Apollo Display Technologies LLC
Ronkonkoma, NY 11779
Feb 06, 2006 PRISMA II enables TFT LCDs to be connected to standard graphics/video interfaces. Input signals such as analog RGB, analog video, or DVI are converted into TFT-compliant TTL or LVDS signals. RoHS-compliant unit supports resolutions to 1,920 x 1,200 and offers auto-adjust functionality. It includes picture-in-picture and picture-by-picture, advanced HMI capability, and scaling features such as pan and zoom.

Delta Tau Data Systems
Chatsworth, CA 91311
Feb 03, 2006 Featuring open architecture, Advantage 900 CNC package combines operator console with 4-, 6-, or 8-axis controller/amplifier. It leverages capabilities of operator interface PC while utilizing real-time DSP to handle motion related tasks of CNC machine. Product supports dynamic multi-block segmented look-ahead, forward and inverse kinematics, and 5-axis programming. It comes with 15 in. LCD, wireless remote pendant, embedded industrial PC, and NC Autopilot quick setup tool.

Calmotion
Chatsworth, CA 91311
Jan 02, 2006 Powered by PIC18F8722 microcontrollers, MC104P controller modules provide access to external memory and interrupts. They can utilize various PC/104 modules that offer peripheral expansion, including serial ports, 16-bit ADCs, optically isolated I/O, Pamux I/O, VGA Video capability, modems, and support for industrial networks. With MPLAB® ICD 2 in-circuit debugger, users can single step, watch individual variable changes, set breakpoints, and program Flash memory from within MPLAB IDE.

Atmel Corp.
San Jose, CA 95131
Dec 22, 2005 Based on ATmega406 single-chip smart battery AVR® device, ATAVRSB100 Development Board uses 3 support modules to simulate individual cell voltage, total cell stack voltage, and charge/discharge current. Flash-based ATmega406 integrates voltage regulator, autonomous battery protection, 99% accurate monitoring capabilities, FET control, and cell balancing FETs. Firmware supports SMBus V1.1 protocol handling, as well as basic algorithms for charge left estimation and battery charging.

Fujitsu Microelectronics Inc.
San Jose, CA 95134 1804
Dec 16, 2005 Delivering 10 Mbps over 2 channels, application-specific FlexRay(TM) MB88121 provides fault-tolerant, deterministic data transmission, suitable for engine control, braking, and steering subsystems. It can be connected directly to existing CPUs and complements standard automotive buses, including CAN and LIN. Internal speeds reach 80 MHz with 4, 5, 8, or 10 MHz external oscillator, or by external clock. Parallel interface affords max frequency of 33 MHz.

TVI Electronics
Houston, TX 77040
Dec 14, 2005 Using ATMEGA16 microcontroller and 4 Mbit AT45DB041B Flash, Model TC51854 provides full support for Optrex F-51854 160 x 128 F-STN monochrome graphic transflective LCD with 4.7 in. diagonal viewing area for characters and/or graphics display. Independent pixel control allows user to display text and pictures simultaneously. Board includes RS-232 interface with 9 programmable baud rates, touch screen controller, animation, 4 integrated fonts, and multiple display modes.

Kontron Embedded Computers GmbH
Eching D-85386  Germany
Dec 14, 2005 Multimedia and TV flat panel controller, CRTtoLCD-7 offers RGB and DVI inputs as well as composite and S-video inputs for PAL/NTSC signals. JILII30 interface allows control of single and double port LVDS-TFTs up to data width of 2 x 24 bits, while FLEX32 allows control of 18 bit-TTL flat panels. Controller uses OSD keypad for changing settings, and is optimally equipped for video sources such as recorders, DVD players, and cable, satellite, and digital TV.

GE Fanuc Automation
Charlottesville, VA 22911
Dec 12, 2005 Designed for press machine manufacturers, 16i/18i-MB dedicated CNC control offers flexible motion paths and allows precise simultaneous operation of multiple GE Fanuc servo motors from Alpha iS series rated up to 230 kW. Fully programmable nano control, able to replace PLC and/or PC-based control, has customizable operator interface with open architecture PC-based front-end. Use of this network-capable product enables motion to be matched to work.

ICS Electronics Corp.
Pleasanton, CA 94588
Dec 05, 2005 Suited for controlling GPIB Instruments and devices over Internet or company network, Model 8065 provides access from any computer with NIC or TCP/IP interface. Server is compliant with VXI-11.2 and VXI-11.3, providing user with full control of GPIB bus and ability to perform IEEE-488.2 Controller protocols. RoHS-compliant unit, able to handle up to 15 VXI-11 links to support multiple clients, supports SRQ handling, serial polling, and SRQ notify.

Moore Industries International, Inc.
North Hills, CA 91343
Nov 30, 2005 Suited for DCS installations, ROUTE-MASTER(TM) Series 100 System features intrinsically-safe, isolated power supply with 350 mA per segment, which can drive up to 16 devices over cable segments up to 1,900 m long. Product utilizes split architecture design with device coupler mounted close to group of devices anywhere in Class I Division 1 Group C or D environments. Able to power FOUNDATION fieldbus or PROFIBUS PA devices, product features 99.99993% availability.

