Schneider Electric
Palatine, IL 60067-7399
Jan 31, 2006 Measuring 45 mm wide, Altistart® 01 soft starts are available in 3 versions for single- and 3-phase asynchronous motors with horsepower ranging from ¼-75 HP at 110-575 V. Controls can be installed on DIN rail or panel mounted and feature removable control wiring terminal, quick adjust for starting torque and starting/stopping times, kickstart selectable boost for hard-to-start loads, and 2 LEDS signaling power on and motor up-to-speed.

Schneider Electric
Palatine, IL 60067-7399
Jan 10, 2006 Combining power and control functions with built-in intelligence and modular structure, Telemecanique® TeSys® U-Line Motor Starter operates up to 20 hp at 480 Vac with breaking capacity of 50 kA/400 V. Communication and interface modules for various network protocols enable starter to be integrated into any automation system. Broad setting ranges and ac/dc multi-range voltages enable 6 control units to meet requirements of motor applications up to 32 A.

Rockwell Automation
Milwaukee, WI 53204
Nov 29, 2005 Open Type Vacuum Starters, Vacuum Combination Starters, and Vacuum Pump Control Panels feature sealed contacts that help prevent dirt, residue, and other contaminants from causing premature wear to contactors or interference with mechanical operation. Sealed vacuum technology creates low-ion environment that is pure and constant, minimizing arc-to-ground failure. Starters and control panels are suited for applications that require heavy-duty cycling of motors.

Rockwell Automation
Milwaukee, WI 53204
Nov 18, 2005 Allen-Bradley SMC Flex features integrated I/O that helps control processes and monitor motor systems from networked soft-starter. Dual inputs help improve process monitoring and promote access to diagnostic information, while 4 outputs allow users to extend control capabilities to other processes. Controller also incorporates internal bypass contactor that helps reduce heat as well as replaceable control modules, fans, and power poles.

Siemens AG
Munich D-80333  Germany
Aug 24, 2005 Simatic ET 200pro is available with line starters and reversing starters, both with diagnostics options as well as electronic overload protection. Motors and loads up to 5.5 kW are connected directly to motor starters, which in turn are connected to Simatic ET 200pro distributed I/O system for integration in Profibus or Profinet communications network. Starters have IP 65 protection and are suitable for cabinet-free installation and use directly on machine at local level.

Rockwell Automation Canada
Cambridge, ON N1R 5X1  Canada
Aug 12, 2005 Using current loop gate driver circuit, Medium-Voltage SMC Flex Soft Starters limit starting torque and minimize mechanical damage to belts, gears, and other machine components. Units help meet utility restrictions by reducing high inrush current when starting medium voltage motors. SMC Flex family is suited for pump, fan, compressor, conveyor, and blower applications in industries such as automotive, forestry, metal and mining, petrochemical, and electric power.

Siemens Energy & Automation Inc., Motors & Drives Div.
Alpharetta, GA 30005
Jul 25, 2005 Sirius 3RW40 controls 2 phases in power range up to 300 hp/460 V, while Sirius 3RW44 features closed-loop torque control, allowing it to start drives up to power rating of 950 hp/480 V in standard configuration. Both have motor protection with adjustable overload tripping time, and bypass contact system, which minimizes power loss. Polarity Balancing ensures smooth start-up by generating uniform motor starting characteristics in speed, torque, and current.

Carlo GAVAZZI Automation Components
Buffalo Grove, IL 60089
Jun 01, 2005 Equipped with IP20 finger safe terminals and trip test, GMS Series includes 3 frame sizes rated for up to 32, 63, and 100 A. All units are available with rotary switch, except 32 A version, which is available with rotary and rocker switch. Slide out handle provides method to lock manual motor starter in OFF position, and dial cover secures current trip setting. Able to be DIN rail or surface mounted, devices are UL and cUL listed and CE marked.

Active Power Inc.
Austin, TX 78758
Aug 11, 2004 Battery-Free GenSTART System increases starting reliability for up to 8 MW of multiple standby engine generators. Individual GenSTART Module can supply 1725 cold-cranking amps to generator set starter motors. Both products supply engine generators with assured starting power at start-up. They meet safety and performance standards including listings from UL, FCC, and CSA. Each Module converts 3-phase 480 Vac from UPS to 24 Vdc, to supply immediate start power.

Rockwell Automation Canada
Cambridge, ON N1R 5X1  Canada
Mar 25, 2004 Medium-voltage SMC-Flex™ soft starter limits motor starting torque and reduces high inrush currents when starting MV motors, helping to prevent process shutdowns that can occur during brownout. Rated at 200/400/600 A from 2,400–6,900 V, unit provides closed-loop current regulation and tachometer feedback. Protection and diagnostic features include electronic motor overload protection, stall detection, jam detection, and ground fault protection.

