Automatic Timing & Controls
Lancaster, PA 17605
Dec 12, 2003 NEMA 4x, set-point Model APC100 suits submersible pump applications when analog sensors are used for level detection. Signal selection ranges are 4–20 mA, 0–5 V, and 0–10 V. Controller offers full duplexing action for pump-up/pump-down functions, 2 relay outputs for level alarm indication, 2 meters to log hours of operation, run and fail status contacts, 2 runtime meters, 2 local HOA switches, and programmable time-delay function to sequence restart after power failure.

Norgren
Littleton, CO 80120
Dec 03, 2003 Temperature/Level Switch is available with variety of switching configurations and temperature settings. Floats are provided as normally open on stems, but can be reversed to normally closed when specified. Switch wiring and installation is through one opening. Suitable for water and hydrocarbons, switch has max operating pressure of 150 psi. Operating temperatures are from -40 to +225°F in oil and -40 to +180°F in water.

Devar, Inc.
Bridgeport, CT 06605
Dec 02, 2003 Model 3660 monitoring, alarming, and controlling device can be used anywhere analog-to-contact closure control is needed. Push-button configuration provides for simplex/duplex/triplex modes of operation utilizing auxiliary relay that can be employed as independent alarm, control relay, or level-within-limits alarm. Security code enables prevention of unauthorized changes. Operating on 115 Vac, controller also provides 25 Vdc to power external transmitters.

Parker Hannifin Corp., Brass Products Div.
Otsego, MI 49078 1472
Dec 02, 2003 Flow Control Regulators mount directly on air cylinder and come in meter out versions. Adjustment screw provides precise airflow control, and locking nut resists effects of vibration. Regulators are offered with NPT threads and push-to-connect fittings or NPT threaded ports. All have solid brass body treated for chemical resistance, SS tube gripping ring, and nickel-plated brass adjustment screw. Working pressure is 15–145 psig and working temperature is 30–160°F.

Parker Hannifin Corp., Pneumatic Div.
Richland, MI 49083 0901
Dec 02, 2003 Miniature Flow Control Regulators control speed of small-bore cylinders such as pancake/flat types. Fine adjustment screw allows precise settings, while lock nut ensures that settings are maintained. Units have push-to-connect tube ends with NPT threads. All feature glass-reinforced nylon composite body, SS tube gripping ring, and nickel-plated brass adjustment screw. Working pressure is 15-145 psig, and working temperature is 30-160°F.

Parker Hannifin Corp., Brass Products Div.
Otsego, MI 49078 1472
Dec 02, 2003 Meter out versions of Miniature and Compact Flow Control Regulators allow vertical or angle tube exit where access is restricted. Fine adjustment screw and locking nut provide precise, maintainable settings. Mounting directly on air cylinder, compact versions measure 2 in. high at full extension and are offered with fractional inch push-to-connect ends and NPT or UNF threads; Miniature versions measure 1 in. All regulators feature working pressure from 15–145 psig.

Emerson Process Management
Knoxville, TN 37932
Nov 28, 2003 Fisher® FIELDVUE® Digital Valve Controller provides green-yellow-red indication of operating status and recommended course of action. Using AMS Device Manager software with ValveLink® SNAP-ON™ application, controller detects emerging conditions at valve that could lead to failure. It analyzes and trends diagnostic data while valve is in service without impacting process. It detects 200+ fault conditions and documents results in preformatted Microsoft Word® format.

Parker Hannifin Corp., Brass Products Div.
Otsego, MI 49078 1472
Nov 25, 2003 In-Line Flow Control Regulators are unidirectional flow control valves with female NPT threads that allow them to be spliced into air cylinder port line. Construction includes glass reinforced nylon composite body, stainless steel tube gripping ring, and adjustment screw components of nickel-plated brass. Available with working pressures from 15–145 psig, units may be installed as meter in or meter out with full flow in both directions.

Parker Hannifin Corp., Brass Products Div.
Otsego, MI 49078 1472
Nov 25, 2003 Flow Control Regulators are available with raised fine adjustment screw and locking nut or recessed, knobless adjustment screw. Both are offered in meter out versions to provide precise airflow control and speed regulation of pneumatic cylinder. Units are available in various sizes for fractional inch tube to NPT threads for mounting directly to cylinder. Working pressure ranges from 15–145 psig, and body material is glass reinforced nylon composite.

Dart Controls, Inc.
Zionsville, IN 46077
Nov 20, 2003 Digital, closed-loop Series MD Drives are available with isolated 4–20 mA input/output modular option board. Package includes DC motor drive, 4–20 mA I/O, digital display, and relay outputs for pump running and fault alarms. Custom faceplate artwork is available.

