Pepperl + Fuchs, Inc.
Twinsburg, OH 44087 2245
Oct 27, 2006 Suitable for FOUNDATION Fieldbus and Profibus installations, Advanced Diagnostic Module for FieldConnex® Power Hub generates network documentation for each segment and device and controls fieldbus by monitoring physical layer. Built-in oscilloscope can be set to trigger on numerous events, allowing maintenance personnel to pinpoint fault locations from control room utilizing Device Type Manager. During commissioning, ADM makes snapshot of communication quality for trending changes over time.

Moore Industries International, Inc.
North Hills, CA 91343
Oct 06, 2006 Providing redundancy and automatic switchover in case of segment fault, TRUNKSAFE(TM) fieldbus system helps prevent loss of segment and potential process failures. Unit consists of 2 redundant TPS200 fieldbus power conditioners, 2 fieldbus cables, and 1 TS200 fail-safe device coupler to handle 6 or 10 fieldbus devices. System also offers hard-wired alarm to alert plant operators about cable fault, while LEDs indicate exactly which cable and what type of fault has occurred.

Woodhead Industries Inc.
Deerfield, IL 60015
Sep 01, 2006 Suited for applications where in-cabinet mounting, high-density I/O count, and modular design are required, IP20 BradControl(TM) Block I/O System connects industrial I/O devices to PLC or PC controller over industrial network. It is comprised of network adapter and up to 32 expansion modules mounted in enclosure. Ribbon cable-based expansion bus, which handles inter-module communication, operates at 11 MBaud and can accommodate up to 10 groups of modules.

Pepperl + Fuchs, Inc.
Twinsburg, OH 44087 2245
Sep 01, 2006 Supporting redundant 24 V power, Model KLD2-FBPS-1.25.360 galvanically isolated Foundation Fieldbus power supply provides 25 V and 360 mA of supply current with minimal heat dissipation, allowing modules to be mounted adjacent to one another without concern for spacing. Passive power conditioning (signal filter) makes it suitable for single segment power needs, and it supports connection to mobile advanced diagnostic module for physical layer diagnostics.

B & R Industrial Automation Corp.
Roswell, GA 30076
Aug 28, 2006 Comprised of base module, power supply module, and fieldbus interface, 1.5 in.-wide X20 bus controller enables real-time Ethernet cycle times of 200 µs. Entire bus-independent backplane can be preinstalled, and 2 RJ45 interfaces make daisy chain wiring possible. To transfer or receive I/O data on fieldbus, bus controller works by configuring fieldbus master and does not need to be programmed. Product is fully synchronized to network and all axes connected to it.

Moore Industries International, Inc.
North Hills, CA 91343
Aug 02, 2006 Available with 4, 8, or 10 fieldbus spurs, TG200 TRUNKGUARD(TM) Series uses fold-back technique to disconnect shorted instrument from fieldbus segment and prevent complete segment failure. Automatic Segment Termination feature, also included, simplifies commissioning and startup by eliminating problems caused by over- or under-termination. Series works with FOUNDATION fieldbus H1 and PROFIBUS PA interfaces, and up to 32 fieldbus devices can be accommodated in one segment.

NEC Electronics
Santa Clara, CA 95050
Apr 05, 2006 Compliant with USB 2.0 specifications, RoHS-compliant ECOUSB(TM) uPD720102 incorporates buffer memory and circuits optimized for system memory access that enable data transmission speeds to 33 MB/s. Optimized internal clock signals and on-chip 1.5 V voltage regulator enable power consumption levels down to 65 mA during data transmission and 100 µA during idle. This 3-port device complies with EHCI Rev 1.0 and OHCI Rev 1.0a specifications.

ADLINK Technology Inc.
Irvine, CA 92618
Mar 24, 2006 Built with PCI MD1 form factor, LPCI-3488 complies with IEEE488.1/.2 standards and supports application development environments such as VB, VC, Delphi, LabVIEW, and TestExec. This 32-bit, 33 MHz PCI bus GPIB interface controller offers drop-in compatibility and supports Windows 98/NT/2000/XP/2003. PCI interface supports 3.3 and 5 V PCI bus, while 1 KB on-board FIFO and CPLD high-speed bus control state machine gives unit 1.5 MB/s max transfer rate.

B & R Industrial Automation Corp.
Roswell, GA 30076
Mar 16, 2006 Modular X20 bus controller is made up of base module, supply module to supply voltage for entire system, and offers interfaces for all standard fieldbuses (DeviceNet, Profibus DP, CANopen) as well as real-time Ethernet. Measuring 1.5 in. wide, unit expands with other IP67 modules and valve manifold connections, and modular design enables pre-installation of entire backplane. Ethernet unit has 2 RJ45 connecters integrated for daisy chain wiring.

ICS Electronics Corp.
Pleasanton, CA 94588
Dec 05, 2005 Suited for controlling GPIB Instruments and devices over Internet or company network, Model 8065 provides access from any computer with NIC or TCP/IP interface. Server is compliant with VXI-11.2 and VXI-11.3, providing user with full control of GPIB bus and ability to perform IEEE-488.2 Controller protocols. RoHS-compliant unit, able to handle up to 15 VXI-11 links to support multiple clients, supports SRQ handling, serial polling, and SRQ notify.

