Magnatag Visible Systems
Macedon, NY 14502
Mar 02, 2007 With 4 x 6 ft magnetic Production Efficiency-Tracker(TM) Board, production rates can be charted and tracked hourly for 24-hr day and translated into 31-day and year-long graphic line-chart summaries. Managers and employees can see not only if production goals are being met, but also performance figures and individual action assignments. Board includes magnets, dry-erase pens and markers, PreciseLine(TM) chart line tape and adhesive letter and number sets, cleaner, and board wipes.

ICS Electronics Corp.
Pleasanton, CA 94588
Feb 28, 2007 Used for controlling test instruments and collecting data, Model 488-USB2 converts any PC with USB 1.1/2.0 interface into full-function, IEEE 488.2-compatible bus controller. Plug-and-play device operates from any open GPIB connector and has 1 MBps data rate. Along with 488.2V3 Driver Library that supports up to 16 GPIB Controllers, product comes with Explorer utility that automatically locates, displays, and configures GPIB controllers and devices in system.

Microchip Technology, Inc.
Chandler, AZ 85224 6199
Feb 01, 2007 PICkit(TM) Serial Analyzer enables design engineers to interface with circuits embedded deep within serial systems using any Windows®-based PC. It features 28-pin demo board with PIC16F886 Mid-Range 8-bit microcontroller, and GUI software allowing communication between PC and several industry-standard serial protocols on microcontroller tested, including I2C(TM), SPI, and USART. Source code and MPLAB® IDE integrated development environment are also included.

Delta Tau Data Systems
Chatsworth, CA 91311
Feb 01, 2007 Advantage 900M CNC allows use of non-proprietary MACRO (Motion and Control Ring Optical) ring, available in fiber-optic (100-Base-F) and twisted-pair electrical cable (100-Base-T) formats. Offering PC front end with real-time servo performance, control combines operator console with ability to interface up to 32 axes of distributed motion hardware in 16 coordinate systems via fiber or RJ-45 communications ring. Transmission rate updates every link on ring at frequencies over 40 kHz.

Moore Industries International, Inc.
North Hills, CA 91343
Dec 14, 2006 Available in simplex (non-redundant) and duplex (redundant) models, FPS200 TRUNKGUARD Fieldbus Power Conditioner provides conditioned power in general purpose and non-incendive applications. Simplex configuration allows up to 8 modules to be installed on single DIN-rail carrier, with each module providing 350 mA at 26 V of isolated power, fully compliant with FF831-1 specification. Duplex configuration provides redundant, load-sharing, and hot-swappable power conditioners.

Nippon Pulse America, Inc.
Radford, VA 24141
Nov 01, 2006 With output current up to 1.2 A/phase (peak), Model NPAD10BF is capable of driving 2-phase stepping motors. It has input voltage range from 12-30 Vdc and measures 41.3 x 43.74 mm at its widest points. Bipolar chopping driver board includes automatic current reduction function and reset for sequence and disable. Product offers isolated input signals like pulse, direction, enable, and reset and can be mounted onto back of NEMA Size 17 motor.

Moore Industries International, Inc.
North Hills, CA 91343
Oct 31, 2006 ATEX-certified TG300 TRUNKGUARD Device Coupler connects FOUNDATION Fieldbus H1 or PROFIBUS PA fieldbus devices in flameproof Zone 1 and 2 locations. Available in 4 or 8 fieldbus device models, coupler can accommodate additional field devices and link with other units to power as many devices as segment can support. TG300 has short-circuit protection, Automatic Segment Termination, and LED status indicators.

Bosch Rexroth Corp., Corporate Headquarters
Hoffman Estates, IL 60192-3707
Oct 27, 2006 Suited for high-production machining centers, rack-mounted IndraMotion MTX compact CNC controls up to 8 axes in 2 NC channels with IntraLogic PLC. It can process up to 200 NC blocks per second and has 30-block look-ahead rate. Unit comes with SERCOS drive communication, full Profibus DP master/slave interface, local fast I/O, and 1 Ethernet interface port. Operation and programming are complemented by network communication via Ethernet TCP/IP or standard fieldbuses.

Pepperl + Fuchs, Inc.
Twinsburg, OH 44087 2245
Oct 27, 2006 Suitable for FOUNDATION Fieldbus and Profibus installations, Advanced Diagnostic Module for FieldConnex® Power Hub generates network documentation for each segment and device and controls fieldbus by monitoring physical layer. Built-in oscilloscope can be set to trigger on numerous events, allowing maintenance personnel to pinpoint fault locations from control room utilizing Device Type Manager. During commissioning, ADM makes snapshot of communication quality for trending changes over time.

Performance Technologies Inc.
Rochester, NY 14620
Oct 20, 2006 With integrated GoAhead SelfReliant® high-availability middleware, 10 GB and 1 GB AdvancedTCA® and 1 GB CompactPCI® Advanced Managed Platform(TM) products provide equipment manufacturers of telecommunications and defense and homeland security systems with means to accelerate deployment of mission-critical applications. Features such as resource discovery and system model instantiation, hot swap and alarm management, and shelf manager integration eliminate time-consuming tasks.