Performance Motion Devices, Inc.
Lincoln, MA 01773
Nov 29, 2005 Consisting of software package and integrated board with MC73110 motor control IC, Model DK73110 allows designer to build stand-alone motor controller, amplifier, or intelligent drive for brushless motor control applications. Kit incorporates velocity loop, current loop, commutation, half-bridge MOSFET switchers, and integrated motor connections. It drives 3-phase brushless motor at up to 10 A, inputs analog or digital command signals, and requires single voltage input.

Kontron Modular Computers GmbH
  Germany
Nov 11, 2005 Without requiring a PCI or AGP slot, RoHS-compliant CRTtoLCD-5 assembly converts analog RGB or DVI input signals into digital TTL or LVDS signals for TFTs. Integrated Genesis gm5621 chip provides resolutions up to SXGA. Able to process input resolutions up to UXGA and scale image to appropriate size for panel, assembly is available with FLEX32 interface for control of 18-bit TTL flat panels or JILI30 interface for control of single- and dual-port LVDS TFTs up to data width of 2 x 24 bit.

RoboteQ
Phoenix, AZ 85022
Nov 02, 2005 Microcomputer-based, dual channel Model AX1500 directly drives up to 30 A on each channel at up to 40 V. Fitted on 4.2 x 4.2 in. board, controller accepts commands from R/C radio or serial port interface. Two channels can be operated independently or combined to set direction and rotation of vehicle. Intelligent current sensing and controlling limits each channel's power output to 30 A for typical time required to accelerate or stop robot.

Hayward Industrial Products Inc., Hayward Flow Control Systems
Clemmons, NC 27012
Oct 21, 2005 Used in piping systems with 8 or more electrically or pneumatically actuated valves, Bus Control System allows all actuators in system to be controlled by PLC with one pair of wires. Actuators are daisy chained on same pair of wires, with each actuator assigned unique address for identification by PLC. Only designated actuator has ability to read and act on control instructions. In addition to control simplification, system also reduces wiring complexity.

National Instruments Corp.
Austin, TX 78759-3504
Oct 18, 2005 ExpressCard-GPIB delivers direct control of GPIB instruments from laptop computers with ExpressCard slot, which accepts modules based on USB 2.0 or PCI Express. To communicate with GPIB instruments at transfer rates of up to 8 Mbps, product incorporates TNT GPIB ASIC and Hi-Speed USB chip. Controller interface is transparent to software applications and drivers, and unit comes with NI-488.2 for Windows 2000/XP driver software and 2 m GPIB cable.

Arcom Control Systems
Overland Park, MO 66085
Oct 17, 2005 Designed for PXA255 ARM/XScale-based VIPER, QNX Neutrino 6.3 BSP includes drivers for integrated PXA255 graphics controller, Ethernet port, 5 serial ports, onboard 32 Mbyte Flash memory, real-time clock, 256 K battery-backed SRAM, audio codec, PC/104 bus, and TSC1 analog touchscreen controller. With operating temperature of -40 to +85°C, VIPER is suited for applications in industrial control and airborne communication systems.

FiveCo
Lausanne 1015  Switzerland
Sep 16, 2005 Providing power from 15-48 V, 10 A, Model FMod-IPECMOT 48/10 encompasses both motor controller and power level. It uses standard Ethernet protocols including TCP-IP, UDP, and HTTP. By using FSoft-MOTORCTRL software, user can configure various parameters and test system simultaneously. Integrated regulator allows for control in position as well as in speed, based on motor's encoder. For brushless motors, Hall sensors can be directly connected to card.

Siemens AG
Munich D-80333  Germany
Aug 24, 2005 Simatic ET 200pro is available with line starters and reversing starters, both with diagnostics options as well as electronic overload protection. Motors and loads up to 5.5 kW are connected directly to motor starters, which in turn are connected to Simatic ET 200pro distributed I/O system for integration in Profibus or Profinet communications network. Starters have IP 65 protection and are suitable for cabinet-free installation and use directly on machine at local level.

Sercos N.A.
Santa Rosa Beach, FL 32459
Aug 10, 2005 Based on Spartan-3 FPGA platform of Xilinx, SERCON100 controllers for SERCOS III include hardware functions such as timing, synchronization, and processing of cyclic and non-cyclic data on basis of 2 integrated Ethernet MACs. Master and slave controllers, available for Spartan-3 FPGA with 400K system gates, are integrated in FT256 BGA housing. Also offered, SERCON100S Slave Controller is available for Spartan-3 FPGA with 200K system gates in TQ144 housing.

Advantech Automation Corp.
Cincinnati, OH 45240
Jul 01, 2005 ADAM-6501 Communication Controller has 400 MHz Intel® XScale® processor. Equipped with CompactFlash® slot, controller can be expanded with additional file storage or other CompactFlash form factor devices like modems or WLAN cards. Embedded web server, FTP server, and telnet server allow creation of remotely operated controller. ADAM-6501 has embedded Microsoft® Windows® CE .NET 4.2, 32 MB onboard flash memory, 64 MB SDRAM with option to bundle with web-enabled HMI/SCADA software.