Controls & Controllers

Controls & Controllers, Electronic Components & Devices

Low Dropout Regulator comes in SC-70 package.

Dec 27, 2001

Model TC1016 can replace SOT-23 LDOs. It has low dropout voltage of 150 mV at 80mA and supply current of 50 µA. Output voltage accuracy is ±2.5% max, and shutdown mode reduces power consumption to as low as 0.05 µA. Applications include PDAs, pagers, laptops, CO2 detectors, Flash modules, PCMCIA cards, bar code scanners, cameras, and other small, battery-powered devices. Read More

Controls & Controllers

Welding Inverter provides soft or crisp MIG arc control.

Dec 21, 2001

Invertec V350-PRO has integrated control panel that eliminates cable clutter and pendant confusion. Constant power MIG mode adjusts voltage and current for smooth welding of thin sheet metal. It has pulse programs for steel, stainless steel, aluminum, 4043 and 5356 alloys and nickel. Unit offers output on single phase or three phase input power. It produces constant current or constant voltage... Read More

Controls & Controllers

Servo Drive is optimal for use with linear motors.

Dec 21, 2001

DR100EE25A20NAC is capable of encoder-based sinusoidal commutation of linear servomotors, with or without Hall sensors. 20 kHz digital current loop utilizes Space Vector Modulation switching techniques for higher current loop bandwidth and low heat dissipation. Drive configuration and tuning are accomplished via graphical Windows-based utility using RS232/485 serial port. Unit accepts supply... Read More

Controls & Controllers, Mechanical Power Transmission

AC Drive controls motors up to 3.7 kW.

Dec 19, 2001

PowerFlex 4 is available in power ratings from 0.2 to 3.7 kW and in voltage classes of 115, 230 and 480 volts. It features integral keypad with local potentiometer for control. RS485 communications make drive compatible with DriveExplorer and DriveExecutive software when using serial converter module. Drive is available in IP20 package that can be DIN rail or panel mounted. Zero Stacking(TM)... Read More

Controls & Controllers, HVAC

Blowers, Fans and Thermostat come in different models.

Dec 17, 2001

3-phase 200 to 230 Vac blower models MB810-T and MB1225-T have impeller diameters of 3.15 and 4.72 in., respectively. MB810-T produces maximum airflow of 56.5 cfm at 2800 rpm to 63.6 cfm at 3350 rpm, while MB1225-T produces 155 cfm at 2850 rpm to 184 cfm at 3300 rpm. MBD Series DC centrifugal blowers include blowers with both 3.15 and 3.94 in. impeller diameters. Airflows range from 51.2 cfm at... Read More

Controls & Controllers, Electronic Components & Devices

Buck Regulator is over 85% efficient.

Dec 13, 2001

MIC4684 buck regulator's boost capacitor increases available voltage to saturate internal power switch. Regulator has input voltage range of 4 to 34V and 1.5A output current. Built-in safety features include cycle-by-cycle current limit, frequency foldback short circuit protection, and thermal shutdown. It is available in adjustable output voltage version. Read More

Controls & Controllers

Digital Valve Driver works with valves, motors and pumps.

Dec 13, 2001

Programmable DVD-2 pulse width modulated (PWM) solenoid driver can control any brand proportional valve, motors, pumps or other device that responds to PWM signals. Software-based unit operates by processing low power analog input signal to produce corresponding high power, high efficiency PWM output signal. Source of analog signal could be control levers, potentiometers or PLC. Unit comes in... Read More

Controls & Controllers, Electrical Equipment & Systems

Sensing and Timing Relay is capable of dual timing.

Dec 11, 2001

Series ST Sensing and Timing relay is used for level sensing applications that need to detect 1 level of a liquid. Features include optional ON-DELAY, OFF-DELAY or SINGLE SHOT timing; 115 VAC input; transformer isolated sensing circuit; and voltage protected sensing input. Resistance sensing is rated at up to 10 Megohms. Additional features include sensing and output LED indicators, 10 AMP SPDT... Read More

Controls & Controllers

Motor Controller offers stand alone operation.

Dec 11, 2001

DR16 bipolar step motor controller features programmable full, half, quarter and eighth steps. Motor current is selectable between .03 and 1.5 amps with motor voltages to 48 volts. Velocities can be greater than 55,000 steps per second with 0.001 steps per second resolution. Moves can be absolute, relative, continuous, or alternate. Controller features RS-232 serial port and selectable baud rates... Read More

Controls & Controllers

Motion Controller Board handles 4 axes simultaneously.

Dec 11, 2001

Double size PC-MIP board can be used on CompactPCI, PCI, VME and embedded platforms with high speed PCI bus interfaces. Chipset supports steppers, sinusoidal commutation of brushless motors, and positioning and velocity control of brush servo motors. Any axis can be selected to be brush or brushless. Instruction set supports 130 commands plus selectable profiling modes including S-curve,... Read More

Controls & Controllers

Low Power Display works in handheld applications.

