Red Lion Controls
York, PA 17402 9428
Oct 31, 2007 Data Station Plus and Modular Controller product series are available with XCDN DeviceNet option card, which adds DeviceNet Slave connectivity. Added to expansion slot during installation and configured using Crimson(TM) 2 software, isolated XCDN option card promotes complete system integration and data transfer. Both series feature multi-protocol converter combined with 3 serial ports and one Ethernet port. Additional features include Web server and IT-ready data logging.

Mosaic Industries
Newark, CA 94560
Oct 26, 2007 Featuring 4 dedicated digital inputs and up to 16 more channels that can be configured for either input or output, Digital I/O Wildcard adds programmable digital I/O to controller. Each I/O line is configured for pull-up, pull-down, or tri-state operation. Power I/O Wildcard can be used to interface high-voltage peripherals to instrument or to drive stepper motor, and offers 8 high-current outputs and 4 high-voltage digital inputs. Inputs and outputs are optically isolated to ±2,500 V.

Pepperl+Fuchs
Twinsburg, OH 44087
Oct 22, 2007 FieldConnex® High Density (HiD) Power Hub includes motherboards and power supplies that use 25 V to supply 360 mA load output. They offer heat dissipation of less than 2 W, and can be mounted in any direction. Choice of motherboards exist to fit any control system, and can be pre-installed using connectors with retaining screws or tailor-made versions with system plugs of DCS. Two power supply modules are load sharing, and can be plugged into motherboard's sockets when system is energized.

Opto 22
Temecula, CA 92590 3614
Oct 15, 2007 Model SNAP-PAC-S2 is standalone programmable automation controller (PAC) that includes 4 serial ports, each of which is fully configurable for either RS-232 or RS-485 serial communication. Compact unit also comes with two 10/100 Mbps Ethernet interfaces for host and I/O communication. It features 32-bit multitasking processor with floating point unit, 32 MB of RAM, 16 MB of flash memory, 8 MB of battery-backed RAM, and supports multiple communication protocols.

Surf Communication Solutions, Inc.
Arlington, MA 02474-8401
Sep 21, 2007 Combining audio, video, fax, and modem conversion engines, SurfWare-Media(TM) v5.0 is supplied with AMC and PCI Express resource boards, PTMC DSP farm board, PCI card, and DSP chip-level solutions. Text Overlay supports display of dynamic text using TrueType fonts on video images, while Network Smoothing maintains constant bit rate for video streams for each type of network data interface. Speech Time Scaler supports voice file streaming at speeds 50-200% of original recorded rate.

GE Fanuc Automation
Charlottesville, VA 22911
Aug 09, 2007 Designed to control general industrial machines, 8-axis Power Mate i - Model H automatically selects and executes position control based on positional control command when no force is applied to axis, and automatically selects and executes pressure control based on pressure command when external force is applied to axis. Function is useful for performing press-fitting of pins, die-cushion of servo press, or bending of sheet metal.

GDA Technologies, Inc
San Jose,, CA 95131
Aug 01, 2007 PCI Express Gen 2 Controller (GPEX-2) IP features scalable, configurable design targeted for end-point, root complex, switch, and bridge implementation in desktop, server, mobile, networking, and telecom applications. Independent of application logic, PHY designs, implementation tools, and target technology, solution supports range of data widths (32, 64, 128) and configurable lanes (x1, x2, x4, x8, x16). Flexible backend architecture allows for integration into range of applications.

Marvell Semiconductor Inc.
Santa Clara, CA 95054
Jul 24, 2007 Supplied in 64-pin QFN or 7 x 7 mm 48-pin packages, Yukon® FE+ 88E8040 PCI Express (PCIe) Ethernet controller minimizes space required to implement LAN-on-motherboard in mobile and desktop PCs by integrating passives, voltage regulators, and EEPROM. Unit offers EnergyStar compliance and supports capabilities such as IPv6 and IPv4 checksum offloads as well as Receive Side Scaling. It also supports Marvell Virtual Cable Tester®, providing advanced cable diagnostics.

TURCK, Inc.
Plymouth, MN 55441
Jul 18, 2007 Suited for pharmaceutical, chemical, and material handling industries, FDP20 I/O Stations are available in versions with 16 inputs, 16 inputs/outputs, and 8 inputs paired with 8 inputs/outputs. Glass-filled nylon housing with integrated DIN-rail connector provides IP 20 protection and makes stations suitable for integrating I/O in existing panels onto PROFIBUS. Nine-pin female D connector provides connection to PROFIBUS-DP, and all power is derived from separate power source.

VersaLogic Corp.
Eugene, OR 97402
Jul 17, 2007 Available for standard and custom functions, RoHS-compliant Serial Peripheral eXpansion(TM) (SPX(TM)) modules implement SPI Bus that operates on 14-pin interconnect cable. Offerings include 8-channel analog input module, CANbus controller, 4-channel analog output module, TTL I/O port expansion, and 8-channel solid state switch. Up to 4 SPX modules, of identical or different functionality, can be used per system (bolted to host board or located up to 2 ft away).

