Size Reduction Specialists, Corp. (SRS)
East Lansing, MI 48823
Oct 09, 2007 SRS Bridge-Buster force-feed control system moves large runners into 2-stage cutting system from within hopper. System eliminates down-time problems associated with feeding large runners into automated regrind cutting system as well as down-time due to bridging problems. Nylon slides are included on ram and same granulator can be used for both large and small runners.

ICS Triplex
Maldon Essex CM9 4LA  United Kingdom
Oct 03, 2007 Designed for oil and gas industry, AADvance Safety and Critical Control Systems (SCCS) enables users to operate and update entire plant-wide safety systems from one access point. Combined hardware and software solution delivers flexibility and scalability through its distributed nature, which consists of modular controller hardware situated close to plant it protects. Solution also helps minimize use of heavy cabling and installation time.

Honeywell Sensing and Control
Golden Valley, MN 55422 3935
Sep 17, 2007 Safety Solutions Packages, comprised of bundled safety switches and safety control modules, facilitate machine safety planning process by providing ready-made physical protective guarding plan. Solutions cover machine protective guard applications such as pick and place packaging and assembly equipment, semiconductor manufacturing equipment, plastic molding equipment, woodworking, textile and printing machinery, and custom equipment.

Euchner-USA, Inc.
East Syracuse, NY 13057
Aug 15, 2007 Featuring keypad with 14 freely configurable membrane keys, HBA-096692 lets users apply symbols and functions to said keys, as required, using printed slide-in strips from any standard printer. All membrane keys are also equipped with white LEDs that indicate important information on status of key to user by remaining on/off or flashing. Built-in emergency stop and maximum of 10 enabling switches make this unit suited for use in dangerous areas.

Wichita Clutch Div. Warner Electric
South Beloit, IL 61080
Jun 14, 2007 AquaMaKKs(TM) water-cooled clutches and brakes provide accurate torque control for constant tensioning for continuous slip tension applications in oil and gas, metal processing and forming, forestry, and marine deck machinery. Use of minimal parts facilitates installation and maintenance, while materials of construction and finishes provide protection in challenging environments. Water jacket design promotes heat absorption and torque stability, optimizing heat dissipation.

Toyoda Machinery USA Inc.
Arlington Heights, IL 60004
Jun 07, 2007 Allowing users to store data up to 64 different work pieces in resident memory, Model GC50 CNC grinder control is composed of hardware and software with integrated PLC. Product comes with automatic work speed, feedrate calculation, photo-enhanced maintenance instructions, and moveable pop-up windows for running position location. On-screen touch pad eliminates need for alpha-numeric keypad and makes it possible for operator to work without memorizing instruction manual.

MAGPOWR
Oklahoma City, OK 73114
Jun 05, 2007 Designed to prevent surprise problems, Smart Brake includes pad wear indicators that call attention to brake pads only when they need to be changed, eliminating common practice of changing all brake pads at regular intervals, regardless of wear. Heat detection features identify signs of overheating, and can automatically activate fans to dissipate heat, without operator intervention. Guard design dissipates heat, while allowing access to brake pads.

Versa Machinery
Elkhart, IN 46516
May 23, 2007 Used for time-based cutting, LC-2000 can measure products using encoder with measuring wheel and can also be wired to stop existing Puller when batch is completed or activate visual/audible alarm when batch is done. Internal batch control system lets operator preset batch quantity and repeat batch either automatically or via pushbutton actuation. Able to be used with any extrusion/profile cutter, system uses LEDs to display cut length, line speed, and cut rate.

Bosch Rexroth Corporation
Hoffman Estates, IL 60192-3707
Apr 26, 2007 Suited for new machines as well as upgrades and retrofits of Trans-01 motion controls, IndraMotion for Trans System comprises software that runs on IndraDrive controller section and Rexroth VCP08 operator panel. Digital IndraDrive consists of power amplifier and scalable controller section, which offers integrated IEC61131-3 PLC. It can operate IndraDyn induction, permanent magnet, rotary, or linear motors using standard position feedback systems.

Andantex USA, Inc.
Wanamasa, NJ 07712
Apr 24, 2007 Digital controller, Merobel DGT300, provides regulation capabilities for printing, labeling, and converting machinery. Employing Windows-based software, unit contains programming options such as inertia compensation, taper adjustment, on-the-fly management of web turrets, and E-stop torque control in proportion to set point. Solution, operable in closed- as well as open-loop modes, contains 5 built-in memories and one integral power supply.