Dec 11, 2001

DV5520 is suitable for battery-powered applications where harsh environment is likely to be encountered, such as mobile data collection devices and handheld instruments. Display survives temperatures from -20 to 70 °C and humidity of 90%RH. It measures 53 x 65 x 2.8 mm and has monochrome 132 x 64 pixel graphics display with effective display area of 50 x 30 mm. MTBF is 50,000+ hr. Current... Read More

Controls & Controllers

Motion Control Chip drives stepper motors.

Dec 11, 2001

2-axis PCD-4521 controls two-phase unipolar or bipolar stepper motors. Sequence logic for both full and half-step modes is built-in. It can output CW/CCW pulses or excitation signals directly to drive chips, provides independent control of each axis, and controls simultaneous start and stop of all axes. Features include linear or S-curve acceleration and deceleration and idling pulse output for... Read More

Controls & Controllers

Contouring Control fits cycle-controlled lathes.

Dec 10, 2001

MANUALplus 4110 control program machines complex workpieces on lathes with one spindle, X and Z axes, C axis or positioning spindle, and driven tool. Supporting interactive lathe operation and G-code, it performs simple operations like manual lathe. For complex contours, graphical Interactive Contour Programming calculates missing coordinates or shows mathematically possible variants so user can... Read More

Controls & Controllers, Electronic Components & Devices

DC-DC Controller has adjustable output.

Dec 10, 2001

FAN5250 accepts input voltages from input sources, including ac wall brick adapters and battery packs ranging from 5 to 24 V. Unit performs synchronous conversion to provide over 5 A loads in typical applications. Output is adjustable by a 5-bit VID DAC between 0.6 and 1.75 V, using a low-drift onboard reference with accuracy of better than 1%. FAN5250 is available in a 24-pin QSOP package,... Read More

Controls & Controllers

Control System optimizes engine performance.

Dec 05, 2001

Engenius ESM Engine System Manager, directed by Engine Control Unit (ECU) monitors speed, pressure, temperature and other engine conditions; controlling ignition timing, speed governing and stop/start functions. It also provides diagnostic help and fault logging when requested. System can be packaged to instantly communicate to Internet server, computer, phone or pager via satellite, cellular... Read More

Controls & Controllers, Mechanical Power Transmission

Worm Gear Drives provide ratios from 1:1 to 60:1.

Dec 05, 2001

DAW Series multi-speed transmissions will shift on-the-fly under full load. Model DAW is rated at up to 50 input HP at 1800 RPM and comes in 4 basic configurations. DAW-S is single input with single output shaft; DAW-SD is single input with dual output shafts that may be solid or split; DAW-DS is single input with dual output shafts and output shafts are coaxial shaft-over-shaft; DAW-SI is single... Read More

Controls & Controllers

Intelligent Controllers feature modular designs.

Dec 04, 2001

SMC-3(TM) 3-phase Smart Motor Controller includes standard overload protection with adjustable trip class, motor and system diagnostics, configurable auxiliary contacts, and multiple start and stop modes. SMC-Delta(TM) reduced voltage starter is designed for star-delta (6-lead motor) applications. It incorporates transitionless start, and combines contactors, overload relays, timers, and internal... Read More

Controls & Controllers

Controller-Sensors connect directly to control valve.

Dec 04, 2001

Combining sensor, control, and communication functions, intelligent sensors can eliminate need for PLCs. Available in plastic, brass, or stainless steel, sensors have local gauge readout and 4 to 20 mA output process signal, and provide local or external programmable setpoint via AS-i Fieldbus connections. Devices have LCD programming interface for set-up of controller and connection to process... Read More

Controls & Controllers

LCD Panel operates over wide temperature range.

Dec 03, 2001

MAXIMISER2 1/2-VGA display module works in temperatures of -20° to 70º C. Fully addressable graphics panel has 480 x 320 dot resolution, provides bright, clear display, and can be used in low-light conditions. It has built-in backlight for operating in darkness. Active display area is 115.2 x 76.8 mm, with overall module size of 144 x 94.9 mm. Connections are via one, 20-pin connector for... Read More

Controls & Controllers

Motion Control Chipsets synchronize multiple axes.

Nov 28, 2001

Navigator and Pilot chipsets control brushed dc servos, brushless dc servos, steppers, and microsteppers. Navigator handles 4 axes, while Pilot handles 1. Multi-chip synchronization allows more than 4 axes of motion to be coordinated between any combination of Navigator and Pilot chips. It also allows physically remote or distributed chips to be synchronized within microseconds so they can be... Read More