California Micro Devices
Milpitas, CA 95035
Oct 18, 2006 Model CM5100 includes VESA Standard Mobile Display Digital Interface (MDDI) based serial client consisting of one data pair, strobe pair, and power supply pair enabling data rate of up to 385 Mbps. Integrated display controller has embedded memory supporting primary TFT LCDs for resolutions up to QVGA, while secondary displays support up to QCIF+ resolution. Audio packets are transferred through MDDI pipe and can be redirected to local stereo audio codec through I2S interface.

Moore Industries International, Inc.
North Hills, CA 91343
Oct 06, 2006 Providing redundancy and automatic switchover in case of segment fault, TRUNKSAFE(TM) fieldbus system helps prevent loss of segment and potential process failures. Unit consists of 2 redundant TPS200 fieldbus power conditioners, 2 fieldbus cables, and 1 TS200 fail-safe device coupler to handle 6 or 10 fieldbus devices. System also offers hard-wired alarm to alert plant operators about cable fault, while LEDs indicate exactly which cable and what type of fault has occurred.

Woodhead Industries Inc.
Deerfield, IL 60015
Sep 01, 2006 Suited for applications where in-cabinet mounting, high-density I/O count, and modular design are required, IP20 BradControl(TM) Block I/O System connects industrial I/O devices to PLC or PC controller over industrial network. It is comprised of network adapter and up to 32 expansion modules mounted in enclosure. Ribbon cable-based expansion bus, which handles inter-module communication, operates at 11 MBaud and can accommodate up to 10 groups of modules.

Pepperl + Fuchs, Inc.
Twinsburg, OH 44087 2245
Sep 01, 2006 Supporting redundant 24 V power, Model KLD2-FBPS-1.25.360 galvanically isolated Foundation Fieldbus power supply provides 25 V and 360 mA of supply current with minimal heat dissipation, allowing modules to be mounted adjacent to one another without concern for spacing. Passive power conditioning (signal filter) makes it suitable for single segment power needs, and it supports connection to mobile advanced diagnostic module for physical layer diagnostics.

B & R Industrial Automation Corp.
Roswell, GA 30076
Aug 28, 2006 Comprised of base module, power supply module, and fieldbus interface, 1.5 in.-wide X20 bus controller enables real-time Ethernet cycle times of 200 µs. Entire bus-independent backplane can be preinstalled, and 2 RJ45 interfaces make daisy chain wiring possible. To transfer or receive I/O data on fieldbus, bus controller works by configuring fieldbus master and does not need to be programmed. Product is fully synchronized to network and all axes connected to it.

Amptronix, Inc.
Walnut, CA 91789
Aug 28, 2006 Model AWPE-790 P4 Plasma/LCD Display Engine mounts to back of 19-56 in. flat panels and allows centralized control of content, scheduling, and delivery of multimedia content. Features include built-in Intel 82545GV chipset with built-in AGP 4-graphics, Ethernet, 2 PCI slots, TV/DVI add on card, and optional pre-installed Window XP embedded system. Output can be optimized to support 4:3 and 16:9 display resolutions and perform 2D/3D graphics.

Num Corp., Schneider Electric
Naperville, IL 60563 1452
Aug 08, 2006 Configured with CNC, motors/drivers, and software, Gear Control Systems include embedded machining cycles for gear hobbing, shaping, or grinding. Automatic gear/tool alignment is governed by graphical and conversational menu-driven HMI. With Simple Electronic Gear Box package, CNC synchronizes cutter rotation and axial tool motion with rotation of work piece. With Full Electronic Gear Box package, CNC adds tangential tool movement to synchronization of Z and C axes.

Moore Industries International, Inc.
North Hills, CA 91343
Aug 02, 2006 Available with 4, 8, or 10 fieldbus spurs, TG200 TRUNKGUARD(TM) Series uses fold-back technique to disconnect shorted instrument from fieldbus segment and prevent complete segment failure. Automatic Segment Termination feature, also included, simplifies commissioning and startup by eliminating problems caused by over- or under-termination. Series works with FOUNDATION fieldbus H1 and PROFIBUS PA interfaces, and up to 32 fieldbus devices can be accommodated in one segment.

Inter-Tel, Incorporated
Tempe, AZ 85281
Jul 17, 2006 Built on Linux OS, Inter-Tel® CS-5600 supports up to 250 IP endpoints per site along with 96 digital and analog phones through optional digital expansion interface. Network communications solution has dual 1U form factor and fits into standard data racks. Along with scalable support for matching company growth, product offers built-in networking and 3 modular bays for trunks. It is designed to interoperate with Inter-Tel's IP-powered applications.

Digital View, Inc.
Morgan Hill, CA 95037
Jun 28, 2006 Fully buffered, multi-sync Model SVH-1920 provides analog and digital connection for TFT LCD panels up to WUXGA resolution. Featuring full screen image expansion of lower resolutions, image flip and invert functions, and onscreen PIP functions, unit supports High-Definition Serial Digital Interface adapter for professional and broadcast video applications. Module enables SVH-1920 to support 2 channels of HD-SDI input and provide regenerated output for upstream HD-SDI services.