Magnatag Visible Systems
Macedon, NY 14502
Mar 02, 2007 With 4 x 6 ft magnetic Production Efficiency-Tracker(TM) Board, production rates can be charted and tracked hourly for 24-hr day and translated into 31-day and year-long graphic line-chart summaries. Managers and employees can see not only if production goals are being met, but also performance figures and individual action assignments. Board includes magnets, dry-erase pens and markers, PreciseLine(TM) chart line tape and adhesive letter and number sets, cleaner, and board wipes.

Microchip Technology, Inc.
Chandler, AZ 85224 6199
Feb 01, 2007 PICkit(TM) Serial Analyzer enables design engineers to interface with circuits embedded deep within serial systems using any Windows®-based PC. It features 28-pin demo board with PIC16F886 Mid-Range 8-bit microcontroller, and GUI software allowing communication between PC and several industry-standard serial protocols on microcontroller tested, including I2C(TM), SPI, and USART. Source code and MPLAB® IDE integrated development environment are also included.

Nippon Pulse America, Inc.
Radford, VA 24141
Nov 01, 2006 With output current up to 1.2 A/phase (peak), Model NPAD10BF is capable of driving 2-phase stepping motors. It has input voltage range from 12-30 Vdc and measures 41.3 x 43.74 mm at its widest points. Bipolar chopping driver board includes automatic current reduction function and reset for sequence and disable. Product offers isolated input signals like pulse, direction, enable, and reset and can be mounted onto back of NEMA Size 17 motor.

Digital View, Inc.
Morgan Hill, CA 95037
Jun 28, 2006 Fully buffered, multi-sync Model SVH-1920 provides analog and digital connection for TFT LCD panels up to WUXGA resolution. Featuring full screen image expansion of lower resolutions, image flip and invert functions, and onscreen PIP functions, unit supports High-Definition Serial Digital Interface adapter for professional and broadcast video applications. Module enables SVH-1920 to support 2 channels of HD-SDI input and provide regenerated output for upstream HD-SDI services.

Digital View, Inc.
Morgan Hill, CA 95037
Jun 23, 2006 Fully buffered, multi-sync Professional Class SP-1600 provides direct analog and digital connection to TFT LCD panels up to UXGA resolution. Serial port utility permits control of all monitor functions via controller serial port. Remote adjustments of basic monitor functions such as contrast, brightness, switching video inputs, or gamma control can be performed. Measuring 7 x 4.74 in., board offers 8-bit-per-color, OSD menu, image scaling, and image control.

Curtiss-Wright Controls Embedded Computing
San Diego, CA 92121-1773
Jun 16, 2006 Available in PMC mezzanine card or half-length PCI card formats, Osiris supports 2 independent radar channels inputs at rates to 16k samples/return. Open standard-based solution supports sampling at frequencies up to 50 MHz on each of its 2 analog inputs, which can be mixed with up to 8 digital radar inputs. Its 64 bit, 66 MHz PCI interface can output 2 streams of radar video directly to host processor, and each stream can be processed using one of 2 sets of trigger and turning data.

Apollo Display Technologies LLC
Ronkonkoma, NY 11779
Apr 14, 2006 ArtistaNET(TM) LAN controller board integrates TFT LCDs over LAN or 802.11 b/g WLAN network without use of client PC. Featuring 4-wire resistive touch screen controller, board supports TFT LCDs with sizes of 5-46 in. diagonal and resolutions from 320 x 240 to 1,366 x 768. Configurable over DHCP through web browser, board provides Ethernet speeds of 10/100 MBit/s and is suitable for POI/POS displays, HMIs for machine control, and status displays.

Copley Controls Corp.
Canton, MA 02021
Mar 29, 2006 Compatible with 3.3 and 5 Vdc environments, Model CAN-PCI-02 provides interface between distributed motion control software and CANopen servo and stepper drives. On-board microcontroller offloads processing tasks from host computer, speeding system performance. Providing dual isolated channels and PCI 32-bit interface, card employs high-speed ISO 11898 driver circuits for CAN bus bit rates to 1 Mbit/sec. Two independent CAN ports are fully isolated for noise immunity.

Apollo Display Technologies LLC
Ronkonkoma, NY 11779
Feb 06, 2006 PRISMA II enables TFT LCDs to be connected to standard graphics/video interfaces. Input signals such as analog RGB, analog video, or DVI are converted into TFT-compliant TTL or LVDS signals. RoHS-compliant unit supports resolutions to 1,920 x 1,200 and offers auto-adjust functionality. It includes picture-in-picture and picture-by-picture, advanced HMI capability, and scaling features such as pan and zoom.

Calmotion
Chatsworth, CA 91311
Jan 02, 2006 Powered by PIC18F8722 microcontrollers, MC104P controller modules provide access to external memory and interrupts. They can utilize various PC/104 modules that offer peripheral expansion, including serial ports, 16-bit ADCs, optically isolated I/O, Pamux I/O, VGA Video capability, modems, and support for industrial networks. With MPLAB® ICD 2 in-circuit debugger, users can single step, watch individual variable changes, set breakpoints, and program Flash memory from within MPLAB IDE.