Rockwell Automation
Milwaukee, WI 53204
Mar 25, 2004 Medium Voltage SMC-Flex soft starter limits motor starting torque, thus reducing damage to belts, gears, and other machinery. It minimizes high in-rush current to prevent process shutdowns that can occur during power system brownouts. Protection and diagnostic features include electronic motor overload protection, stall detection, jam detection, ground fault protection, thermistor input, warnings, and configurable auxiliary contacts. Power ratings are 200/400/600 A from 2,400-6,900 V.

Audiovox Corp.
Hauppauge, NY 11788
Mar 23, 2004 Informer Series confirming remote start model features visual confirmation of alarm system status or remote start on LCD screen on transmitter from up to 1,400 ft away. It incorporates dual-stage city shock sensor, LCD clock-alarm/parking meter timer, and selectable remote start run times of 5, 10, 15, and 20 min. Other features include 24 hr auto-start timer, 0° start mode, parking light flasher, 6-tone siren, and protected valet override.

Siemens Energy & Automation Inc., Motors & Drives Div.
Alpharetta, GA 30005
Mar 16, 2004 Sirius 3RW40 and 3RW44 enable gentle starting of 3-phase asynchronous motors and include integral bridging contact system and motor protection with adjustable overload tripping times. Sirius 3RW40 (2-phase) suits starting applications without step changes in torque and has output range from 75–250 kW at 400 V. Suited for drives with outputs up to 710 kW at 400 V, Sirius 3RW44 offers torque control, creep-feed function, diagnostic capabilities and graphical interface.

Danfoss Electronic Drives Div. Of Danfoss Inc.
Loves Park, IL 61111
Dec 31, 2003 Covering 10–150 hp range, MCD 200 Series Soft Starters offer heat dissipation, eliminating need for extra ventilation or bypass connectors, which simplifies installation and minimizes panel space requirements. Model MCD 201 offers timing voltage ramp functionality, and MCD 202 provides current limit soft start, timed voltage ramp down, and motor protection. Add-on modules are available to provide additional capabilities.

Square D Co.
Palatine, IL 60067
Aug 07, 2003 Telemecanique® TeSysâ„¢ U-Line motor starter features modular control units for protection and control functions, along with plug-in function modules, which simplify retrofitting. Communication and interface modules facilitate integration into automation systems. Motor current and control voltage are determined by control unit selected, which can be snapped into power base by hand. Starter operates at ratings up to 20 HP at 480 Vac 15 with breaking capacity of 50 kA/400 V.

Rockwell Automation
Milwaukee, WI 53204
Jul 18, 2003 Allen-Bradley® ArmorStart(TM) distributed starter is a pre-engineered, pre-configured motor starter with modular, plug-and-play design. Integrated, machine-mount configuration uses fewer cables, simplifying wiring and minimizing panel space requirements. Equipped with IP67/NEMA 4 enclosure, ArmorStart operates in demanding and wash-down environments. It can be used with motors ranging from .5-10 hp at 50/60 Hz with voltage range from 200-460 Vac.

Danfoss Electronic Drives Div. Of Danfoss Inc.
Loves Park, IL 61111
Jun 20, 2003 Mounted on the wall or directly to motor, DMS 300 is suited for soft starting and stopping of motor in either direction when no variable speed control is required. Housed in IP66/NEMA 4X enclosure, product is available with power range to 4 hp, 3-phase, 380–480 Vac. Dual part principle facilitates commissioning and service, while motor and cabling are protected by thermistor or built-in over-current surveillance. Integrated Fieldbus interfaces are optional.

ABB Instrumentation
Rochester, NY 14623
Jun 06, 2003 UL-listed Series PST is available for operating voltages from 208-690 Vac and full load line currents of 30-1050 A. When used on wye-delta wound motors, it is capable of inside-the-delta operation and uses automatic sequencing algorithm to adjust SCR firing without manual input. Offered with 2-line, graphical LCD, unit allows for storage of 3 motor parameter sets and machine-to-machine networking. Softstarter provides smooth acceleration of driven load and includes soft-stop feature.

TB Wood's, Inc.
Chambersburg, PA 17201 1778
May 14, 2003 With design that utilizes solid-state technology and closed-loop motor current feedback, S-trAC EST soft starters provide start control that supports PLC compatible digital and analog I/O for direct interface with automated systems. Products are available in Chassis, Enclosed, and Bypassed packages, all of which provide true soft starter functionality with soft start control of system and overload protection for AC motor. Keypad allows user to set custom parameters.

Eaton Corporation / Cutler-Hammer Automation
Milwaukee, WI 53216
Apr 24, 2003 Reversing and Non-Reversing Starters combine motor disconnect, magnetic short-circuit trip, overload, and contactor functions. They are designed to Type 2 Coordination standards, which require that starters exhibit little or no damage following major short-circuit fault and must be able to be returned to proper service without replacing any parts. Finger-proof line and load terminals prevent electrical shock to personnel.