Moore Industries International, Inc.
North Hills, CA 91343
Nov 30, 2005 Suited for DCS installations, ROUTE-MASTER(TM) Series 100 System features intrinsically-safe, isolated power supply with 350 mA per segment, which can drive up to 16 devices over cable segments up to 1,900 m long. Product utilizes split architecture design with device coupler mounted close to group of devices anywhere in Class I Division 1 Group C or D environments. Able to power FOUNDATION fieldbus or PROFIBUS PA devices, product features 99.99993% availability.

Hayward Industrial Products Inc., Hayward Flow Control Systems
Clemmons, NC 27012
Oct 21, 2005 Used in piping systems with 8 or more electrically or pneumatically actuated valves, Bus Control System allows all actuators in system to be controlled by PLC with one pair of wires. Actuators are daisy chained on same pair of wires, with each actuator assigned unique address for identification by PLC. Only designated actuator has ability to read and act on control instructions. In addition to control simplification, system also reduces wiring complexity.

Siemens AG
Munich D-80333  Germany
Aug 24, 2005 Simatic ET 200pro is available with line starters and reversing starters, both with diagnostics options as well as electronic overload protection. Motors and loads up to 5.5 kW are connected directly to motor starters, which in turn are connected to Simatic ET 200pro distributed I/O system for integration in Profibus or Profinet communications network. Starters have IP 65 protection and are suitable for cabinet-free installation and use directly on machine at local level.

Addonics Technologies, Inc.
San Jose, CA 95131
Apr 22, 2005 Able to connect up to 4 external SATA hard drives, hot-swappable ADSA3GX4R-E is powered by SATA II ASIC, which provides embedded support for first-party DMA commands for Native Command Queuing and on-chip hardware RAID. Controller supports PCI-X and PCI Bus systems, providing 3 Gbps throughput rate per port for RAID or non-RAID external disk arrays storage applications. Attatched drives can be configured as RAID 1/0/1+0/1+S or as 4 individual drives.

Siemens AG
Munich D-80333  Germany
Apr 05, 2005 Simatic ET 200pro features IP65/67 protection and safety-relevant Industrial Ethernet communication using Profisafe profile. Actuators and sensors are connected via fail-safe I/O modules. With interface module, standard and fail-safe modules can be optionally integrated in Profibus or Profinet networks, where standard and fail-safe communication is carried out in parallel on one cable. ET 200pro solves automation tasks with safety requirements up to SIL 3 or Category 4.

Fieldbus Foundation
Austin, TX 78731
Feb 10, 2005 High-Speed Ethernet (HSE) Interoperability Test Kit v1.0 includes all hardware and software required to ensure complete HSE device interoperability as specified by Fieldbus Foundation's official registration testing procedure. HSE ITK consists of test engine that executes over 400 test cases to exercise device implementation, test function block, and device description (DD) viewer that allows examination and verification of device's DD.

Siemens AG
Munich D-80333  Germany
Dec 09, 2004 Featuring IP65, 66, and 67 protection, Simatic ET 200pro is vibration-proof to 25 g shock load and is installed directly at machine outside control cabinet. Profibus communication and voltage supply can be connected directly using screw-type cable glands at up to 16 A electronic load, M12 or 7/8 in. standard connectors, or Ecofast with prepared cable for data and power. Interface module can be expanded using up to 16 modules.

Parvus Corp.
Salt Lake City, UT 84115 2913
Dec 08, 2004 With PC/104-Plus form factor of 3.550 x 3.775 in., USB104+ module provides 4 downstream ports: 2 supplying up to 500 mA drive, and 2 enhanced ports supporting up to 2 A drive, which can directly power attached devices. All downstream ports allow mixed, simultaneous connections of USB 2.0 and/or 1.1 devices at different speeds from 1.5–480 Mbps. Board supports hot insert and is compatible with real-time operating systems.

Pepperl + Fuchs, Inc.
Twinsburg, OH 44087 2245
Nov 24, 2004 FieldConnexâ„¢ provides multiple power supplies for fieldbus devices via digital data lines. It consists of motherboard with single or redundant plug-on modules, including isolated power module with 30 V and 500 mA, isolated FNICO power module with 17 V and 500 mA, and non-isolated module with host spur protection. System is installed on DIN-rails and integrates fieldbus segment connections, appropriate terminators, as well as host-specific system plug connectors.

Texas Instruments, Inc., Semiconductors
Dallas, TX 75243
Nov 15, 2004 Series PCIx515 consists of 4 pin-compatible units suited for connectivity of notebook and desktop PCs, consumer electronics, industrial control, and other PC-based applications. Units support single CardBus slot and include PC Card socket controller that provides bridging between PCI bus and PC Cards. For 1394 applications, PCIx515 family provides one 1394a 400 Mbps port. For security and e-commerce applications, units offer single slot Smart Card interface using GemCoreâ„¢ Technology.