Fisnar Inc.
Wayne, NJ 07470
May 17, 2005 Model VC-1195A can control both ON and OFF action of 1 or 2 dispensing valves. By using air to open and close valve, unit maximizes valve suck-back action and minimizes material stringing problems.

Sauer-Danfoss
Ames, IA 50010
Apr 06, 2005 With displacements of 147 and 165 cc/rev, Series H1 servo-controlled, hydrostatic pumps are available with electronic sensors to track speed, temperature, angle, and pressure. Electrohydraulic proportional valves, Series PVG 100 offers working pressures to 5076 psi, and provides equitable flow under all load and supply conditions. Using DSP technology and CAN communication, PLUS 1(TM) communications network provides connectivity and enables users to customize mobile machinery control.

Denison Hydraulics Inc.
Marysville, OH 43040
Feb 07, 2005 Model 4DP03-3B is rated at 100, 200, or 300 l/min flow rates with 5 bar-per-spool-edge pressure drop, or 500 l/min in double path configuration. It conforms to ISO 4401-07-06-0, CETOP 7, and NFPA 7 standards. Standard M12 connector socket with O-ring seal is supplied for interface connection, providing ramps adjustable up to 10 sec, and 10 V reference voltage for external potentiometer. Optional second connector is available to accept ramp on/off and emergency stop inputs.

Spirax Sarco, Inc.
Blythewood, SC 29016
Dec 07, 2004 Available in sizes from 1–8 in., C Series control valves offer pressure ratings conforming to ANSI 300 and ANSI 600, and come in carbon steel, alloy steel, or stainless steel body materials. Cage-guided balanced plug provides control over high differential pressures, and 1-, 2- and 3-stage designs are offered to minimize cavitation and aerodynamic noise. Modular structure enables single valve envelope to address variety of control applications.

Woodward Industrial Controls
Fort Collins, CO 80525
Jul 06, 2004 GVP-100 all electric cage-guide control valve system suits low-power gas flow applications such as remote monitoring in gas production fields. System operates on solar panel and 12 Vdc battery system with digital actuator that employs gear-reduced, low-power brushless motor to minimize power requirements. DSP-based digital driver provides self-diagnostics, remote monitoring, and configuration, and valve design minimizes flow restriction for maximum capacity.

Fisnar Inc.
Wayne, NJ 07470
Jun 01, 2004 Programmable Model SVC100 supplies both operating air and atomizing air to spray valve. Transfer efficiency is maintained by built-in operating air pressure regulator. Adjustable atomizing air creates pressure into spray valve's air cap, atomizing material. Three separate time intervals, including pre-spray, spray, and post-spray time can be set, ensuring that consistent and repeatable area is covered and maintained throughout coating operation.

High Pressure Equipment Co.
Erie, PA 16505 3522
Mar 16, 2004 Hippo Piston Air Operators, available in NO and NC configurations, provide remote automatic on/off operation of valves with max operating pressure of 60,000 psi. Controlled via air regulator, electric solenoid, or manual low-pressure valve, both configurations have 1/8 in. NPT air inlet. Spring to open/air to close service requires air pressure from 30–100 psi, while air to open/spring to close service requires air pressure from 35–120 psi.

Emerson Process Management
Knoxville, TN 37932
Nov 28, 2003 Fisher® FIELDVUE® Digital Valve Controller provides green-yellow-red indication of operating status and recommended course of action. Using AMS Device Manager software with ValveLink® SNAP-ONâ„¢ application, controller detects emerging conditions at valve that could lead to failure. It analyzes and trends diagnostic data while valve is in service without impacting process. It detects 200+ fault conditions and documents results in preformatted Microsoft Word® format.

Leslie Controls, Inc.
Tampa, FL 33637
Jul 07, 2003 Aeroflow T2 High Gain trim offers tight process control and, when coupled with Leslie's Digital Positioning System, provides accurate, repeatable, high-speed response. Combined with inherently stable T2 trim, Aeroflow body vanes provide control of turbulence and vibration. Cages can be customized for any application and have up to 5-stage anticavitation.

Smith Flow Control
Erlanger, KY 41018
Jun 30, 2003 Flexi-Drive consists of 3 elements: operator station comprised of geared handwheel and mounting facility; valve station actuator; and drive cable that links both. Cable transmits torque in excess of 280 lb-ft up to 200 ft away, accommodating 540° of bends in cable run. Designed to withstand high impact shock, sinusoidal vibration, and open flame conditions, unit can be used down to 50 ft underwater and in temperatures from -65 to +400°F.

