Axiomatic Technologies Corp.
Mississauga, ON L4W2Z3  Canada
May 06, 2008 Featuring 32-bit microprocessor technology, AX021600 Single CAN Controller includes one universal signal input, one software-controlled output up to 2 A, and one CAN port. PCB is enclosed in heat shrink wrap with 6 in. lead wires terminated in 3 Deutsch IPD DT06 plugs for installation in-line with wire harness. Operating from 6-60 Vdc, controller accepts sensor, joystick, frequency, or other input and applies software-based algorithms for complex or simple control functions.

Emerson Process Management
Pleasanton, CA 94566
Mar 20, 2008 Designed for Safety Instrumented Systems (SIS), Fisher® FIELDVUE® DVC6000 digital valve controller features manual reset, stored safety demand event log, pass/fail status after partial stroke test, and third party certification to SIL3, SIF loop. It operates by input signal of 0-24 Vdc, 0-20 or 4-20 mA, and meets IEC61508 requirements. Controller is also available in stainless steel for harsh offshore environments.

Axiomatic Technologies Corp.
Mississauga, ON L4W2Z3  Canada
Feb 13, 2008 Model AX021200 valve driver controller drives multiple 12 or 24 V proportional valves while operating at up to 72 Vdc for machine control in harsh environments. Along with rugged IP67 packaging and connectors, it features CANopen or J1939 input, 9 proportional outputs (2 A) up to 6 A max, and operates off 8-80 Vdc input. Embedded software allows user configurable set points, and AX021200 allows PC-based configuration using Axiomatic Electronic Assistant and USB-CAN converter.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Jan 30, 2008 Offering weatherproof construction with cast iron body and O-ring seals, Series MGO provides on-off or throttling service for valves or dampers, including BFV Series butterfly valves ranging from 2½-12½ in. Self-locking worm and worm gear holds valve in desired position. In addition, operators include hand wheel, valve position indicator, and mechanical travel stops that permit field adjustment of valve movement to specific degrees of rotation.

Tyco International (US) Inc.
Princeton, NJ 08540
Nov 27, 2007 Able to create dynamic baseline signature, Westlock XR® Linear/Rotary Control Monitor conveys critical information to process managers. Stand-alone field device features non-contact sensor for positioning and fully encapsulated electronics modules for detailed performance information. Calibrated, commissioned, interrogated, and maintained via XRa software, monitor provides comparison graphs in real-time via network, local RS232 port, or wireless communication.

Parker Hannifin Corp
Greenfield, TN 38230
Apr 04, 2007 Capable of synchronizing gas flow with pulsing lasers, Iota One precision valve driver system offers pulse duration ranges in µsec, msec, or longer with internally-generated pulse trains achieved by setting on/off times or operating frequency. Self-contained, rack-mountable system includes front panel BNC jacks for both I/O TTL signals. Single- and multi-channel units produce repetition rates up to 250 (maximum 50% duty cycle) and 999 Hz, respectively.

Asahi/America
Malden, MA 02148
Nov 07, 2006 Constructed of composite plastic with black urethane coating, Plasgear will not corrode or rust from exposure to harsh chemicals. Submersible unit features visible PP position indicator, NAMUR mounting dimension that allows for mounting accessories, plastic PPG reinforced hand wheel, and adjustable travel stop for open and close position. Available in sizes from 1½-14 in., Plasgear is standard on Type 57 Butterfly Valves or can be supplied without valve.

Humphrey Products
Kalamazoo, MI 49003
Jun 30, 2006 Incorporating 2 pneumatic valves and Independent Intelligent Control(TM) into single module, Dual-Zone GEN2(TM) System is intended for pneumatically powered accumulation conveyors, as well as sequential and proportional control applications. Instead of central computer or PLC, module contains its own programmed logic to control both valves independently. It communicates directly with other modules, and makes independent decisions based on individual program instructions.

Parker Hannifin Hydraulic Valve
Elyria, OH 44036 4026
Jun 15, 2006 Snapped onto DIN rail, Digital Modules for electrohydraulic proportional valves can be configured to function in same way as various individual analog cards. While 3 modules include drivers for directional (PWD00A-400), throttle (PCD00A-400), and pressure control valves (PWDXXA-400), fourth module replaces accessory cards (PZD00A-400). Each unit, configured over RS232 null-modem cable via Parker ProPXD software, accepts download of user-defined custom settings.

Halogen Valve Systems Inc.
Irvine, CA 92614
May 23, 2006 Hexacon(TM) Model II control system closes up to 6 Eclipse(TM) actuators on toxic gas cylinder and ton container valves when activated by panic buttons or remote gas sensors. Model II computer system applies 30 lb-ft of torque for test closures and 50 lb-ft of torque for emergency closures of cylinder valve. SCADA systems can be provided with actuator closure status and error codes to analyze problems and take appropriate corrective action.

