 kHz.
Richmond, CA 94806-1950
Apr 13, 2007
Intended for up to 100 W brush motors with quadrature encoders, 3C20 digital motion controller includes 30 MIPS, 16-bit DSP coupled with 100 W Hbridge on single 2 x 2 in. card. This single-axis dc servo motor controller/amplifier features profile generator with built-in trapezoidal profile capability. Position, velocity, and acceleration/jerk parameters all have 32-bit or greater precision. Dual FIFO buffered interface allows real-time and queued commands to proceed simultaneously.
Low Voltage Motor Control offers centralized intelligence.
Palatine, IL 60067-7399
Apr 12, 2007
Addressing power and process control needs, Square D® Model 6 Low Voltage Motor Control Center includes Square D Masterpact® circuit breakers and Powerpact® electronic motor circuit protector to guard against arc flash incidents. Other components, such as Telemecanique® Altivar® AC drives and Motor Logic® Plus/II solid state overload relays, can communicate directly with network protocols such as Modbus®, PROFIBUS, and DeviceNet for real-time monitoring of critical data.
Speed Control Package complies with RoHS regulations.
Oriental Motor U.S.A. Corp.
Torrance, CA 90502
Apr 05, 2007
Comprised of brushless dc motor and 24 Vdc compact driver board, BLH speed control package includes 15/30/50/100 W output models with ±0.5% speed regulation accuracy. Motor can be operated at speeds from 100-3,000 rpm, and available gearhead types include parallel shaft and hollow shaft flat versions. While 15 W parallel shaft gearhead with BLH motor cannot be separated, packages for 30, 50, and 100 W models are supplied in packages available separately to facilitate changes/repairs.
Stepper Motor Control Card meets needs of complex systems.
ADLINK Technology Inc.
Irvine, CA 92618
Apr 04, 2007
Equipped with 4 pulse output channels, 4-axis PCI-8144 delivers pulse rates up to 2.4 MHz and offers precise synchronization across all axes to ensure simultaneous starts and stops needed for accurate motion of complex systems. Solution also features hardware-based emergency stop control and supports on-the-fly speed changes necessary for CNC machining automation. Support is also provided for T- and S-curve speed profiles as well as unsymmetrical acceleration and deceleration.
Serco Drives are built to survive environmental extremes.
Elmo Motion Control, Inc.
Westford, MA 01886
Mar 30, 2007
Comprised of intelligent digital servo drives and analog servo amplifiers, ExtrIQ series operates over -40 to +70°C range and withstands humidity, unlimited altitude, vibration levels over 15G, and mechanical shock. Products are based on SimplIQ technology, which provides feedback options, programming capabilities, communications protocols, and fully digital motion controller. In operating voltage range of 10-200 V, power densities range from 10 W to 9 kW.
(Showing headlines 511 - 530) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49