Phihong USA    Fremont, CA 94539
May 06, 2013 Suited for home or office lighting applications, LED lighting remote control lets users to switch lights on and off and use dimming features. Remote is powered by 3 V button-cell battery and has range of up to 23 ft when pointed directly at IR receiver. Offering same functionality as remote controls, wall-mounted touch control pads can be wall-mounted up to 33 ft away from receiver. Suitable lighting applications include medical facilities and clean rooms.

Autani Corporation    Columbia, MD 21046
Apr 22, 2013 Featuring scalable, room-based design, e>pod replaces line voltage installation with distributed system of low voltage controllers and Class 2 wiring. Control supports 8 zones of LED lighting per room, and is compatible with wired or self-powered wireless switches and sensors. e>pod rooms can operate as stand-alone control systems, integrate with BAS system, or join EnergyCenter wired or wireless control network.

Integrated Silicon Solution, Inc. (ISSI)    San Jose, CA 95112-4216
Feb 19, 2013 Flicker-Free™ IS31LT3935 solid state lighting (SSL) LED controller features dimming core based on AccuDim™ technology, which makes LED retrofit lamps have monotonic dimming profile across entire dimming range. With 100% compatibility with leading edge, trailing edge, and digital TRIAC dimmers, single-stage current mode LED controller comes in 3 x 3 mm DFN-10 package with exposed pad and enables 120/230 Vac lamp applications in compact PCB area. Efficiencies are rated up to 87%.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Feb 19, 2013 Offered in 6-pin TSOT package measuring 2.9 x 2.9 mm, Model TPS92075 is designed for phase-dimmable, offline AC/DC LED lamp and downlight applications such as E14, GU10, A19, and PAR20/30/38 bulbs. Constant-current lighting controller achieves power factor correction above 0.9 while delivering flicker-free dimming when used with conventional wall dimmers. Supplied in 10-pin PowerPad™ MSOP package, Model TPS92560 is intended for low-voltage AC or DC LED lamp applications such as MR16 and AR111.

STMicroelectronics    Lexington, MA 02421
Feb 18, 2013 With STM8 MPU core and 6 SMED (State Machine, Event-Driven) circuits, STLUX385 (Masterlux™ platform) improves performance of LED, fluorescent, and HID lighting systems. Single programmable chip addresses power conversion and control topology requirements stemming from such factors as lighting technology used, input power source (AC or DC), dimming requirements, and safety or reliability issues. Controller also integrates hardware Digital Addressable Lighting Interface peripheral.

Fulham Worldwide    Hawthorne, CA 90250
Jan 15, 2013 Compatible with LED and fluorescent technology, plug-and-play HorseSense™ system installs into existing fixtures in individual rooms and does not require any commissioning; drivers/ballasts are factory-addressed. Energy conservation opportunities are possible via occupancy sensing, dimming, and multi-scene control. Addition HorseSense controller, software, and commissioning enables larger areas can be controlled, such as floors, non-adjacent rooms on floors, or entire multi-floor building.

Billion Electric Co., Ltd.    New Taipei   Taiwan
Dec 13, 2012 Intelligent Lighting Control and Management Systems (LCMS) enable administrators to centrally manage and control streetlight networks. LCMS PLC lighting network uses wired narrowband power line communication technology to control outdoor lights; infrastructure includes power line control box and segment controller. LCMS wireless street lighting network uses IP based broadband RF mesh technology, and infrastructure consists of wireless control box embedded in light head.

Phihong USA    Fremont, CA 94539
Nov 30, 2012 Without requiring any physically mounted wall controls, remote access tools allow administrators to power, dim, shut off, program, and reset networked indoor, outdoor, and architectural LED lighting from any Web-enabled computer, PDA, or tablet. Customized drivers feature on-board module that can receive and relay commands via WAPs, and users can control networked lighting installations via cloud-based, remote access GUI.

WAGO Corp.    Germantown, WI 53022
Jul 24, 2012 Controlling 64 Digital Addressable Lighting Interface actuators, WAGO 753-647 DALI Multi-Master Module connects with up to 64 sensors, eliminating need to install sensor-only parallel bus. Configuration GUI software delivers project overview, device addressing, volume processing, and data backup and restore functions. WINSTA® 770 Series MIDI Modular Connector System, ranging from 2-5 poles, is rated up to 600 V/20 A and supports building automation.

Ohio Gratings, Inc.    Canton, OH 44706 1943
Jul 09, 2012 In addition to shading system, Sunshade+ provides lightweight walking surface for maintenance access for low-rise buildings. I-bar construction, designed to carry 300 lb concentrated load, provides strength and stability for foot traffic. Able to integrate into any window system, product comes in various finishes and provides 100% solar block at 72° sun angle. Spans are pre-engineered for safety and manufactured from pressure locked aluminum.