SPX Process Equipment
Delavan, WI 53115
Mar 06, 2006 With screw-on acrylic top and stainless steel base, 2-piece valve control module for W-Series Single and Double Seat Valves has 3 set-screws that secure it to actuator. It accommodates current switch options including Set & Forget switch that provides up to 3 24 Vdc outputs, as well as As-I, and DeviceNET. Available with up to 3 solenoids, extra solenoids can be used to power nearby valves. Seat wear option is available for single-seat valves.

Flowserve Corporation
Irving, TX 75039
Oct 10, 2005 Designed to handle seating and unseating force of high-pressure gate and globe valves found in power plants, MT Series is available in torque ranges to 8,000 lb-ft and thrust ranges to 325,000 lb. With ductile iron bevel gears and thrust base housings, units withstand elevated process temperatures. Operator stem nut is shouldered in drive sleeve to capture thrust forces within thrust housing without transferring forces to torque housing.

I & J Fisnar Inc.
Fair Lawn, NJ 07410 3002
May 17, 2005 Model VC-1195A can control both ON and OFF action of 1 or 2 dispensing valves. By using air to open and close valve, unit maximizes valve suck-back action and minimizes material stringing problems.

Sauer-Danfoss
Ames, IA 50010
Apr 06, 2005 With displacements of 147 and 165 cc/rev, Series H1 servo-controlled, hydrostatic pumps are available with electronic sensors to track speed, temperature, angle, and pressure. Electrohydraulic proportional valves, Series PVG 100 offers working pressures to 5076 psi, and provides equitable flow under all load and supply conditions. Using DSP technology and CAN communication, PLUS 1™ communications network provides connectivity and enables users to customize mobile machinery control.

Denison Hydraulics Inc.
Marysville, OH 43040
Feb 07, 2005 Model 4DP03-3B is rated at 100, 200, or 300 l/min flow rates with 5 bar-per-spool-edge pressure drop, or 500 l/min in double path configuration. It conforms to ISO 4401-07-06-0, CETOP 7, and NFPA 7 standards. Standard M12 connector socket with O-ring seal is supplied for interface connection, providing ramps adjustable up to 10 sec, and 10 V reference voltage for external potentiometer. Optional second connector is available to accept ramp on/off and emergency stop inputs.

Spirax Sarco, Inc.
Blythewood, SC 29016
Dec 07, 2004 Available in sizes from 1–8 in., C Series control valves offer pressure ratings conforming to ANSI 300 and ANSI 600, and come in carbon steel, alloy steel, or stainless steel body materials. Cage-guided balanced plug provides control over high differential pressures, and 1-, 2- and 3-stage designs are offered to minimize cavitation and aerodynamic noise. Modular structure enables single valve envelope to address variety of control applications.

Woodward Industrial Controls
Fort Collins, CO 80525
Jul 06, 2004 GVP-100 all electric cage-guide control valve system suits low-power gas flow applications such as remote monitoring in gas production fields. System operates on solar panel and 12 Vdc battery system with digital actuator that employs gear-reduced, low-power brushless motor to minimize power requirements. DSP-based digital driver provides self-diagnostics, remote monitoring, and configuration, and valve design minimizes flow restriction for maximum capacity.

I & J Fisnar Inc.
Fair Lawn, NJ 07410 3002
Jun 01, 2004 Programmable Model SVC100 supplies both operating air and atomizing air to spray valve. Transfer efficiency is maintained by built-in operating air pressure regulator. Adjustable atomizing air creates pressure into spray valve's air cap, atomizing material. Three separate time intervals, including pre-spray, spray, and post-spray time can be set, ensuring that consistent and repeatable area is covered and maintained throughout coating operation.

High Pressure Equipment Co.
Erie, PA 16505 3522
Mar 16, 2004 Hippo Piston Air Operators, available in NO and NC configurations, provide remote automatic on/off operation of valves with max operating pressure of 60,000 psi. Controlled via air regulator, electric solenoid, or manual low-pressure valve, both configurations have 1/8 in. NPT air inlet. Spring to open/air to close service requires air pressure from 30–100 psi, while air to open/spring to close service requires air pressure from 35–120 psi.

Emerson Process Management
Knoxville, TN 37932
Nov 28, 2003 Fisher® FIELDVUE® Digital Valve Controller provides green-yellow-red indication of operating status and recommended course of action. Using AMS Device Manager software with ValveLink® SNAP-ON™ application, controller detects emerging conditions at valve that could lead to failure. It analyzes and trends diagnostic data while valve is in service without impacting process. It detects 200+ fault conditions and documents results in preformatted Microsoft Word® format.