Hardy Instruments, Inc.
San Diego, CA 92123 1825
Jul 02, 2009 Offered with AC or DC power, HI 4060 rate controller includes standard EtherNet 10/100 Base T port, with embedded web server and RS 232 printer or scoreboard display port. It features INTEGRATED TECHNICIAN® (IT) for system diagnostics and troubleshooting and has secure memory module with SD card (SMM®-SD), which allows manual transfer of configuration data to another instrument or PC using SD technology. Product can be slaved to other devices for ration metric control.

Sierra Instruments, Inc.
Monterey, CA 93940
Apr 27, 2009 Coupled with Smart-Trak® mass flow meters (MFMs) and controllers (MFCs), Compod(TM) programmable control module simplifies basic flow control installations and permits networking of multiple instruments using open-source MODBUS RTU protocol. Dual digital outputs and one analog input can be configured by end-user various process controls. System also monitors functionality of MFM/MFC and includes diagnostic as well as fault/update notification capabilities.

Bronkhorst Cori-Tech B.V.
Ruurlo   Netherlands
Apr 22, 2009 Offering integrated PID control and close-coupled control valves or pumps, mini CORI-FLOW® suits applications in both liquid and gas flow. Unit provides analogue and RS-232 communication, optional fieldbus interfaces, alarms, totalizer to measure fluid consumption, and batch dosing, and features fluid temperature and density as secondary digital outputs. Available with IP65 weatherproof housing, it is ATEX Cat.3 Zone 2 approved for use in hazardous areas.

Thermal Dynamics Corp.
Chesterfield, MO 63017
Apr 08, 2009 Comprised of 3 independent modules, Automatic DFC-3000 (Digital Flow Control) functions as central manifold for all incoming gases in automated plasma cutting and works with 100, 200, and 300 A models of Ultra-Cut system. First module (TSC-3000) has touchscreen controller and USB port and saves programs for future use. Second module (DMC-3000) has 7 inputs and 5 outputs for gas use, while third module (DPC-3000) maintains/controls gas flows and pressures needed to optimize cutting.

Brooks Instrument
Hatfield, PA 19440
Apr 06, 2009 Built on standard 1.125 in. wide platform with user interface and local digital display, B-Series is designed to be insensitive to fluctuations in pressure and temperature. It actively measures line pressure and adjusts control valve, and has output characterized over full operating temperature range of device. Employing self-diagnostic routines, unit alerts user with alarm code in event of diagnostic fault, and also features service port for additional diagnostic capability.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Mar 18, 2009 Series RPV (Reducing Pressure Valve) comes in ½-2 in. cast iron and ½-1 in. stainless steel versions, respectively rated to 200 psig at 400°F and 300 psig at 420°F. Intended to satisfy fundamental requirements for pressure reduction from 3-140 psi, this steam/water/gas regulator can be used where space limitations are of primary concern. Along with integral stainless steel strainer, series has spherical seating surface on floating stainless steel disc that promotes tight shutoff.

Hardy Instruments, Inc.
San Diego, CA 92123 1825
Mar 02, 2009 Suited for auger, belt, and vibratory-based feeders, compact, single-feeder, closed-loop HI 4060 converts them from volumetric to gravimetric. It provides analog output to control feeder speed and adjusts this signal based on required rate at which feeder is losing weight. Features include embedded web server, true five-point automatic rate calibration, automatic feeder refill, various alarms including rate tolerance and disturbance, and RS 232 printer or scoreboard display port.

Sierra Instruments, Inc.
Monterey, CA 93940
Feb 02, 2009 With accuracy of ±1% of FS and repeatability of ±0.2% of FS, Max-Trak® Model 180 + Flanges is available with 316 stainless steel (ANSI or DIN) flange mounting for gas flow rates up to 1,000 SLPM (pipe sizes up to 1 in.). It features linear design, platinum sensor technology, and can communicate to user workstation via RS-232, RS-485, or one of 4 analog signals. NEMA 6/IP67 rated unit suits applications including metals and ceramics manufacturing and chemical processing.

Celerity Group
Tualatin, OR 97062
Jan 27, 2009 Series GC100 ditital mass flow controller (MFC) is used to measure and control gases in applications such as process gas control in solar cell manufacturing, glass and web coating, plasma cleaning, PEM fuel cell gas control, and bioreactor gas management. MFC offers user-configurability that eliminates need for individual gas and range calibrations, and intelligent embedded diagnostics, service port, and software for efficient on-tool maintenance are also included.

