Thermal Dynamics Corp.
Chesterfield, MO 63017
Apr 08, 2009 Comprised of 3 independent modules, Automatic DFC-3000 (Digital Flow Control) functions as central manifold for all incoming gases in automated plasma cutting and works with 100, 200, and 300 A models of Ultra-Cut system. First module (TSC-3000) has touchscreen controller and USB port and saves programs for future use. Second module (DMC-3000) has 7 inputs and 5 outputs for gas use, while third module (DPC-3000) maintains/controls gas flows and pressures needed to optimize cutting.

Brooks Instrument
Hatfield, PA 19440
Apr 06, 2009 Built on standard 1.125 in. wide platform with user interface and local digital display, B-Series is designed to be insensitive to fluctuations in pressure and temperature. It actively measures line pressure and adjusts control valve, and has output characterized over full operating temperature range of device. Employing self-diagnostic routines, unit alerts user with alarm code in event of diagnostic fault, and also features service port for additional diagnostic capability.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Mar 18, 2009 Series RPV (Reducing Pressure Valve) comes in ½-2 in. cast iron and ½-1 in. stainless steel versions, respectively rated to 200 psig at 400°F and 300 psig at 420°F. Intended to satisfy fundamental requirements for pressure reduction from 3-140 psi, this steam/water/gas regulator can be used where space limitations are of primary concern. Along with integral stainless steel strainer, series has spherical seating surface on floating stainless steel disc that promotes tight shutoff.

Mass-Vac, Inc.
North Billerica, MA 01862 0359
Mar 16, 2009 Capable of performing measurements ranging from atmosphere to hard vacuum, MAS-200LED-V Vacuum Gauge measures vacuum from 0.001-760 Torr and features 531 type thermocouple vacuum gauge tube that senses vacuum and displays results on large LED readout. Unit is packaged in rugged case, and can output readings to optional RS232 serial connection. It can also be used as vacuum transmitter to PLC or similar device.

Mensor Corp.
San Marcos, TX 78666
Mar 16, 2009 Utilizing regulator to achieve stable control in less than 3 sec, CPC3000 High Speed Pressure Controller/Calibrator offers accuracy of 0.025% of full scale. Unit includes color touch screen and intuitive menu structure. Remote operation can be accomplished via IEEE-488, USB, or Ethernet communication interfaces.

Teledyne Hastings Instruments
Hampton, VA 23661
Mar 12, 2009 Designed for use with DV-6 and DV-4 series thermocouple gauge tubes, Digital CVT (DCVT) digital vacuum gauge tube controller features dual setpoint control relays, analog output, and RS232 communication. It also features display that can be configured for torr, mbar, or pascal operation.

Zebra Skimmers Corp
Solon, OH 44139
Mar 09, 2009 Featuring heavy duty, mechanical components, Sump Level Regulator (SLR) activates user's water supply or fluid pump to maintain correct fluid operating level in each machine tool sump or central tank. It has only two moving parts, and offers simple, two-step installation. When coupled with Fill-Station(TM), unit creates automated fluid on demand system.

ICM Controls
Syracuse, NY 13212
Mar 05, 2009 With support for both dual pressure or temperature inputs, ICM333 operates as pressure or temperature-sensitive motor fan speed control, regulating head pressure by varying amount of airflow through condenser. Unit is compatible with single-phase systems operating at 120-480 Vac. Other features included are integral heat pump bypass circuitry, allowing for electronic bypass of speed control, and tamper-proof dials for adjusting temperature/pressure set points.

Axiomatic Technologies Corp.
Mississauga, ON L4Z1Z8  Canada
Mar 03, 2009 Designed to control 2 proportional or on/off solenoid valves, Model AX022000 features 1 universal signal input and two 3 A outputs. Unit can accept voltage, current, resistive, digital, frequency, or PWM input. Housed in aluminum enclosure with integral 12-pin connector, IP67-rated controller includes +5 V reference to power sensor, 1 CAN port, and user programming for application-specific control logic via CAN-based Electronic Assistant®, which runs on any PC with Windows® 2000 or higher.

Hardy Instruments, Inc.
San Diego, CA 92123 1825
Mar 02, 2009 Suited for auger, belt, and vibratory-based feeders, compact, single-feeder, closed-loop HI 4060 converts them from volumetric to gravimetric. It provides analog output to control feeder speed and adjusts this signal based on required rate at which feeder is losing weight. Features include embedded web server, true five-point automatic rate calibration, automatic feeder refill, various alarms including rate tolerance and disturbance, and RS 232 printer or scoreboard display port.

