Interroll Automation
Jeffersonville, IN 47130
Apr 24, 2008 Developed for pushback storage systems with LIFO (last-in, first-out) roller tracks, LIFO Speed Control System operates without resistance during storage process and only transfers its brake force to pallets to be unloaded. Design enables accelerated retrofit for replacement of conventional speed controllers. Suited for applications that feature deep insertion channels, product helps increase safety by automatically controlling speed of pallet descent down lane.

Oriental Motor U.S.A. Corp.
Torrance, CA 90502
Mar 20, 2008 Equipped with built-in digital display, RoHS-compliant Models FE100/FE200 provide 200-2,400 rpm speed range that can be set through speed knob on front of controller box as well as external 0-10 Vdc source. Model FE100 delivers 6-90 W output, while Model FE200 extends power level from 25-200 W. With acceleration/deceleration time settings from 0.1-30 sec, controllers can drive 3-phase, fractional horsepower, ac induction motors.

ICM Controls
Cicero, NY 13039
Dec 06, 2007 Used to protect AC/refrigeration systems, models ICM325/326/327HN are temperature-sensitive, motor fan speed controls that regulate head pressure by varying amount of airflow through condenser. Products run motor fan consistently at lower speed, rather than cycling it on or off, and continuously make any necessary temperature adjustments. Suited for temperature- and humidity-sensitive environments, each model can control up to 3 refrigerant circuits.

Dart Controls, Inc.
Zionsville, IN 46077
Nov 21, 2007 Utilizing zero-speed detect and solid state dynamic braking circuits, 130 Series eliminates contact arcing and failed braking problems. In event of power loss or emergency stop condition, control will drop into dynamic brake condition to safely bring motor to stop and remain there until power is reapplied and run condition is recognized. Compliant with RoHS, control fits industry standard footprint for both vertical and horizontal mounting.

Keytroller Inc.
Tampa, FL 33614
Nov 16, 2007 Designed for Toyota, Cat, Mitsubishi, Nissan, Doosan, and Komatsu lift trucks, plug-and-play N-Series TIRE-SAVER also extends tire life on forklifts by not allowing directional change if vehicle speed or engine rpm is above setpoint. Kit consists of controller module to set speed and engine rpm threshold, controller module to fool vehicle management system computer, wire harness to connect to alternator, and wire harness to connect to directional solenoids.

Intelligent Motion Systems, Inc.
Marlborough, CT 06447-1334
Oct 31, 2007 Accepting 12-75 Vdc input, MDrive34Plus² Variable Speed Control combines NEMA size 34 brushless 1.8° motor, driver, and encoder. Unit includes programmable oscillator along with parameter setup GUI communicating over SPI, and 2 configurable speed control inputs that may be preset and digitally selected. With output frequency up to 5 MHz and extended operating temperature of -40 to +75°C, control provides 3 adjustable modes of operating including voltage, current, and PWM.

Maxon Precision Motors, Inc.
Burlingame, CA 94010 1304
Oct 25, 2007 With input voltage range of 10-50 V, DECS 50/5 drives brushless dc motors without Hall sensors. In continuous operation, output current of 5 A of power stage is permissible, giving unit max output performance of 250 W. Speed value can be set via integrated potentiometer or analog set value, and amplifier can be operated at max speed of 80,000 rpm. Model DECS 50/5 also provides control inputs for selecting motor direction, enable, and braking.

Control Resources, Inc.
Littleton, MA 01460
Sep 24, 2007 SmartFan Fusion-9 controls speed for up to 9 fans based on temperature, single- or dual-I2C interface, or analog control signal (PWM, 5.0 Vdc). Digital unit offers ATCA compliance for managed or intelligent FRU cooling systems and meets telecommunication industry's open standard for carrier-grade systems by communicating with shelf management modules via dual IPMBs. Control provides FRU information, individual fan status, and temperature readings.

Insight Automation, Inc.
Erlanger, KY 41018
Sep 11, 2007 Compatible with Interroll EC100 and EC400 motor drive rollers, ConveyTrax® CRSC controls all devices typically associated with motorized roller conveyor application. It is configurable to control any brand of standard, high-torque, or brake motor and provides modular networked control over products for 24 V zoned accumulation conveyor. From one point, operators can control motor speed, acceleration, and deceleration as well as monitor current draw, actual speed, and performance.

ICM Controls
Cicero, NY 13039
Aug 01, 2007 Suited for residential and small commercial settings, variable frequency/variable voltage CC750 Comfort Control Center controls blower speed in existing air conditioner or heat pump systems, enabling installer to fine-tune key parameters for control of air quality and moisture levels. Lower humidity levels achieved by CC750 protect homes against mold propagation. Available in 115 and 230 Vac models, system also helps minimize fan noise and achieve optimal energy efficiency.