Bio-Chem Valve Inc.
Boonton, NJ 07005
Feb 19, 2003 CoolCubeâ„¢ allows placement of overdrive voltage on solenoid valve, which can decrease valve response time, increase operating pressure, and reduce power consumption. Control module provides step-down voltage to 1/3 of input voltage. Hit and hold circuit accepts 12 or 24 Vdc input to energize solenoid valve with full power for 110 msec. It then drops voltage and current and reduces power consumption to 1/9 of original value to hold valve in its energized mode, reducing heat generation.

Wachs, E.H., Co.
Wheeling, IL 60090 6022
Oct 30, 2002 Multifunctional, handheld Model RS-II, with choice of hydraulic, pneumatic, or electric drive, and forward and reverse operation, operates all rising and non-rising stem valves from 6 to 60 in. Unit mounts directly to rising-stem valve using universal hand-wheel adapter, allowing for semi- and permanent-mount applications in petro-chemical, wastewater, and water distribution markets. Offerings include variable speed control and built-in LCD counter.

Merritt, J. R., Controls, Inc.
Stratford, CT 06615
Aug 27, 2002 Microprocessor-based MPFC/CR programmable driver board accepts 4-20mA or 5 V input signal. PWM outputs are current regulated and can be configured for bi-directional control of single and dual coil valves. Flow control is available with 1 analog and 3 solid state auxiliary outputs. Board features LED diagnostics, ramp to or through center, neutral off switch, broken command signal detection, reverse polarity and short circuit protection.

ASCO (Automatic Switch Co., Valve Div.)
Florham Park, NJ 07932
Apr 24, 2002 DeviceNet solenoid valve is a discrete device that is hooked to DeviceNet connection for direct control of solenoid valves. Applications include automotive, semiconductor, food and beverage, and manufacturing plants.

Hayward Industrial Products, Inc.
Elizabeth, NJ 07207
Mar 21, 2002 Universal Control Panel works with electrically- or pneumatically-actuated valve systems. Control relay and expansion modules provide max of 20 digital inputs, 2 analog inputs, and 10 relay outputs rated to 10 A resistive. Panel functions include 8 timers, 8 counters, 4 real-time clocks with 4 channels per clock, and 8 display messages. Panel has main power disconnect switch. UL 489 circuit breaker allows power to be wired directly to panel.

Therm-Omega-Tech, Inc.
Warminster, PA 18974
Mar 14, 2002 EMPC electronic controller is suited for company’s valves, and can be adapted to other systems. It has adjustable setpoint, proportional band, PID and temperature offset, and provides operation within narrow bands with no hunting or overshooting. Compact controller is easy to set up and tune, and has no motors, gears, lead screws, or solenoids. Controller has 24 Vac/dc power input and output, optional 4-20 mA input, and DIN-rail mount enclosure.

Parker Hannifin Corp., Pneumatic Div.
Richland, MI 49083 0901
Jan 17, 2002 FlexSAM modular communication package offers direct control of up to 32 inputs and 32 outputs without discrete wiring of remote operating valve manifolds. Input modules accept NPN or PNP inputs without circuitry or wiring changes. System includes output diagnostics for auto detection of short circuits, built-in emergency stop that turns off all outputs while keeping communications and inputs alive, and NEMA 4 protection.

Collins Instrument Co., Inc.
Angleton, TX 77515
Jan 04, 2002 Model l000B series low-flow control valves, available with PTFE bellows seals are suitable for corrosive applications. They feature all-plastic construction, various Cv's, and pneumatic or electronic operation. Permeation-resistant PTFE bellows seal is designed for use in hazardous or corrosive environments; back-up stem seal packing arrangement is incorporated in each valve for additional safety. Current-to-pneumatic transducers are available.

Hydro Electronic Devices, Inc. (HED)
Hartford, WI 53027 0218
Dec 13, 2001 Programmable DVD-2 pulse width modulated (PWM) solenoid driver can control any brand proportional valve, motors, pumps or other device that responds to PWM signals. Software-based unit operates by processing low power analog input signal to produce corresponding high power, high efficiency PWM output signal. Source of analog signal could be control levers, potentiometers or PLC. Unit comes in NEMA 4 enclosure and has Deutsch connectors.

Parker Hannifin Corp., Pneumatic Div.
Richland, MI 49083 0901
Nov 08, 2001 PVLB10 and PVLC10 Serial Bus Modules provide 16 output capability and are compatible with DeviceNet, Profibus-DP and Interbus-S protocols. They have 21.6 to 26.4 Vdc solenoid supply voltage and continuous duty working temperature rating of 32°F to 104°F. Modules are suitable for applications where there is a need to reduce wiring, or when sandwich regulation, flow controls or input connectivity are not required.