Celerity Group
Tualatin, OR 97062
Jan 27, 2009 Featuring pressure transient insensitive flow technology, GF100 Series is designed to precisely measure, monitor, and control ultra high purity process gas chemistry in semiconductor device and solar cell manufacturing processes. RoHS-compliant units offer in-situ electronic reconfiguration of gas and flow range, as well as intelligent embedded diagnostics, service port, and software for on-tool maintenance.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Oct 08, 2008 With system capacities for 250-12,600 scfm, Kaeser Flow Controllers accumulate compressed air in receivers and deliver only air needed for production. They respond to fluctuating demand, and actively maintain constant system pressure downstream. Stored compressed air can be used to satisfy air demand spikes without pressure drop at point of use. Units can be installed in new or existing systems without reconfiguring existing piping.

Bosch Rexroth Corp., Industrial Hydraulics Div.
Bethlehem, PA 18017
Jul 31, 2008 Electrohydraulic Flow Matching (EFM) control generates adjusting signals for pump at same time valves are controlled, ensuring adequate flow is made available. Promoting accelerated response to implement hydraulics, solution is operated in open control chain as electro-proportional variable pump. Pressure losses between pump and valve adjust themselves according to operating point.

Brooks Instrument
Hatfield, PA 19440
Apr 09, 2008 Featuring digital communications via built-in RS-232 protocol, Model 4800 Mass Flow Meter/Controller allows users to provide setpoint and receive process value, select one of 9 gases for calibration curve, access valve override function, and access re-zero function. Optional downport connection allows for top mounting to facilitate maintenance and installation while also offering space savings because there is no point-to-point tubing necessary.

Emerson Process Management
Austin, TX 78754
Jan 30, 2008 Featuring green label and green Bourdon tube, Fisher® C1 pneumatic controller can help decrease amount of pressurized air or natural gas lost to atmosphere. Proportional band adjustment assembly replaces 3-way valve, enhancing both control and safety. Materials are available for applications handling sour process fluids. Available models include proportional only, proportional-plus-reset, differential gap, and transmitter.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Jan 23, 2008 Available for system capacities from 250-6,200 scfm, Kaeser Flow Controller (KFC) promotes effective storage by accumulating compressed air in receivers and only delivering air needed for production. Controller is designed for effective response to fluctuating demand and actively maintains constant system pressure downstream. Stored compressed air can also be used to satisfy air demand spikes without pressure drop at point of use.

Emerson Process Management
Austin, TX 78754
Jan 10, 2008 DL8000 microprocessor-based batch delivery controller calculates flow for custody transfer using average measured product flow rates, measured temperature, pressure, and density to achieve measurement of flow at standard conditions. Double-precision math computations are enabled by Fisher® ROC-Series remote operations controller technology. Unit can be configured for different batch loading applications using ROCLINK(TM)800 software and is fully programmable for PLC tasks.

Jiskoot Inc.
Houston, TX 77014
Nov 08, 2007 InSpec 3-term PID controller offers flexible solution for 2-stream controlled rate, or wildstream, blending and analyzer trim applications. Designed with self-tuning algorithm to optimize blending performance at fastest achievable rate, product provides user interface with operator prompting and hot keys to display key parameters or alarms. Up to 20 user-defined recipes can be configured and stored for instant recall, and recipes may also be entered on demand.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Nov 08, 2007 Sigma Air Manager (SAM) balances service hours, prevents simultaneous motor starts, and maintains pressure control. Adapting to almost any system and able to manage up to 16 compressors or vacuum pumps, it also manages dryers, filters, and drains. It alerts operators to service requirements and provides trending data for plant operational analysis. Sigma Air Control basic software displays real-time operational status through Internet browser on PC.

Smith Equipment
Watertown, SD 57201-5636
Aug 06, 2007 Consisting of regulators, flowmeter regulators, and flow gauges, Series 30 features Sure-Seat(TM) technology with copper and nickel filter that prevents debris and ice from entering seat during operation. Diaphragms are constructed of laminated neoprene with reinforced nylon fiber. Instead of diaphragm burst disk, high-pressure regulators feature automatic reset relief valve. Flow gauges offer CO2 outlet flow up to 35 cfh without freezing or blocking gas flow.

Bronkhorst USA Inc.
Bethlehem, PA 18017
Jul 11, 2007 BRIGHT Series offers local indication and operation, flow rate in actual values/percentage, fluid selection, setpoint, counter, and alarms. Modules are designed for lab-style instruments and for instruments with IP65 housing. Communication between such instruments and product is established over RS-232 digital communication port. OLED display technology offers bright and wide angle visibility. Units can be mounted directly on instrument, adjacent wall/panel, or instrument's pipework.