Controls & Controllers

Controls & Controllers

Controller/Driver controls 4 stepping motors at once.

January 18, 2002

Integrated MCB-4B board simultaneously controls up to 4 stepping motors with mini-step capability, and with 4, 6 or 8 leads and up to 3 amp phase current. Each axis is addressable, and several boards can be controlled by single computer communication port. MCB-4B offers stepping rates up to 50,000 step/sec and up to 16.7 million steps per move. It includes programmable acceleration/deceleration,... Read More

Controls & Controllers

Spanner Module offers visible rotary address switches.

January 18, 2002

FDN-DN1 Spanner module provides means to route data between 2 PLCs using DeviceNet(TM). By connecting DeviceNet networks directly, it eliminates needs for high-level control network pyramids. FDN-DN1 appears to each PLC as standard rack of I/O. Any DeviceNet scanner can send I/O data to Spanner module without additional software or complex configuration procedures. It is capable of transferring... Read More

Controls & Controllers, Mechanical Power Transmission

Motor and Driver includes onboard electronics.

January 17, 2002

MDrive34 uses NEMA 34 frame size 1.8° motor combined with microstepping drive, and accepts up to 14 resolution settings from 1/2 to 256 microsteps per step. Setup parameters include Microstep Resolution and Run-and-Hold currents, and can be changed on-the-fly or downloaded and stored in non-volatile memory with GUI. Operating voltage is +24 to +75 VDC. MDrive34 is available in single stack,... Read More

Controls & Controllers

Press Control requires no NC programming.

January 17, 2002

Optifeed-C system controls roll feed, provides digital synchronization between start time and main drive of press, and maximizes number of strokes of press line. Predefined and selectable functions include automatic feed adaptation, start-point displacement, programmable switch cam group, and setpoint output for coil processing. Only inputs required are process specific inputs, including length,... Read More

Controls & Controllers

Serial Bus System includes Profibus-DP protocol.

January 17, 2002

FlexSAM modular communication package offers direct control of up to 32 inputs and 32 outputs without discrete wiring of remote operating valve manifolds. Input modules accept NPN or PNP inputs without circuitry or wiring changes. System includes output diagnostics for auto detection of short circuits, built-in emergency stop that turns off all outputs while keeping communications and inputs... Read More

Controls & Controllers, HVAC

Temperature Controller works in water systems.

January 17, 2002

Microprocessor based 1/16 DIN PID controller provides precise, stable, straight-line control in circulating water temperature control systems. It has autotuning, thermocouple and RTD inputs, programmable soft start, dual LED display of setpoint and liquid temperature, and menu-driven operation. Other applications include temperature control systems in plastics, chemical, packaging, and food... Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Miniature Regulator is diaphragm operated.

January 17, 2002

Brass-body Model 20R has non-rising adjusting knob and flow rates up to 1.25 GPM. Regulator is available in 1/8 and 1/4 in. NPT port sizes. Compact, rugged body measures 3.06 x 1.56 in. and is rated for pressures up to 125 psi. Regulator is suitable for water service applications. Read More

Controls & Controllers

Contouring Control machines complex geometries.

January 17, 2002

With its digital motor control, iTNC 530 produces programmed contour on workpiece. Programs written at remote locations containing large amounts of data can be transmitted at high transfer rates over Fast Ethernet interface. Blocks can be inserted and modified in seconds. For machining complex geometries, control offers fixed cycles that simplify programming. Block processing time is 0.5 ms. Read More

Controls & Controllers

AC Drive is available in 600 Vac rating.

January 17, 2002

GPD 506/P5, rated for 200 HP at 600 Vac, includes keypad and display for input and monitoring of operating parameters. Network communication is provided through RS-232 serial communication port. Drive features momentary power loss override, overtorque and undertorque detection, multi-step speed operation and accel/decel time selection. Protective functions include motor overload, overheat,... Read More

Controls & Controllers

Servo Drive connects via CANopen interface.

January 17, 2002

DC201E25A20NAC digital servo drive uses CANopen communications for use in networking applications. Built-in interface complies with DS301 and DSP402 standards. Drive uses DSP to close digital current, velocity, and position loops for controlling brushed or brushless servomotors. Position and velocity loops can use encoder, Hall sensor, or analog feedback. Drive has output of 25A peak, 12.5A... Read More

Controls & Controllers

Hybrid Control is expandable.