ADLINK Technology Inc.
Irvine, CA 92618
Apr 04, 2007 Equipped with 4 pulse output channels, 4-axis PCI-8144 delivers pulse rates up to 2.4 MHz and offers precise synchronization across all axes to ensure simultaneous starts and stops needed for accurate motion of complex systems. Solution also features hardware-based emergency stop control and supports on-the-fly speed changes necessary for CNC machining automation. Support is also provided for T- and S-curve speed profiles as well as unsymmetrical acceleration and deceleration.

Haas Automation, Inc.
Oxnard, CA 93030
Mar 01, 2007 Within 6.5 x 6.5 ft footprint, Super Mini Mill provides work envelope of 16 x 12 x 10 in. and comes with 10,000 rpm, 15 hp vector drive spindle that accepts 40-taper tooling. System offers 28.75 x 12 in. table, 1 MB program memory, and high-speed (3 sec) tool changer. Running on 3-phase power, machine features 1,200 ipm rapid traverse rates and cutting feedrates to 833 ipm. Additional components include Haas control, coolant pump, LCD monitor, and beacon light.

SICK, Inc.
Minneapolis, MN 55438
Jan 26, 2007 Supporting more than 50 dual-channel safety sensors in single system, Model UE410 Flexi helps simplify module selection and understand logic configuration possibilities through Flexi Configuration Planner visualization tool. Intelliface(TM) modular safety controller requires no computer for programming, provides diagnostic interfaces for troubleshooting, replaces 2 or more conventional safety relays using single 22.5 mm module, and reduces interconnect wiring.

Pilz Automation Safety L.P.
Canton, MI 48187
Jan 23, 2007 SafetyNET p Ethernet-based system for safety-related, standard control and motion control applications features real-time capability. It scans topology of overall system architecture for identification of network structure, and gives status diagnostics on plant, machinery, and communication links. Decentralization allows controller intelligence to be transferred locally to field level, and open architecture allows implementation in parallel with other industrial Ethernet protocols.

Advantech Automation Corp.
Cincinnati, OH 45240
Jan 15, 2007 Facilitating 4-axis stepping and pulse-type servo motor control, Model PCM-3240 features intelligent NOVA MCX341-motion ASIC that provides 2/3-axis linear interpolation, 2-axis circular interpolation, and T/S-curve acceleration/deceleration rate. Unit performs functions without requiring main CPU processing. Additional features include hand wheel and jog junction, 4 MPPS pulse output for each axis, A/B phase or Up/Down encoder pulse, and 1 MHz encoder input for each axis.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Nov 21, 2006 Accepting all standard process signals such as 4-20 mA, 1-5 V, and 0-5 V, Series FIV flow rate/totalizer/batch controllers feature 7-segement LED display that provides 4½ digits of flow rate and 6 digits of total. For applications requiring more than display of rate or total, meters can be equipped with 2 relays and 4-20 mA retransmission output. Relays can also be used for alarming based on flow rate or for batch controlling based on flow total.

Rockwell Automation
Milwaukee, WI 53204
Nov 16, 2006 Measuring 4 x 3.5 x 5 in., SmartGuard 600 is suitable for applications that fall between safety relays and safety PLCs. It integrates 16 safety-rated inputs, 8 safety-rated outputs, 4 pulse test sources, USB port for configuration, and DeviceNet port that supports both standard and CIP safety communication in single package. Built-in DeviceNet port allows users to expand number of safety I/Os by controlling up to 32 Allen-Bradley Guard I/O safety modules.

Bosch Rexroth Corp., Corporate Headquarters
Hoffman Estates, IL 60192-3707
Nov 14, 2006 Able to control up to 10 stepper and servo motors, NYCe4000 Motion Control system integrates complete control and drive hardware in one unit. Compact multi-axis system features up to 120 digital and analog inputs/outputs, as well as open software architecture for automating modules and complete machines with optimal code protection for OEM. Up to 62 controllers can be operated in network using standard PC technology.

Columbia Marking Tools, Inc.
Chesterfield, MI 48047
Oct 05, 2006 With features and remote troubleshooting capabilities specific to part marking and vision reading applications, PCS-2000 works with dot-peen, laser, and scribe marking machines. On-screen video programming, displayed on 15 in. LCD monitor with 1,024 x 768 pixel resolution and touchscreen keyboard, shows operators how to input or change marking information. Product is preloaded with Windows® XP Professional and additional software designed for specific marking applications.

Southwestern Industries, Inc.
Cincinnati, OH 45202
Oct 02, 2006 Along with 4.09 in. spindle through-hole and geared head, TRAK TRL 2460SX features 2-speed tailstock, P5 tapered roller bearings, and digital servo motors. Lathe can be used manually with assists from CNC to perform tapers and radii, and complete part programs can be done directly from print by naming geometry required and then answering prompts. ProtoTRAK SLX CNC offers Spreadsheet Editing(TM), informative graphics and networking capabilities as well as optional DXF file converters.