SKF Linear Motion & Precision Technologies
Olney, IL 62450
Dec 11, 2006 Available in 24 Vdc, 120 Vac, and 230 Vac versions, SKF® SCU Smart Control Units can synchronize speeds of up to 6 different actuators and store frequently used positions for quick selection using only one command. They feature standardized plug system, 3 or 6 channels for actuators, and adjustable operating parameters. Single fault safety interrupts or prevents movement of all actuators upon detection of electrical failures of internal and connected hardware.

Dart Controls, Inc.
Zionsville, IN 46077
Nov 30, 2006 Microprocessor-based, digital Model MD10P provides closed-loop speed control for dc motors up to 2 hp. Control is suited for applications requiring long-term accuracy and precise speed control, such as conveyor cooking and drying ovens, as well as augering, mixing, and spraying equipment.

Midwest Motion Products
Watertown, MN 55388
Nov 06, 2006 Featuring reversing switch and speed adjust potentiometer, Model MMP20A-24V-RSP Motor Speed Control Module provides bi-directional, open loop, dc motor speed control. Operating at 24 Vdc, solid state PWM switching device delivers 20 A of continuous current and 240 W output power while peak current of 40 A delivers 480 W output power. IP65 rated product measures 4.5 x 3.1 x 1 in., has two ¼ in. dia thru-holes for mounting, and 4 terminals for connecting to power.

Dart Controls, Inc.
Zionsville, IN 46077
Oct 02, 2006 RoHS-compliant 15 Series DC motor drives, rated for 12/24 Vac or 120/240 Vac input and 2-4 A DC current out, are available as 2 compact panel-mount models and one NEMA 4/12 enclosed model with AC line fuse and power on/off switch. All models are cULus-recognized and carry European CE mark.

ITW Automotive Finishing Group
Toledo, OH 43612
Sep 06, 2006 PulseTrack 2 continuously monitors and maintains programmable speeds of rotary atomizers while also monitoring temperature and humidity for one or more zones. Microprocessor-based system delivers magnetically generated pulse converted to fiber optic signal by module located in each connected rotator assembly. Along with built-in diagnostics and fault detection, product offers quick response with closed loop control and is adaptable to installation requirements.

Dart Controls, Inc.
Zionsville, IN 46077
Feb 07, 2006 Offering adjustable horsepower ranges of 1/50-1/8 and 1/8-½ hp, 120 Vac and 1/25-¼ and ¼-1 hp, 240 Vac, Series 125 includes inhibit circuit for start-stop operation and 1% speed regulation over 50:1 speed range. Installation and field adjustments are facilitated using barrier type terminal strip and trimpots. Controls are suited for office machinery, conveyors, office packaging equipment, printers, process equipment, centrifuges, and exercise equipment.

Delphi
Troy, MI 48098-2815
Dec 15, 2005 Using forward-looking, 76 GHz narrow-beam radar system, Forewarn® Adaptive Cruise Control helps driver maintain selected time gap behind vehicle ahead. At highway speeds, if lane ahead is clear, system will maintain cruising speed set by driver. When slower traffic is detected, system maintains driver-selected headway, adjustable between 1.0-2.2 sec, using throttle control and limited braking. If gap is closing quickly, audible and visual warnings are given.

Midwest Motion Products
Watertown, MN 55388
Dec 09, 2005 Modular, solid-state PWM switching device, Model MMP20A-12V-RSP, provides bi-directional, open-loop speed control and is suited for battery-powered applications requiring adjustable speed of brushed dc motor or gear motor. Fully encapsulated, IP65-rated device provides 20 A continuous current at 12 Vdc, 240 W of continuous output power, peak current of 40 A, and peak output power of 480 W. Speed adjust potentiometer is built-in and pre-wired.

FiveCo
Lausanne 1015  Switzerland
Sep 16, 2005 Providing power from 15-48 V, 10 A, Model FMod-IPECMOT 48/10 encompasses both motor controller and power level. It uses standard Ethernet protocols including TCP-IP, UDP, and HTTP. By using FSoft-MOTORCTRL software, user can configure various parameters and test system simultaneously. Integrated regulator allows for control in position as well as in speed, based on motor's encoder. For brushless motors, Hall sensors can be directly connected to card.

Sprint Electric Ltd
Arundel East Susse BN18 0BE  United Kingdom
Jul 14, 2005 Motor speed controller, 200XLV, drives brushed motors, gear-motors, low-inductance printed motors, and linear actuators rated up to 100 W. Suited for low-power applications that rely on unregulated dc or battery supply up to 48 V, 4-quadrant drive measures 82 x 40 x 50 mm and can motor and brake in both directions of rotation. It produces linear, noise free output and features manually adjustable IR drop compensation and speed ramping function.