Moisture Register Products
La Verne, CA 91750
Nov 08, 2007 Consisting of wall-mounted console, NIR Sensor with power box, or RF sensor with oscillator box, BSP-901 Continuous On-Line System measures moisture from 0-80% ±0.02-0.2% in variety of environments. Single-channel analyzer stores 5 separate 3-point calibration tables for multiple products utilizing nonvolatile battery-backed memory. System reports 7 moisture calculations/sec, while programmable smoothing function minimizes undesired output fluctuations by averaging readings.

Emerson Network Power
St. Louis, MO 63136
Jun 29, 2007 Supporting remote monitoring in real time from any web-enabled computer, Liebert vEM-14 combines environmental monitoring with power management to prevent overheating and power oerload. Rack-mounted unit is equipped with 4 sensor inputs, built-in temperature/humidity sensor, 10 dry-contact points for door switches, clogged filter alarms, and generator alarms, and 2 serial ports for power strips. Compact system allows deployment in 1U of rack space, on wall or desktop.

Eaton Corp.
Cleveland, OH 44114
Mar 20, 2007 Providing continuous monitoring of environmental conditions at rack level, Powerware® Environmental Rack Monitor measures temperature and humidity at 2 locations in rack as well as status of up to 4 additional input contact sensors. Accessible anywhere through standard Web browser, monitor displays real-time status to PC, Internet-ready device, or network management system and automatically notifies designated recipients of out-of-range conditions, via email, PDA, or pager.

Control Co.
Houston, TX 77258 8307
Dec 12, 2006 Featuring remote sensor with 7 ft cable, Traceable® Remote Alarm RH/Temperature Monitor offers humidity range of 20-99% with 1% resolution and temperature range from 58.0-158.0°F and -50.0 to 70.0°C with 0.1° resolution. Alarm may be set in 1% RH and 1° increments and sounds when reading goes above or below set points. Housed in high-impact, chemical-resistant ABS plastic case, monitor includes min/max memory feature and triple display with ½ in. high digits.

ITW Automotive Finishing Group
Toledo, OH 43612
Sep 06, 2006 PulseTrack 2 continuously monitors and maintains programmable speeds of rotary atomizers while also monitoring temperature and humidity for one or more zones. Microprocessor-based system delivers magnetically generated pulse converted to fiber optic signal by module located in each connected rotator assembly. Along with built-in diagnostics and fault detection, product offers quick response with closed loop control and is adaptable to installation requirements.

Selco Products Co.
Anaheim, CA 92805-4842
Aug 11, 2006 Incorporating microprocessor-based technology, Model 2698 delivers ON/OFF cooling control of temperatures from -40 to +50°F, or cooling control of temperatures from -32 to +285°F. Model 2699 provides ON/OFF temperature and humidity control, and features up to 3 outputs with multiple relays, or ability to drive external SSR. Both include 2- or 4-digit push-button display panels, bi-color LED indication, and options for user panel remote control and adjustment of differential.

Munters Corporation / Dehumidification Division
Selma, TX 78154
Apr 27, 2006 Humidity Control Unit (HCU) combines cooling and desiccant dehumidification technologies in one system to control dew point temperatures in hot, humid climates. Delivering dew points below 45°, product removes humidity utilizing packaged refrigeration system in conjunction with active titanium silica gel desiccant wheel. All energy required for regeneration of desiccant wheel is recovered from condenser waste heat. Models include 2,400-3,400 cfm HCU-3000 and 4,000-6,000 cfm HCU-6000.

Laboratory Control Systems, Inc.
Scranton, PA 18508
Jul 19, 2004 With 25 µsec scan rate, 1 Mb Flash memory, and 1 Mb RAM, microprocessor-based Envirotrak® IV controls equipment and processes used to maintain room temperature, pressure, humidity, airflow, or any combination of the above. It supports BACnet, Modbus, LonWorks, and N2 protocols and incorporates up to 48 I/O control points. Product may be programmed to scan each individual point in any sequence without imposing limits on application or number of downloadable graphic programs.

Love Controls
Michigan City, IN 46361
Apr 13, 2004 With relative humidity range of 0–100%, Series HS Humidity Switch provides control for humidifying or dehumidifying applications. It features 9 user-defined parameters including set point, hysteresis, control type, and cycle time. Access to programming parameters can be locked for security purposes using password protection feature, and relative humidity, output status, and error/alarm messaging can be viewed on green LED.