January 17, 2002

Gemini GEM-X255 Hybrid Panel provides up to 255 fully programmable hardwire/wireless zones and 195 individual user codes. It offers fuseless maintenance-free operation, 8 independent area partitions, 255 event scheduler, and 800 event log. Panel supports 2-wire and 4-wire smoke detectors and up to 64 separately addressable X-10 devices with GEM-X10KIT. Read More

Controls & Controllers

Dual PWM Controller simplifies design of memory systems.

January 14, 2002

FAN5236 dual synchronous switch-mode power supply controller offers solutions for bus termination in high-speed memory systems using DDR-1, DDR-11, or HSTL interfaces. It provides VDDQ core and VTT termination power, buffered VREF output, and allows users to cascade multiple devices. VTT output sources and sinks up to 3A, tracking VDDQ/2 to within ±2%. VREF output follows VTT within ±40mV.... Read More

Controls & Controllers

Display Console houses multiple monitors.

January 14, 2002

Modular Profile(TM) Flat Panel Display System consists of interactive desk and console system that permits maximum screen viewing while minimizing floor and vertical space requirements. It supports 1,200 lb of components and IT gear, has adjustable arm mounts to provide ergonomic positioning, and routes all cabling and power cords. Applications include network operation centers, security, command... Read More

Controls & Controllers

Automation Controller provides web access.

January 11, 2002

Web enabled 5100 Series Blue Fusion controller supports IT and Web standards, including HTTP, XML, SOAP, and SMTP, providing direct read/write access to industrial data from desktop browsers. With its built-in 10/100 Base T Ethernet port, controller can be connected to Internet and/or existing intranets. DIN rail mountable controller has high-speed digital and analog I/O and high-performance... Read More

Controls & Controllers

Temperature Controller fits on DIN rail.

January 11, 2002

R6000 temperature controller accepts 8 channels of thermocouple and RTD inputs and has response time of 100 msec for 8 control zones. It features RS485, Modbus, Profibus DP, CAN and CANOpen interfaces; 16 digital I/O that are configurable for any zone; and LED status display for I/O. Four analog outputs are available as option. Applications include plastics injection molding, plastics extrusion,... Read More

Controls & Controllers

HVAC Drive can be mounted outdoors.

January 8, 2002

Class 8839 ECONO-flex Type 3R Adjustable Speed AC Drive features thermal management system that permits equipment operation in -10 to +50 deg C ambient temperatures. Coordinated circuit breaker provides short circuit protection. Motor isolation and bypass contactors have mechanical and electrical interlock to prevent accidental backfeeding. Drive is pre-programmed for HVAC variable torque... Read More

Controls & Controllers

Welding Control includes Active Part Conditioning.

January 7, 2002

Model DC25 linear DC resistance welding control has built-in monitor for precision control of miniature and micro-miniature parts. Weld energy may be programmed in current, voltage, or power in increments down to .01 milliseconds. Unit runs on single-phase line voltage, and features user interface and real time energy display. Linear control circuit provides instantaneous updates of welding... Read More

Controls & Controllers

Plastic Control Valves feature bellows seals.

January 4, 2002

Model l000B series low-flow control valves, available with PTFE bellows seals are suitable for corrosive applications. They feature all-plastic construction, various Cv's, and pneumatic or electronic operation. Permeation-resistant PTFE bellows seal is designed for use in hazardous or corrosive environments; back-up stem seal packing arrangement is incorporated in each valve for additional... Read More

Controls & Controllers, Sensors Monitors & Transducers

Position Control Sensors feature ASCII serial protocol.

January 4, 2002

Temposonics® S Series ServoSensors combine sensor and embedded closed-loop position controller. ASCII protocol and Windows(TM) application setup software enable use of common translator software. Model SH rod style sensors are designed for internal mounting where high pressure conditions exist (5,000 psi continuous/10,000 psi spike). Model SP profile sensors are magnet-mounted and are used in... Read More

Controls & Controllers, Mechanical Power Transmission

Cam Followers are suited for small-to-medium sized machines.

January 3, 2002

Cylindrical Roller Cam Followers, available in sizes from 1 to 10 in. diameter, are used in applications throughout packaging, transportation, robotics and automation, and material handling. Contacting lip seals provide positive protection against contamination, while keeping grease inside. Double row cylindrical rollers provide true-running performance. Units are lubricated for life and operate... Read More