Atmel Corp.
San Jose, CA 95131
Dec 22, 2005 Based on ATmega406 single-chip smart battery AVR® device, ATAVRSB100 Development Board uses 3 support modules to simulate individual cell voltage, total cell stack voltage, and charge/discharge current. Flash-based ATmega406 integrates voltage regulator, autonomous battery protection, 99% accurate monitoring capabilities, FET control, and cell balancing FETs. Firmware supports SMBus V1.1 protocol handling, as well as basic algorithms for charge left estimation and battery charging.

TVI Electronics
Houston, TX 77040
Dec 14, 2005 Using ATMEGA16 microcontroller and 4 Mbit AT45DB041B Flash, Model TC51854 provides full support for Optrex F-51854 160 x 128 F-STN monochrome graphic transflective LCD with 4.7 in. diagonal viewing area for characters and/or graphics display. Independent pixel control allows user to display text and pictures simultaneously. Board includes RS-232 interface with 9 programmable baud rates, touch screen controller, animation, 4 integrated fonts, and multiple display modes.

Performance Motion Devices, Inc.
Lincoln, MA 01773
Nov 29, 2005 Consisting of software package and integrated board with MC73110 motor control IC, Model DK73110 allows designer to build stand-alone motor controller, amplifier, or intelligent drive for brushless motor control applications. Kit incorporates velocity loop, current loop, commutation, half-bridge MOSFET switchers, and integrated motor connections. It drives 3-phase brushless motor at up to 10 A, inputs analog or digital command signals, and requires single voltage input.

RoboteQ
Phoenix, AZ 85022
Nov 02, 2005 Microcomputer-based, dual channel Model AX1500 directly drives up to 30 A on each channel at up to 40 V. Fitted on 4.2 x 4.2 in. board, controller accepts commands from R/C radio or serial port interface. Two channels can be operated independently or combined to set direction and rotation of vehicle. Intelligent current sensing and controlling limits each channel's power output to 30 A for typical time required to accelerate or stop robot.

Arcom Control Systems
Overland Park, MO 66085
Oct 17, 2005 Designed for PXA255 ARM/XScale-based VIPER, QNX Neutrino 6.3 BSP includes drivers for integrated PXA255 graphics controller, Ethernet port, 5 serial ports, onboard 32 Mbyte Flash memory, real-time clock, 256 K battery-backed SRAM, audio codec, PC/104 bus, and TSC1 analog touchscreen controller. With operating temperature of -40 to +85°C, VIPER is suited for applications in industrial control and airborne communication systems.

FiveCo
Lausanne 1015  Switzerland
Sep 16, 2005 Providing power from 15-48 V, 10 A, Model FMod-IPECMOT 48/10 encompasses both motor controller and power level. It uses standard Ethernet protocols including TCP-IP, UDP, and HTTP. By using FSoft-MOTORCTRL software, user can configure various parameters and test system simultaneously. Integrated regulator allows for control in position as well as in speed, based on motor's encoder. For brushless motors, Hall sensors can be directly connected to card.

Digital View, Inc.
Morgan Hill, CA 95037
Jun 06, 2005 Model SVH-1920 provides full-screen buffering, multi-panel support, and range of inputs including ARGB, DVI, and Video with upgrade path for HD-SDI connection. Board can drive TFT LCDs at resolutions from VGA to WUXGA, with full screen image expansion. Featuring High-Quality Advanced Scaling, with support for non-linear scaling modes, unit includes dual-channel TTL and dual LVDS transmitters for direct connection to LCD panels, and can process 16.7 million colors.

Men Micro Inc.
Lago Vista, TX 78645-4160
Mar 25, 2005 Embedded System Module, Model EM01 is equipped with 384 MHz MPC5200 PowerPC featuring compute bandwidth of 760 MIPS, and Altera Cyclone® FPGA, which allows OEMs to implement application-specific functionality. Module includes 256 Mb SDRAM, 1 Gb NAND flash, 2 Mb non-volatile static memory, and 16 Mb graphics memory. Interfaces are provided for 2 Fast Ethernet ports, serial channel, and USB. Module operates over industrial temperature range of -40 to +85°C.

Curtiss-Wright Controls Embedded Computing
Leesburg, VA 20175
Mar 21, 2005 Avionics communication controller, Model P429A combines 2 ARINC 429 controllers, each with dual ARINC 429 transceivers, and 4 serial channels on single card. It includes 64 KB Dual Port RAM and 8 MB Flash Memory. Custom FPGA provides PCI interface bus to ARINC, serial channels, DMA controller, command and status registers, interrupt controller, PCI target controller, and Dual Port RAM and Flash memory. Conduction-cooled card is rated for -40 to +75°C environments.

Advantech Automation Corp.
Cincinnati, OH 45240
Sep 30, 2004 Models PCI-1241/1242/1261 provide 4- and 6-axis of servo and stepper motor control. They support 2D and 3D interpolation for linear, circular, and arc motion, as well as T- and S-curve acceleration. All 3 cards provide precise position and rotation control, as each axis is equipped with 32-bit logical position counter that counts axis pulse output number; and 32-bit real position counter that records feedback pulse from outside encoder or linear scale.