Dri-Steem Humidifier Co.
Eden Prairie, MN 55344
Aug 22, 2003 Designed for use with gas/liquid/steam-to-steam and VAPORSTREAM® electric humidifiers, outdoor enclosures may be installed on ground or roof. Constructed of heavy-duty galvanized steel, products are CSA-certified and incorporate enclosure doors that provide full access to internal components. Fully insulated enclosures operate in temperatures from -40 to +122 °F and offer supplemental heating and cooling systems that maintain required operation conditions.

Azova, Inc.
Akron, OH 44311
Jun 11, 2003 Panel PC System is preprogrammed with temperature and humidity monitoring and control system, and provides touch-screen interface. It is compatible with Series LTM-8000 data acquisition system controllers, which provide up to 128 12-bit input points. Programmable high and low alarms indicate out of range temperature and humidity data. I-Wire® Network technology provides multi-drop systems that can be instantly identified without programming.

Poolpak, Inc.
  
Apr 24, 2003 ECC III Controllers for single- and dual-fan dehumidification systems feature history logging/trending ability that measures performance of unit over extended period. They can perform self-diagnosis of system problems and display results in English. Alarm conditions can be forwarded via telephone or e-mail using built-in call-out capability. ECC III controllers include fully-functional touch screen interface, complete with color graphics.

Drever Co.
Huntingdon Valley, PA 19006
Oct 25, 2002 Atmosphere Humidity Regulator extends furnace belt life by 33% and prevents adherence of stainless steel tubes to each other in heat processing operations where cryogenically produced gases are employed. Unit can be installed in atmosphere piping of existing furnaces.

Azova, Inc.
Akron, OH 44311
Oct 11, 2002 Model LTM-8201C and LTM-8203C provide standalone solutions with up to 32 input points connected on 1 to 3 data lines (Number and configuration of points vary per model). They leverage I-Wire® Network technology to provide multi-drop systems that can be configured without programming. Basic systems consist of panel-mount controller with push-button interface and LED display. They offer RS-485 port and programmable high and low alarms.

Onset Computer Corp.
Bourne, MA 02532
Sep 19, 2002 HOBO® LCD Temp/RH Data Logger accepts external temperature and temperature/RH sensors with cables to permit monitoring condensing environments up to 17 m away from instrument. External Temp/RH sensors are available for operating environments ranging from -40 to +167°F, humidity from 0 to 100%, and intermittent condensing environments to 86°F. Logger can be programmed with high and low limit alarm set points. It operates for one year on alkaline batteries.

Ruska Instrument Corp., A Druck Co.
Houston, TX 77042
Aug 22, 2002 Laboratory Environment Monitor (LEM) monitors barometric pressure, ambient temperature, and relative humidity, and reports to PC via serial interface. Accuracy is 0.08 inHg for barometric pressure, 0.5°C for temperature, and 10% for RH. It comes with LEMCal™ data logging software program to display real time measurements. Software can log results in 1, 5, or 15 min intervals to text file. Up to 8 LEMs can be simultaneously monitored by a single PC.

Eurotherm Controls
Leesburg, VA 20175
Jun 12, 2002 X26 can store 50 programs with up to 100 steps per program. Program profiles can be set up via controller's front panel using iTools or via Windows setpoint program editor. Real-time clock can be set to start programs at defined times of day and/or week. It has boost heat, boost cool, compressor on/off outputs, program holdback to guarantee soak time at proper temperature and humidity, and 6 sets of PID parameters. Options include Modbus® communications.

Metrosonics, Inc.
Rochester, NY 14692 3075
Apr 24, 2002 Model hs-32 WBGT area heat stress monitor measures humidity, temperature, and radiant heat conditions that can cause heat stroke and likewise heat-induced illnesses. With on-board humidity sensor, hs-32 displays relative humidity and calculates Heat Index or Humidex. Other features include covered wet bulb reservoir, shielded dry bulb, removable sensors, and 2 or 6 in. globe. Set-up options include degrees degrees C or F and multilingual display.

Munters Corporation / Systems Division
Fort Myers, FL 33911
Apr 16, 2002 HUMIdek(R) humidifies through direct evaporation of water into air. Through its use of solenoid/flow valves, system delivers precise humidity control. Evaporation media surface also acts as sound attenuator. HUMIdek comes with 4 in. of UL 900 flame rated GLASdek media, which meets NFPA 90A codes.

Munters Corporation / Dehumidification Division
Selma, TX 78154
Mar 19, 2002 HCU desiccant dehumidification system treats 100 percent makeup air and works with existing A/C system or energy recovery ventilator (ERV). It controls humidity on as-needed basis, when humidity or temperature levels exceed set point. System removes humidity using combination of DX cooling and desiccant rotor. Nominal flow rate is 1000 scfm, with moisture-removal rate of 37.3 lb/hr at 90 degrees FDB. HCU suitable for commercial and residential applications.