WhereNet Corp.
Santa Clara, CA 95050
Jun 29, 2007 WhereNet® Marine Terminal Solution v4.0 includes Visibility Software Server middleware and container tracking application-specific software. Hardware infrastructure consists of WhereLAN(TM) locating access points and WhereTrack(TM) controller which integrates RFID transmitter, GPS receiver, and Wi-Fi modem. For sites without Wi-Fi coverage, controller utilizes narrowband modems or ISO 24730 RTLS channel for communication back to server.

Adax, Inc.
Berkeley, CA 94710
Jun 27, 2007 Based on Wintegra Winpath2 Processor technology, Model ATMIV AdvancedMC broadband communication controller offers 4 OC3/STM-1 or 2 OC12/STM-4 trunks and is suitable interface to process ATM and IP signaling and bearer traffic. Board and driver provide AAL2/5 to UDP/IP interworking, IP routing and forwarding over ATM, AAL2, and AAL5 termination, and AAL2 and AAL5 switching. High bandwidth carrier applications include wireless 3G and 4G, and networks such as RNCs, MSCs, and Node Bs.

Toyoda Machinery USA Inc.
Arlington Heights, IL 60004
Jun 07, 2007 Allowing users to store data up to 64 different work pieces in resident memory, Model GC50 CNC grinder control is composed of hardware and software with integrated PLC. Product comes with automatic work speed, feedrate calculation, photo-enhanced maintenance instructions, and moveable pop-up windows for running position location. On-screen touch pad eliminates need for alpha-numeric keypad and makes it possible for operator to work without memorizing instruction manual.

Broadcom Corp.
Irvine, CA 92618
Jun 05, 2007 Suited for high volume server designs, NetXtreme II BCM57710 single-chip, dual-port converged network interface controller (C-NIC) enables simultaneous processing of network, storage, processor clustering, and management traffic on chip while enabling convergence of different traffic types over single Ethernet fabric. It is designed for bidirectional line rate performance and converges TCP, iSCSI, RDMA, and remote management traffic over 10 GbE with PCI Express® interface to host.

LSI Logic Corporation
Milpitas, CA 95035
Jun 01, 2007 Offered as turnkey board solution, SS9135 provides OEMs with means to implement 2.5 in. SATA drives in enterprise-class storage arrays, including SAS and Fibre Channel-SATA (FC-SATA) infrastructures, for near-line and tiered-storage applications. Solution is based on SS1350 Active-Active Multiplexer, which enables single-ported SATA drives to connect like native dual-ported drives. Card also offers drive power control, PHY control, and diagnostics for SATA drives.

AudioCodes Ltd.
San Jose, CA 95110
May 30, 2007 Featuring 1U form factor, nCite 1000 addresses peering and hosted VoIP applications/services for VoIP service providers that require platform capable of supporting 100-4,000 concurrent sessions. IMS-ready nCite 4000 suits larger carriers that require platform capable of scaling from 21,000-84,000 simultaneous sessions, while incurring less than 50 µsec of media latency. Both models include virtual session board controller partitioning.

Pepperl+Fuchs
Twinsburg, OH 44087
May 08, 2007 Designed for FOUNDATION Fieldbus H1 and PROFIBUS PA installations, Mobile Advanced Diagnostic Module provides exact segment and individual device data needed for fieldbus physical layer analysis without need for permanent connection. Passive input circuits and external power supply leave physical layer untouched. Also included, Diagnostic Manager offers commissioning wizard, alarming and data logging, and built-in oscilloscope for displaying in-depth detail of fieldbus signals.

Apollo Display Technologies LLC
Ronkonkoma, NY 11779
May 01, 2007 Measuring 3.1 x 3.9 x 0.3 in., RoHS-compliant DV-SLIM connects TFT LCDs to standard video interfaces and automatically converts Digital Visual Interface (DVI) signals into TTL or LVDS signals. This DVI Translator Board can be user-configured for LCDs from 5-46 in. (diagonal) with 6- and 8-bit color depth and single-channel LVDS support. Function select switches let user configure DV-SLIM for backlight inverter/LCD module combinations from VGA to WXGA resolution.

Comtrol Corp.
Maple Grove, MN 55311
Apr 30, 2007 In addition to integrating enterprise applications, devices, and PLCs, Edgeware(TM) Controller comes with DualConnectPlus technology, which simultaneously connects serial and Ethernet devices to PLCs and/or applications. It also provides filtering of string, RFID, and barcode data while extracting barcode and RFID parameters. With distributed architecture and embedded Ethernet protocols, controller enables applications such as SAP® and Oracle® to have real-time visibility of plant floor devices.

Freescale Semiconductor
AUSTIN, TX 78735-8598
Apr 18, 2007 Both MCF5221x MCUs with Full-Speed USB On-The-Go (OTG) and MCF5253 embedded processor with Hi-Speed USB OTG come with USB software stack, enabling developers to streamline design process. USB OTG gives option of using on-chip USB module as USB device or USB host. It also allows multiple USB devices to communicate without host interface. Integrating USB transceivers on chip, 32-bit ColdFire® USB devices provide integrated embedded control for designers who need USB connectivity.