Acuity Brands Lighting    Conyers, GA 30012
May 24, 2012 With pre-configured server and gateway, ROAMview(TM) connects to user's existing computer network, enabling wireless control and monitoring from any computer within organization. Browser-based portal facilitates control for grouping outdoor lighting fixtures, and applies customer-defined schedules for precise on/off and dimming. Designed to track and report individual fixture performance as well as outages, ROAMview eliminates night-time audits and waste of day-burning lights.

Acuity Brands Lighting    Conyers, GA 30012
Apr 27, 2012 Designed to function in individual room or across entire facility/campus, nLiGHT® network lighting control technology integrates time-based, daylight-based, sensor-based, and manual lighting controls. It is also available Sensor Switch® nWiFi(TM), which adds conventional WiFi technology (802.11n) to nLight devices, such as occupancy sensors and relays, to enable them to seamlessly communicate with wired and wireless nLiGHT lighting control zones.

Production Resource Group    Las Vegas, NV 89118
Mar 13, 2012 Models PRG V676® and V476® are available with Vx76 v3.0 Software, which provides integrated 3D programming environment with real-time status and off-line editing capabilities. Media Display, located in Function Palette on front panel of console, facilitates access to media clips. Along with CITP Media Protocol Control, features include 4,000 channels of control, Patch spreadsheet with interface for editing and tagging data, and multiple dimmer address support.

Elemental LED    Emeryville, CA 94608
Feb 15, 2012 Designed to fit into any standard light switch wall outlet, Reignbow LED Color Selector provides dual-slide dimmer and color picker. Slider on left allows user to dim RGB LED lights, while slider on right lets user choose one color of light to display. Color picker moves through all colors in spectrum, and PWM dimmer enables simultaneous 0-100% dimming. Reignbow is suited for customers who want colorful LED lighting, instead of color-changing LED lighting.

Crestron Electronics, Inc.    Rockleigh, NJ 07647
Dec 22, 2011 Installed on single gang wall box, 2.8 in. Model TPMC-3SM works with Crestron Fusion RV(TM) software to deliver room scheduling solution for office buildings. LCD provides view of each room's availability and lets users select room location, meeting time, and AV presentation resources needed. For home control, Model TPMC-3SMD offers customizable touchscreen graphics and icons for controlling lights, temperature, home theater, multiroom audio, security cameras, and iTunes® libraries.

Amerlux, Inc.    Fairfield, NJ 07004
Dec 06, 2011 Along with LED module and built-in speaker, SmartSite(TM) Street Lights feature duo-band radio system and miniature computer with data storage capacity. Street light processors communicate with each other through bi-directional wireless mesh network and monitor individual luminaire usage, energy costs, grid power, and system integrity. Luminaires also offer multimedia solutions that can upgrade existing infrastructure to provide information, advertising, security and entertainment for public spaces.

Schréder Lighting LLC    Elk Grove Village, IL 60007
Aug 01, 2011 With onboard metering chipset, Owlet(TM) Intelligent Street and Area Lighting Control System monitors and reports power usage with ±2% accuracy. Telemanagement system controls, meters, and manages outdoor lighting for major roadways, city streets, and other large public lighting applications. Each light point can be switched on or off, or dimmed at any time. Operating status, energy consumption, and possible failures are reported and stored in database with time stamp and geographical location.

ILLUMRA    Orem, UT 84058
Jun 20, 2011 Working with any Dawn/Dusk sensor, ILLUMRA CMR helps minimize energy consumption by shutting off lights during second half of every night. One device is installed per pole or fixture to shut off lights when not needed for maintaining safety lighting levels. CMR automatically synchronizes to existing dawn/dusk sensors, adapts to changing seasons, and limits peak demand inrush through sequenced start up. Applications include parking lots, parking garages, streetlights, and landscape lighting.

Quest Controls, Inc.    Palmetto, FL 34221-4802
Jun 16, 2011 Designed to act autonomously as well as in concert with OspreyFMS energy management dashboard, BACnet Communicating Controls include HVAC control for multi-stage conventional and heat-pump mechanical units, and 6 schedule lighting time-clock control with photocell inputs and internal astronomical calendar. Each device is equipped with LCD screen for programming, internal schedules, and inputs/outputs for monitoring appropriate mechanical points.

Schréder Lighting LLC    Elk Grove Village, IL 60007
May 19, 2011 Using open technologies and secure Internet connection, Owlet(TM) enables control of street and area lighting via Web-based applications. Wireless solution, used for monitoring, controlling, metering, and managing outdoor lighting, improves outdoor lighting reliability and security. Each light point can be switched on/off or dimmed at any time. Operating status, energy consumption, and possible failures, along with exact time stamp and geographical location, are stored in database.