Greyline Instruments, Inc.
Massena, NY 13662
Feb 06, 2009 Designed for sewage lift stations, wet wells, and storage tanks, PSL Pump Station Level Controller features isolated 4-20 mA output and 6 programmable control relays for pump control, pump alternation, and level alarms. Automatic pump run time logging and reporting system helps operators to plan pump maintenance. Each PSL includes PSL Remote for Windows(TM) Operators software, which can prepare and save calibrations in advance and download to PSL through password-protected RS232 interface.

AMETEK Drexelbrook
Horsham, PA 19044
Feb 04, 2009 Safety IntelliPoint RF(TM) Switch, used in above-ground bulk storage tanks, meets American Petroleum Institute's 2350 Recommended Practice for overfill/spill protection. Specifically, it comes standard with SIL1 certification; SIL2 is optional, and SIL3 is possible with redundant switch. Integral software continuously monitors application for changes and maintains repeatable trip point on probe. Switch detects presence or absence of material without calibration, and MTTF is 110 years.

Sierra Instruments, Inc.
Monterey, CA 93940
Feb 02, 2009 With accuracy of ±1% of FS and repeatability of ±0.2% of FS, Max-Trak® Model 180 + Flanges is available with 316 stainless steel (ANSI or DIN) flange mounting for gas flow rates up to 1,000 SLPM (pipe sizes up to 1 in.). It features linear design, platinum sensor technology, and can communicate to user workstation via RS-232, RS-485, or one of 4 analog signals. NEMA 6/IP67 rated unit suits applications including metals and ceramics manufacturing and chemical processing.

Assured Automation
Clark, NJ 07066
Jan 30, 2009 With CB Series, users can operate electric or pneumatic actuators from remote location. Units are available with lamp indication for feedback confirmation of actuator/valve position. Housed in chemical-resistant, weatherproof enclosure, control boxes feature double-insulated, black plastic switches with contact rating of 10 A at 125/250 Vac. Boxes can also provide local indication for level sensing devices, as well as on/off control, eliminating full size control panel and terminal blocks.

Celerity Group
Tualatin, OR 97062
Jan 27, 2009 Series GC100 ditital mass flow controller (MFC) is used to measure and control gases in applications such as process gas control in solar cell manufacturing, glass and web coating, plasma cleaning, PEM fuel cell gas control, and bioreactor gas management. MFC offers user-configurability that eliminates need for individual gas and range calibrations, and intelligent embedded diagnostics, service port, and software for efficient on-tool maintenance are also included.

Celerity Group
Tualatin, OR 97062
Jan 27, 2009 Featuring pressure transient insensitive flow technology, GF100 Series is designed to precisely measure, monitor, and control ultra high purity process gas chemistry in semiconductor device and solar cell manufacturing processes. RoHS-compliant units offer in-situ electronic reconfiguration of gas and flow range, as well as intelligent embedded diagnostics, service port, and software for on-tool maintenance.

Parker Hannifin Corp., Pneumatic Div.
Richland, MI 49083 0901
Nov 25, 2008 Available as 3- or 4-way valve, EZ Inline offers streamlined design that lets end-users choose only features and options they need for their application. Sizes include 16, 19, and 26 mm, with flows from 0.8-2.4 Cv and inline/IEM mounting options. In addition to 15 mm electrical connection and option of 3-pin or flying lead connector, valve integrates balanced spool design and Wear Compensation System that lend to extended cycle life.

Axiomatic Technologies Corp.
Mississauga, ON L4Z1Z8  Canada
Nov 06, 2008 Providing 4 universal signal inputs to two 3 A outputs, Model AX021800 controls 2 proportional or on/off solenoid valves using PWM control from variety of input sources. Unit provides up to 100 mA on each input and uses 32-bit processing. Electronic Assistant(TM), together with USB-CAN converter, links PC to CAN bus for user configuration. Featuring IP67 packaging and connectors, controller also supports PID control and hydraulic fan control applications.

Anderson, W. E., Div., Dwyer Instruments, Inc.
Grandview, MO 64030
Oct 23, 2008 Requiring no external power sources, Series 38R feature die-cast aluminum housing with fully enclosed bellow assembly and internal over-range protection. Valves, offered in ½-6 in. connection sizes and 1/8-6 in. port sizes, are available with bodies in single-seated, direct or reverse-acting; double-seated, direct or reverse-acting; and 3-way designs with 4 choices of body material. Actuators are available with or without indicating dials or in Fail-Safe versions.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Oct 08, 2008 With system capacities for 250-12,600 scfm, Kaeser Flow Controllers accumulate compressed air in receivers and deliver only air needed for production. They respond to fluctuating demand, and actively maintain constant system pressure downstream. Stored compressed air can be used to satisfy air demand spikes without pressure drop at point of use. Units can be installed in new or existing systems without reconfiguring existing piping.