Parker Hannifin Corp., Pneumatic Div.
Richland, MI 49083 0901
Nov 20, 2003 Offered with balanced poppet/valve design, Dial Regulators have transparent, pressure-calibrated, non-rising adjustment dial used to adjust secondary pressure. Full reduced pressure range can be dialed in less than 270°, and dial can be color- or graphics-coded. Products are available in 4 body sizes with ports from ¼-2 in. and have two ¼ in. gauge ports. Relief and flow capacities are available from 0.7 scfm (model 51R) to 1,600 scfm (model 54R).

Flex-A-Seal, Inc.
Essex Junction, VT 05453 0184
Nov 19, 2003 Lug-Lock Drive, for ANSI, process, and general service pumps, drives rotating element in mechanical seals. To install, user aligns lug to slot in sleeve, twists in place, and press-fits Teflon® anti-rotation disk behind lug. Lug-Lock fits all seal styles in Integrated Cartridge Seal program.

PumpSmart Control Solutions - Division of ITT Industries, Inc.
Seneca Falls, NY 13148
Nov 17, 2003 Microprocessor-based Model PS 200 is programmed specifically for any centrifugal pump up to 700 hp. Accurate control of any process parameter is obtained by continous monitoring and reaction to pump conditions and system demands. Pump output is matched to exact flow and head required by process. Model PS 200 protects pump from upset conditions including dry running, low suction, cavitation, dead heading, and excessive run out.

Siemens Building Technologies Ltd.
Sudbury, ON P3A 2A3  Canada
Oct 27, 2003 Predator® VAV Actuator integrates LonMark® certfied VAV controller in OpenAir direct-coupled damper actuator designed for 3-position floating control. Unit provides control of pressure-independent, single duct VAV/CV zone boxes. Preprogrammed control logic is configurable for variety of applications, including cooling or heating, fan, occupancy, and lighting control.

Rice Lake Weighing Systems
Rice Lake, WI 54868
Oct 24, 2003 Portable Source 3000 is equipped with 15.2 ft³ cylinder and 2 ports for connecting to measuring device and calibrator. Cover can be removed for positioning at different angles in tight spaces. Orion 2C pressure vernier allows user to dial in exact pressure readings, and on-board pressure regulator eliminates risk of damage from overshoot. Aluminum case provides lightweight portability as well as protection in industrial environments.

GE Company, GE Industrial Systems
Plainville, CT 06062
Sep 30, 2003 Series 7252 incorporates 2 GE Ruska quartz pressure sensors, each with its own control output. Pressure range combinations are available up to 0–2,500 psi. Model 7252i provides 0.005% of reading performance, while model 7250 provides precision of 0.003% FS for each installed range. Each model can control to set point in 15 sec or less, with no overshoot, providing control stability of 10 ppm of each range.

KSR Kuebler Of America, Inc.
Raleigh, NC 27613
Sep 26, 2003 Wave Control 234 harnesses ultrasonic band pressure waves to provide non-contact measurement of solid and liquid levels within tanks. Low frequency operation resists distortion and energy absorption from foam, dust, wind, and condensation. Available in 2-, 3- and 4-wire configurations, system utilizes transducer, which directs energy toward tank material. Standard range of 2-wire model is 80 m with overall accuracy of ±.25%.

Sigma Controls Inc.
Perkasie, PA 18944 1335
Sep 25, 2003 Programmable MYRIAD LC1 Digital Level Controller is microprocessor-based and housed in NEMA 4, watertight, outdoor enclosure. PC board is removable and graphical backlit display provides digital and bar graph level readouts with user-selectable engineering units. Four solid state digital inputs, 4 solid state outputs, and 2 form C relay outputs with setpoint and dead band adjustments are provided.

RKC Instrument
South Bend, IN 46628
Aug 26, 2003 Series HA430/930 dual-loop controllers include strain gauge type resin pressure input and 24 Vdc transmitter power supply for direct connection to transducers. Available in 1/4 and 1/8 DIN sizes, units offer sampling and control time of 0.025 sec with PID and other parameters settable in 1/100 units. PDA infrared port allows operator to set, change, or monitor settings using Pocket PC. Maximum of 2 measuring inputs and up to 5 event outputs may be specified.

ASG, Div. of Jergens, Inc.
Cleveland, OH 44110
Aug 07, 2003 Smart Torq™ Error-Proofer learns correct fastener installation characteristics, monitors entire assembly process, and controls final torque. It identifies variations such as differences in workpiece characteristics, fasteners, or assembly tool performance and detects and identifies cross-threading, premature shut-off, re-hits, cam-outs, missed fasteners, and incorrect torque. Supplied with Relay I/O and RS232 port, controller accommodates up to 8 parameter sets.